Is there an easy way to copy conditional formatting? I need to copy the same scenario so that it adjusts for each row that it's on (the way formulas do).
For instance, I need to copy cells I4:L4 all the way to rows I84:L84. And I want the rows to adjust depending on what row they're on, like formulas seem to (as apposed to referencing the original cells).
Does that make sense?
I'm running a spreadsheet at the moment in 2007, and one of the funcitons I've made it for certain cells to either change format if the number is to big or to small depending on the cell it is.
I have formatted all for one line against duplicate scores on the same line.
The problem is this is time consuming and there are 22 different lines.
Because with Conditional Formating you can't simply drag like you can with formulas, I was wondering if there was a more simple approach. I have demonstrated the formating required on Row 6, and require the same formating on rows 8:10, 14:26, 32:36.
Also, just to make things complicated, the values change for each line.
I have attatched the file. Row 6 with the label DEMO LINE contains all the correct formating I require.
I am trying to figure out how to copy and paste conditional formatting.
1371908# on hand 16458
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371908 Total416104
1371911# on hand 7053
ACNF18051 208
ACNF18061 104
ACNF30081 208
1371911 Total416104
for instance in the above.. I want to black out any number in the "total" (bold) row that is less than the On Hand Qty (bold and underlined number) and I want to use a running total. For instance for part 1371911 with an On Hand Qty of 7053, the on hand is larger than the the first total of 416 so 416 should be blacked out, it is also larger than 416+104 so 104 should be blacked out as well.
This will continue until the on hand qty is less than the running total. I can conditionally format this one at a time and it could take forever as there are 3000+ lines of spreadsheet. If there is any way that you can tell me how to set the condtional format for one row and then cpy and paste it thoughout the sheet where needed.
i have an equation in A1, and i use conditional formatting for this cell, if the value of C1 is less than 1000, the result in A1 is red
i want to copy the result and the color of A1 to D1, i use paste value, the value and the color are then copied to D1 at first. but when i modify C1, the color of D1 also changed.
In Excel 2007, is there a way to copy a conditional format from one cell to a range of cells. My conditional format is comparing the value of one cell say A1 to B1, and formatting the cell if the value is different. How do I copy this format to also compare A2 to B2, and C2 to D2 etc.
View 2 Replies View RelatedLets say I have a block of cells (lets say A1:E5) that all reference the value in the upper left hand cell (A1). Could be a formula by itself or one embedded within a conditional format. I reproduced the formula and formats in the A1:E5 block by using the absolute cell reference $A$1.
I now want to reproduce that entire block (including the referenced cell A1) multiple times on the sheet, but the catch is that each new block must reference the cell in IT'S OWN upper left hand corner. (e.g. a block located at F10:J15 must use as it's reference F10, not A1).
How can I quickly reproduce those blocks? I have done a search and replace to eliminate the $ symbols within the formulas to make them relative, but that doesn't seem to work within conditional formats.
The issue right now is I am trying to apply conditional formats to a sheet I already constructed. I don't want to overight the formulas in the UL corner, so I am trying to copy and paste the conditional formatting only. Can't seem to figure out how.
It brought up my own thread, I didn't realise it untill today, but the answer I been using uses conditional formating to highlight the lowest cells in each row. And as Sicarii pointed out earlier today you can't select a cell my color with conditional formating turned on. can I highlight some other way or can I select cells to copy some diffrent way. This is the VBA I use to select the lowest price.
Sub FIND_LOW_PRICE()
Range("a1:H6").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, _
Formula1:="=and(a1=min($a1:$H1),not(isblank(a1)))"
Selection.FormatConditions(1).Interior.ColorIndex = 6
End Sub
And this is the code that Sicarii supplied and correctly warned me will not work with conditional formating.
Sub COPY_BASED_ON_COLOR()
Dim RngCol As Range
Dim lLoop As Long
With Sheets("Sheet1")
Set RngCol = .Range("A1", .Cells(Rows.Count, 1).End(xlUp))
End With
For lLoop = RngCol.Rows.Count To 1 Step -1
If Range("B" & lLoop).Interior.ColorIndex = 6 Then
Sheets("Sheet2").Range("B" & lLoop) = Sheets("Sheet1").Range("B" & lLoop)........................
I'm trying to figure out how to copy & paste the following conditional formatting down the column.
The conditional formatting I'm using is in cell A1, D1, G1, J1, M1 (so I have to Ctrl click each cell manually & I then choose to "format the values that rank in the:" "bottom 1" & format it green.
I want to copy and paste that all the way down column A, D, G, J, & M and have the conditial formatting pick for each row, not the whole column. eg. A2, D2, G2, J2, M2... A3, D3, G3, J3, M3...
Can i copy format from conditional formatting to other sheet or cells?
View 9 Replies View RelatedI need to apply conditional formats a certain range e.g. I8:I1000. Every time my spreadsheet is loaded with new data, the previous cf are erased, and I have to start all over again.
View 7 Replies View RelatedI have this fairly simple formula which decides whether to shade a cell or not
=AND($X$1<>"TBD",R3<>"None",AC3="Y")
This is set in cell R3 and I want to copy it all the way down the cells in the R column. However, when I copy & paste (and copy and paste using paste special, formatting) the R3 and AC3 cell references do not update to match their relevant rows. eg If I highlight cell R26 the conditonal formatting formula still refers to cell R3 and AC3, not R26 & AC26. I'm using Excel 2010 but I don't recall this happening in 2003.
I want to copy cells (include conditional formatting) and paste in mspaint How can i write this code ?
View 9 Replies View RelatedI have a column "g" with this conditional formatting:- =A2<>A3 Format Bottom Border.
However I will pass this workbook onto someone else who will fill in the text in column "g". They will use copy/paste text from other cells or columns even other workbooks that will not have the conditional formatting.
I have used Cells > Projection > Locked unchecked then used Tools > Protection > Protect Sheet and checked all. There does not seem to be a way to unlock the cell but protect Conditional formatting. Each time I copy and paste from other non formatted cells it wipes out my formatting.
A little background on what i am doing. I have a spreadsheet that tracks when i have blown the dust out of our computers. I have set up conditional formatting so that the text turns red after 300 days and the cell turns yellow after 600 days. However, some computers are in high dust environments. I would like the spreadsheet to tell me to blow the dust out of these sooner. see the attached sheet.
dust 1.xlsx
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
Any VBA that I can put into a macro that will convert conditional formatting into fixed formatting..? So when the cell contents/formulas are deleted the formatting remains. Assume that the range I want to convert is A1:D200...
View 9 Replies View RelatedI need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedIn a column, there are 4 option for each cell -
"PAYMENT DUE"
"PAID"
"UNDERPAID BY..."
'OVERPAID BY..."
These are filled in by a formula
I would like to make them 4 different colours but excel only allows 3 options
I have a hard time when it comes to "If then" statements and conditional formatting. I have some data that I am collecting and entering into a spreadsheet for a couple different companies. Once I receive paperwork from those companies for the data collected I mark the data with a blue colored text. I would like to have a second sheet that generates what companies have not sent me their paperwork. "If the data is black text, then generate <name of company> on second sheet." The list is small right now, but as the project continues it will grow very large and it will become difficult to track. I will attach a copy of the spreadsheet for you to see the situation. I would like to learn how to do these types of formulas, is there a tutorial geared towards these types of situations?
View 2 Replies View RelatedI seem to have a problem using conditional formatting with Vba in Excel 2003
When I run -
Must admit the R1C1 still confuses me, but somehow I have this working. Currently the RC4 displays in conditional format as $D8 and the RC4 as $C8, but I'm confused at how it knows to start at R8? Is there any way to make the formulas read ="=$D8=""No""" instead?
View 2 Replies View RelatedI have two spreadsheet "book1" with data in it, "book2" that takes all the information from "book1" the cells are linked in "book2" from "book1" so when someone updates "book1" the information is viewable in "book2"
In "book2" where I am getting stuck is as follows,
Column A contains data "break time" that is formatted in HH:MM:SS column B contains a "total duration" in HH:MM:SS. what I need to do is if column A data is = to or more than 4% of column B then I want to turn the cell in column A "red" if it is less then turn it "green". I have tried conditional formatting and it appears to work the once only, I dont no if this is because its 2003 and not 2007??
What I need is to repeat the conditional format over and over again forever is there any code for this I can use?
I have used conditional formatting various ways to format an individual cell. I was wondering does anyone know if it is possible to conditionally format a row? Eaxmple: If D7=Manager, then format A7 through Z7. If so, how would I go about setting that up?
View 3 Replies View RelatedI'm wanting to create a formula in column B that will return a value of 10 if column A is any value between 70% -100%, will return a value of 5 if column A is any value between 50% - 69%, and will return a value of 1 if column A is any value between 1% - 49%. Can you help me?
View 6 Replies View RelatedI want to do an if (I think I do??) command so that if a1=b1, then the cell turns blue and if a1=0, the cell turns red, with the false statement just being blank.
View 3 Replies View RelatedI have data in column B.
And if the below mentioned values are present in column "B" then the cell colour should change to "RED Colour"
Bombay
Mumbai
Bangalore
if any other values other than the above mentioned then the cell format should remain as is.
I have my formulas in place and they are working. The reason why some are coming up with #DIV/0 is because I do not have the data to complete the calculation.
Is there a way to make the #DIV/0 error go away until I imput the data to complete the calculation? I was thinking there might be a way to do it with conditional formatting.
Sub Macro1()
With Range("A1")
.FormatConditions.Delete
.FormatConditions.Add Type:=xlExpression, Formula1:="=A1=B1"
.FormatConditions(1).Interior.ColorIndex = 3
.FormatConditions.Add Type:=xlExpression, Formula1:="=A1B1"
.FormatConditions(2).Interior.ColorIndex = 50
.AutoFill Destination:=Range("A1:A29"), Type:=xlFillDefault
End With
End Sub
If my active cell is NOT A1, the formula entered into conditional formatting is off. The range references get all messed up. For example, if my active cell is Say D5
Condition 1 is
=IT65533=IU65533
Condition 2 is
=IT65533IU65533
But if I run the code with A1 as my active cell, it gets entered correctly as
Condition 1
=A1=B1
Condition 2
=A1B1
I would like to add conditional formatting for the whole row based on whether the value of cells in column A is "CON".
For Each c In r
If c.Value = "CON" Then
c.EntireRow.FormatConditions.Delete
c.EntireRow.FormatConditions.Add Type:=xlExpression, Formula1:=c.Address = "OK"
c.EntireRow.FormatConditions(1).Interior.ColorIndex = 35
end if
next c
the "CON" is a formula and can later take the value "OK".
The conditional formatting should highlight the whole row as green when that happens.