Macro To Copy Selected Columns And Paste In New Sheet
Aug 24, 2012
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
View 1 Replies
ADVERTISEMENT
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
Mar 31, 2014
I use few cells with formula and I would need when I click on the cell to run a macro that would copy the selected cell and do a paste value.
View 2 Replies
View Related
Feb 12, 2014
write a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
Here an example:
A
B
C
[Code]....
View 1 Replies
View Related
Aug 24, 2009
OK, I want to run a macro that will:
(1) go in to sheets 'A', 'B' and 'C'
(2) find all cells in row 1 that equal "1"
(3) copy the entire column and paste as values
View 13 Replies
View Related
Dec 30, 2008
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jul 7, 2012
I am trying to copy and past different columns from different sheets and copy them in one sheet which I named "BI Output Data".
VB:
'This copy and past the BI Result'
If CheckBox1.Value = True And CheckBox7.Value = True Then
With Sheets("AFA Output Data")
[Code]....
View 2 Replies
View Related
Jul 23, 2013
I need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
Sub MinerInfo()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
resultsRow = 2
[Code]...
View 4 Replies
View Related
Sep 27, 2009
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
View 14 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Jul 29, 2014
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
View 3 Replies
View Related
May 1, 2013
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
View 1 Replies
View Related
Jun 11, 2014
I am running a auto filter macro to I need to change it to only copy column A:B and past in column C:D in the sheet called "Diary". How to change my current macro to only select column A:B and paste it. It is currently pasting the entire row.
Here is the part of my code:
[Code] .....
View 1 Replies
View Related
Nov 29, 2011
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
View 3 Replies
View Related
Jun 4, 2009
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
View 14 Replies
View Related
Sep 23, 2008
I have 4 sheets called Data, xxx, www and yyy. The sheet names xxx, www and yyy are also words that are existing in the sheet Data in Row C. Am I able to copy paste all the lines existing in the sheet Data including i.e. xxx in Row C into the sheet xxx? This should also work for the words www and yyy.
View 9 Replies
View Related
Jul 7, 2009
Copy paste macro that I'm using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.
View 9 Replies
View Related
Jul 7, 2009
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
View 9 Replies
View Related
Nov 21, 2011
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
CurrencyDateRef CodeIDAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD-111,131.450Distr Payable 07152011USD07152011XDVU4315420.4240.C5001.USD18,606,772.190Distr Payable 07152011USD07152011XDVU4315420.4240.C5002.USD111,131.450Distr Payable 07152011
I get the data in the below format
CurrencyDateRef CodeIDAccountAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD420.4240.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD420.4240.C5002.USD-111,131.450Distr Payable 07152011
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test()
Dim idRange As Range, c As Range
Dim uniqueID As String
Dim destSht As Worksheet, sourceSheet As Worksheet
Dim r As Long
Dim i As Integer
Dim map As Object, key, item
[code]....
View 2 Replies
View Related
Aug 18, 2014
Any way to bypass the unprotect sheet in a shared work book, this is what i came up with so far
[Code] .....
View 4 Replies
View Related
Jan 28, 2014
I have a set of data on sheet1 indicating test scores and basic information. At the top of the data, I have some drop-down menus that allow me to select certain minimal score results. I used conditional formatting to highlight the rows of individuals that meet the selected criteria from the top of the screen. You will notice in the screenshot, that I placed a button at the top called "Go!". Ultimately, I'd like for when I push the "Go!" button, Excel will copy the highlighted cells and paste them into sheet2 (beginning on row 2 as I have a title bar in row 1).
ExcelSnippet.JPG
View 5 Replies
View Related
Mar 12, 2014
I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
Sample.xlsx‎
View 3 Replies
View Related
Nov 14, 2012
Sheet 2 has 3 cells with values:
C14, C15, C16
I need VB code to:
copy the values in those cells
Return to Sheet 1, let the user click a cell in any row in Colum F, then Paste them (Special, Values and Transpose)
View 4 Replies
View Related
Apr 1, 2008
how to unprotect the sheets in order to be able copying datas to to certain cells.
The unprotection works but only when I start the macro the second time. I do not understand why.
After I did the updates I want to reprotect the sheets but that seems not to work in my case.
ActiveSheet.Unprotect Password:="my_password_here"
'unprotect the sheet
ActiveSheet.Protect DrawingObjects:=True, _
Contents:=True, Scenarios:=True, Password:="my_password_here"
' Reprotect the Sheet
View 7 Replies
View Related
May 8, 2014
I'm never done a macro before and of course I'm very new to excel. I have a worksheet for lessons learned that have multiple sheets for each state. I want to create a macro that every time I enter a new data into a row and hit "Add to summary sheet" and it copy and paste the the next available row in summary sheet.
See the attached file for my workbook : Book1.xlsx‎
View 9 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
View 3 Replies
View Related
Apr 26, 2013
I would Need a macro which would Search a Keyword in the excel sheet and copies and pates the data in Cell "A2". for Example "Market" and then after the search it copies 12 rows upwards and 10 columns from the Cell that the word "Market" is placed. And then it copies 12 rows downwards and 10 columns from the Cell that the word "Market" is placed.
I have tried recording the same but it does not work if the Word "Market" is placed in different cell value.
View 2 Replies
View Related
Mar 24, 2014
in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.
Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.
View 4 Replies
View Related
Nov 23, 2009
I have a macro code which gets the file list from a folder i specify and puts it in to an excel sheet as a column. I have then made a drop down list from this so the user can select the file they want.
From this file i wish to copy the data on a sheet that i specify. For example the sheet "dump" from file FR7_19.11.2009.xls (which will be a closed workbook) and paste its content in to the sheet "dump" in Summary.xls
I have a macro which opens up the closed workbook FR7_19.11.2009.xls and copies the sheet "dump" and then creates a new sheet of the same name and content in my current workbook (Summary.xls). However when i wish to select a different file to load in to Summary.xls "dump" the formulas i have been calculating information from this sheet all come up with #!Ref errors. I know this is because the macro i use deletes the old dump sheet before re adding a new one containing new data.
I am therefore looking for a macro which will simply just copy and paste the data from any file i select in to a sheet named "dump" as the data is always set out the same in every file but the values are different. I assume this will then mean that any formulas i use relating to this "dump" sheet in Summary.xls will work because the sheet is no longer being deleted and re-added the data within it has just simply been copied over.
View 2 Replies
View Related
