I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
I have in my 'Daily' sheet I9 which needs a formula to look at the date in C9 and the scan range 'Weeks' F6:AN41 and find the cell with the matching date and then whatever text is in Row 2 of the column the date was in will be returned.
View 2 Replies View RelatedOn sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;
I want to filter data using two sheets. i want only the names in a field that are listed on BOTH sheets. i have a two lists of names and i want only the names that are included in both sheets while still including the rest of their information.
View 4 Replies View RelatedI am trying to find a way of comparing entries in one spreadsheet to another spreadsheet and generating a third sheet of those that do not match.
As an example, I have a spreadsheet of approved supplyers, with name, reference and date in each column, and a speadsheet of used supplyers, some with references and some without. I want to compare the supplyers used to the approved supplyers list by reference number (which are in the same format), and produce a third sheet listing all those that do NOT match e.g. unapproved supplyers.
I need to make sure that the third spreadsheet only lists each seperate supplyer once, even though they may have been used several times, AND it must also include supplyers without a reference number.
I will use this to compare many spreadsheets with the same data, but of varying length and would like to use a macro to perform this function.
Does anybody have a code snippet to search and compare 2 sheets.
I want to read the value in a cell on the first sheet, then search the entire second sheet for a match, if it does match then copy the value from certain cells on the second sheet to the row on the first.
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
I'm not sure if this is best handled in the Formulas & Functions section or elsewhere, but this is my best guess. I have a spreadsheet used for tracking hardware issues with data in two worksheets:
1. PageCount
Column 1: Date
Column 2: Serial#
Column 3: PageCount
2. Tickets
Column 1: Date
Column 2: Serial#
Column 3: TicketNumber
What I'm trying to do is find a way to extract from those two sheets the date, serial number, page count, and ticket number where the date / serial # are the same and dump this to a new sheet. I've thought that I may need to concatenate the date / serial number together into a single cell or something, but I'm really at a loss as to how to pull this data. Part of me thinks this should be done in SQL, not a spreadsheet, but that's how our reports are produced.
I need macro to copy values from a Master worksheet on a daily basis, and paste them to multiple individual worksheets in cells adjacent to today's date (already crafted). For instance, a value of 8 is entered into a particular cell in the Master, it is copied and pasted into column E of another worksheet, on the row with today's date already written in column B. I need to do this repeatedly for over 50 worksheets.
View 2 Replies View RelatedI have excel from windows 8 and I am trying to copy the information on one cell on a sheet to multiple sheets. I tried the click on one tab hold shift and click on the last tab and type the information or press F2 or paste the information. Well, nothing works.
View 5 Replies View RelatedI am trying to copy an entire row to another tab based on when a cell changes. The column where the change will come from in colum N. I am using this code based on what I have read on this board, but cannot seem to get it to work correctly.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim LC As Integer, iCol As Integer, Found As Range
iCol = 14 'column containing K
LC = Cells.Find(what:="*", SearchDirection:=xlPrevious, SearchOrder:=xlByColumns).Column
If Target.Column = iCol Then
Select Case Target.Value
[code]....
In the end what I would like to do is everytime there is a change in column N, the macro copies the information from that row into the other tab. I would like the information to overwrite anything that is alraedy in that tab as well. So if someone accidentally putc in a C instead of a K, it will not keep that information in the wrong tab.
I have a set of sheets on a workbook that contain addresses, which are all combined on the first sheet (as you can see in the attached file). I would like to use a formula to compare the addresses on the Main sheet with the other sheets, then return in the D column of Main a colored cell indicating on which sheet the address was found on; different colors for different sheets. I tried to figure out some conditional formatting, but to no avail. Also, on occasion I have spreadsheets with 5 or 6 sheets containing these mixed addresses. Is there a solution that won't be limited to just a few sheets for comparison?
Excel Help.xlsx
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain()
Application.ScreenUpdating = False
Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range
findThis = "1"
[Code]....
I have this code on my sheet1:
VB:
Private Sub Worksheet_change(ByVal Target As Range) Dim KeyCells As Range
Set KeyCells = Range("K:K")
If Not Application.Intersect(KeyCells, Range(Target.Address)) Is Nothing Then
If ActiveCell.Value = ActiveCell.Offset(0, -6).Value Then
ActiveCell.Offset(0, 1).Value = ((ActiveCell.Offset(0, -4).Value) * (ActiveCell.Offset(0, -5).Value)
End If
End Sub
Now I would like to add another code: When I will change value in actual cell (sheet1) then copy value from cell A1 (sheet1) to the first free cell in column A (sheet2). I still have problem with error that I am out of range if I tried to copy it to sheet2.
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".
Now I want to copy the row containing "total" from all the sheets into another sheet called "report".
I'm trying to eliminate any .select or .activate from my code to speed things up and reduce screen flicker. At the moment, I have a sheet created at the click of a button. Basically for every date exclusive of weekends, there are 4 entries, for each date there are the following entries AM Metro, PM Metro, AM Regional, PM Regional. The user wants to be able to change the date range in the "overview" sheet and when there is data already in the other columns for these matching rows, have the input sheet update with old (copied??) info, if no previous data then add all 4 rows and sort... if previous date not in date range then delete entire row.
View 4 Replies View RelatedI have two sheet one is copy sheet and other is past sheet. In Paste sheet Header Title is fixed values , copy sheet header title also same but its not proper aligned & few header title not available. I want to transfer entire data from copy sheet to past sheet matching with header title. No need to change paste sheet Header title & alignment order.
Attached File: Data Transfer.xlsx
I have a userform in a workbook and depending on what selection the user makes from a combo box, I want the data to get pushed into the relevant sheet.
I did think I could get away with
If Me.cmbtype.Value = "Tool" Then
Set ws = Worksheets("Tools")
ElseIf Me.cmbtype.Value = "Guide" Then
Set ws = Worksheets("Guides")
etc but its now not copying data into Tools if I selected Tool from cmbtype (but when I select Guide it does appear to work).
The rest of the code is the same regardless of what type they select from cmbtype, its just which sheet the data gets copied into that changes.
creating a VBA that will scan my entire sheet and any cell with a date before todays date, the entire row will be copied and pasted to another sheet. and it should search every cell in sheet 1 and paste all rows with dates in the past. if there is more then one cell in a row with the date in the past, that row will copied only once.
View 14 Replies View RelatedI have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I need to track only certain tasks id's out of entire task id database. I have 1 column of data on sheet "A" that represents task id's I want to track. On sheet "B" I have multiple columns of data, the first column being the task id's. I need to compare the column on sheet A with the first column on sheet B. If there is a matching task id, I need to copy the entire row of data from sheet "B" on to a new sheet "C". If there is no matching task id on sheet "B", I would like to copy just the task id. Each week I would get a new set of data for sheet "B" (which can vary in length) and I need the ability add or subtract task id's on sheet "A" that need tracking. See the attached xls file for a piece of sample data.
View 4 Replies View RelatedI have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
If cell A1 is the same thing at cell B15 then I would like cell A1 to turn RED. Is there a way to do this?
View 5 Replies View Relatedi'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
There are two sheets: Sheet1 and Sheet2
Columns in Sheet 1 are the following:
company PERMNO number, dates, market capitalization (no data in this one)
Columns in Sheet 2 are the following:
company PERMNO number, ticker, dates, market capitalization
In Sheet2, there is a whole range of dates (between 1990 and 2004) for every single company, whereas in Sheet2 there is one or 3-4 dates for a every single company.
I would like to match the exact date/dates in Sheet1 in the range of dates in Sheet2 and then if they match, copy the corresponding cell value from the market capitalization column in Sheet2 to the empty market capitalization column in Sheet1. I also want that the company PERNO numbers match.
In short: if PERMNO numbers match, match the date/dates in Sheet1 within the range of dates for the same company in Sheet 2 and copy the market capitalization value to Sheet1.
Example:
Sheet1:
A B C
1. PERMNO DATES MARKETCAP
2. 13123 199803
3. 13123 199904
4. 65456 200005
5. 44550 200104
6. 44550 200211......
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
compare data from different worksheets
For clarity, I have placed the sample datasets at the following URL
[url]
Given: the datasets for sheet1 and 2 might not contain the same number of rows.
I am looking for new rows (it might be inserted in any position of the rows) in sheet1. The new rows will be highlighted in red color. For example:
[url]
Via conditional formatting, I am searching to change the color of a specific word in a cell (not the color of everything in the cell, but only that specific word - and the word repeats in the cell). A function such as =isnumber(search("NOK";A1)) colors all the cell values, which I do not want to do. How i can perform this task?
View 1 Replies View Related