I am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LC As Integer, iCol As Integer, Found As Range
iCol = 14 'column containing K
LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column
If Target.Column = iCol Then
Select Case Target.Value
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
I would like to sort rows from Sheets 2-6 based on the value in Column G into Sheets with the same name. For example, if a cell in column G states "BluePrint", I would like the entire row to be copied into the tab labeled "BluePrint".
however I have been unsuccessful in adapting the coding to my specific wording.
Based on the example and solutions from one of our friends post http://www.excelforum.com/excel-prog...ell-value.html.
i want to know the code with the same data as posted in THAT example,changing the data slightly like adding "TODAY" & "TOMMORROW" as other key words which will be Cut/Copied as seperate groups one beneath the other.
I had attached the worksheet with the actual data & the final Required format.
VB: Private Sub Worksheet_change(ByVal Target As Range) Dim KeyCells As Range Set KeyCells = Range("K:K") If Not Application.Intersect(KeyCells, Range(Target.Address)) Is Nothing Then If ActiveCell.Value = ActiveCell.Offset(0, -6).Value Then ActiveCell.Offset(0, 1).Value = ((ActiveCell.Offset(0, -4).Value) * (ActiveCell.Offset(0, -5).Value) End If End Sub
Now I would like to add another code: When I will change value in actual cell (sheet1) then copy value from cell A1 (sheet1) to the first free cell in column A (sheet2). I still have problem with error that I am out of range if I tried to copy it to sheet2.
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
I have a report that I use everyweek and split up into various sheets according to the criteria.
So if any cell in column C contains "Apple", then I want it copied into a new s/s (with the headers). I basically have to do a number of iterations on this, can someone assist please? The main problem I invisage is asking Excel to copy the row into the new sheet underneath the last one.
I have a range of data in Sheet1- if in column D the cell contains the word "Everyday" I need the entire row to be cut and pasted to Sheet2. Does anyone know of a way in which a macro could do this? I would need the entire row to be cut from Sheet1 and pasted into Sheet2.
I have attached a file showing what I would need the output to look like. I need to know how to search a range of cells (in this case column E) and if the day of the week is Wednesday to copy that entire row to the Worksheet titled Wednesday. I would do it manually but I have several thousand rows of data to get through, and there has to be a better way.
Is it possible to change and entire sheet to Upper case using the 'Upper' function?
We are need to change all the text to caps but can only seem to apply the function to one cell at a time and then copy it down for the column. This is going to be a fairly labour intensive process as we have many columns.
In Column D I already have a listbox on every line. If the user selects "waiting payment" then the whole row needs to be highlighted red. If the user selects "arrived" then the the whole row should be green. The dropdowns are already there, but I cant get the colors to change. I have heard that conditional formatting may allow me do do this, but I'm not sure how to go about doing it.
I'm Trying to change the value of a row when a determine condition happens, and I was thinking of doing it after the insert was made, but maybe it's easier before the insert (?) The thing is i've tried both, and i'm doing it wrong because it's not working
Code: With ThisWorkbook.Worksheets("Site Configuration List") .Range("A").EntireRow.Offset(1, 0).Insert ' Tried this .Range("A").EntireRow.Interior.Color = 49407
Obviously not at the same time, but no of those work. The call to the sub where the code above is implemented, is inside a loop, however, with each one of the things I've tried, when it gets to the line the program just stops. No error or anything.
I am looking to change to color of an entire row based on the value of a single column in that row....Say I have an issue on a line and the "priority column is set to high" I would like that entire row to turn red....
I have a spreadsheet with data in a1:p100 and i'm trying to find a macro that anytime the cell contents change in either column B or Column F it copies the entire row to another tab in the spreadsheet.
I am looking to change to color of an entire row based on the value of a single collumn in that row....Say I have an issue on a line and the "priority collumn is set to high" I would like that entire row to turn red....
with VBA on below mentioned data names in column A on that some names are repeated . That repeated names with amount & doc number should be cuted & and paste in the next sheet ie sheet2 help with VBA ....
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
I want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.
Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE Name Number KEY Date Name1 1 a,b,c 12/1/2011 Name2 2 x 12/1/2011 Name 3 5 one,three 12/1/2011
AFTER Name Number KEY Date Name1 1 a 12/1/2011 Name1 1 b 12/1/2011 Name1 1 c 12/1/2011 Name2 2 x 12/1/2011 Name 3 5 one 12/1/2011 Name 3 5 three 12/1/2011
This macro below is meant to search a sheet for a user selected value, select the entire row and copy it into a new sheet that has been created under the name of the user selected value. It will create said sheet, but isnt finding the value and/or copying the active cell row. Im not getting any errors so it has no issue with the coding itself, it just doesnt work, have i missed something obvious again?
Is there a way of copying an entire sheet, but pasting only the cells that don't contain an equation?
I have a number of populated templates that need to be copied into a master document, both formatted and laid out the same. However, I have some instances where the templates have been fiddled around with so the formulas have been corrupted. So, I'd like to pick up the raw data without the corrupted equations.