I am trying to copy and past different columns from different sheets and copy them in one sheet which I named "BI Output Data".
VB:
'This copy and past the BI Result'
If CheckBox1.Value = True And CheckBox7.Value = True Then
With Sheets("AFA Output Data")
[Code]....
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies View RelatedI need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
Sub MinerInfo()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
resultsRow = 2
[Code]...
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedHow to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View Relatedi want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies View RelatedI have set up a workbook with sheets named for each month.
I have 70+ separate excel files (one for each month) that each have a single sheet I want to copy into the new workbook's corresponding month sheet.
Each file is named different but the name of the sheet in those files that I need will all be the same.
Is there a way I could sit in the sheet I want it pasted to, run a macro that I can point to the correct file/workbook -- preferably without opening -- and then have it copy the contents of the sheet I want (again, will always have the same sheet name).
I want the sheet copied with formatting and all, an exact copy.
This link seemed useful - if i could control which sheet it copies more easily since for me the source data always has a different file name. [URL] ........
I thought I lost that original message so I rewrote everything - differently - then I saw the restore button so I'm leaving both phrasings.
I would like to know if there is a Macro that could ask me which workbook to copy from, select the sheet in that workbook called CAP (sheet will always have the same name but I need to copy the sheet from 70 different files/workbooks) copy the whole sheet with formatting and all, and then paste it in my active sheet on the new workbook I am in.
I want to take data about a particular partner we have (CAP) out of the monthly summaries for the last ~72 months (which each have their own file/workbook) and put them all in one workbook just for this partner, on each sheet by month still.
I am only interested in automating everything I have to do for 1 month, but in a way that would easily let me do it again for the next month, and the next and the next, 70 times.
But a Macro would still be easier than opening each file, going to the sheet I want, copying everything, going back to my new workbook, pasting everything, closing the extra workbook, then doing that ALL again 70 times.
I have one master sheet that I update daily from several other spreadsheets.Right now I'm having to manually place the columns side by side and copy the new data over. The column and row format are exactly the same for each of these spreadsheets. Each day we go out and collect data, just numbers. I then must copy the numbers to the master sheet. I cant just copy and paste the columns because in the rows that don't have data in them it will overwrite the previous days information with blanks. I've attached a sample with some dummy data in it. I only update data in columns G and H.
View 5 Replies View Relatedwhat i want in my code here is, i have 3 tabs in my attached workbook(product db, product export, invalid product).
In product db tab if Export column contain Y then that required info should paste in "product export" tab and only this columns(A,B,C,E,F,G,H,I,K) should paste
In product db tab if export column contain N then that required info should paste in "invalid product" tab and only this columns(A,B,C,E,F,G,H,I,K) should paste
to get this output i prepared code but it seems in longer way and make shorter to this code.
i make a separate lines for each column to copy and paste.
[URL]
Is there a way to copy from one sheet to another but to different columns? For example, I want to copy the information from Sheet1 to Sheet2, starting at row 17 and leaving column C blank and pasting the information from Sheet1 column C to Sheet2 Column D?
I thought I could use something like this or with a combination using Unbound but couldn't get it to work.
Code:
Worksheets("sheet1").UsedRange.Copy Destination:=Worksheets("sheet2").Cells(Rows.Count, 1).End(xlUp)(17,
But how do you drop the info to the correct columns?
Sheet1ABC1EmployeeStartEnd2Bill3/8/20143/11/20143Bill6/5/20146/8/20144Dave10/2/201410/5/20145Debra6/7/20146/10/20146Michael1/2/20141/5/20147Rachael9/15/20149/18/20148Rick9/12/20149/15/2014Excel 2010
Sheet2ABCD16EmployeeStartEnd17Bill3/8/20143/11/201418Bill6/5/20146/8/201419Dave10/2/201410/5/201420Debra6/7/20146/10/201421Michael1/2/20141/5/201422Rachael9/15/20149/18/201423Rick9/12/20149/15/2014Excel 2010
I want to copy a column of values and blanks and past the values into another column without the blanks.
View 9 Replies View RelatedI am having a problem with hidden columns when creating a new sheet via VBA.
The source sheet has (4) columns that are hidden when this data is pasted to the destination sheet it ignores the four columns.
I need the destination sheet to be identical to the source sheet with the hidden columns.
As you can see in the code I have been able to hide the columns however the data is now in the wrong columns because the copied data excluded these columns. I tried hiding the columns before and after the paste with no success I'm thinking the issue lies in the actual copy portion of this task.
Code:
Sub E_MAIL()
'
' E_MAIL Macro
'
' Multiple_emails_and_Sheets Macro
'This is used for one sheet with multiple e-mails.
' ThisWorkbook.Sheets("NO").Copy
[Code] ........
I have Data in Row 1 beginning in Cell E1 then K1 (Every 6th Cell) About 300 Records with 5 Blanks between each one of them...
How would I get that Data In A5 Down Without the Blanks?
I'm trying to copy and paste range in alternate columns from one worksheet to another. I can record this macro, but I believe it'll be really long because I have 21 alternate columns to copy and paste. What I'm trying to do:
-copy range B9:B41 in workbook 'Channel OU template' then paste values only in range BI9:BI41 in workbook 'final'
-copy range D9:D41 to range BK9:BK41
-F9:F41 to BM9:BM41
..and so on until the last column AP9:AP41 to CW9:CW41
Basically it's just simple copying and pasting from alternate columns. This is the really basic code that I have just for one column:
Sub copy()
Windows("Channel OU template").Activate
Sheets("sheet1").Select
Range("b9:b41").copy
Windows("final").Activate
Sheets("ou").Select
Range("bi9").PasteSpecial xlPasteValues
End Sub
I am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
View 3 Replies View RelatedIs there a vba codes to copy all data from sheet 1 to 5 in workbook to sheet 6 same workbook? and paste it as value.
View 5 Replies View RelatedI have spent ages creating a work diary and have protected the sheets using VBA however on finishing the sheet one important thing that needs to happen is the ability to copy and paste information from the boxes to another worksheet. i.e MONDAY - SUNDAY
View 1 Replies View RelatedMacro Button to copy and paste from different sheets, I need to Copy SKU which is in Sheet 1 Column B and Find in Sheet 2 then Copy the UPC on Sheet 2 and Paste to Corresponding SKU in Sheet 1 Under Column C. If an SKU doesnt show on Sheet 2, it should leave Sheet 1 Column C blank and go on with others.
View 3 Replies View Related
