Copy And Paste Hidden Columns
Dec 14, 2011
I am having a problem with hidden columns when creating a new sheet via VBA.
The source sheet has (4) columns that are hidden when this data is pasted to the destination sheet it ignores the four columns.
I need the destination sheet to be identical to the source sheet with the hidden columns.
As you can see in the code I have been able to hide the columns however the data is now in the wrong columns because the copied data excluded these columns. I tried hiding the columns before and after the paste with no success I'm thinking the issue lies in the actual copy portion of this task.
Code:
Sub E_MAIL()
'
' E_MAIL Macro
'
' Multiple_emails_and_Sheets Macro
'This is used for one sheet with multiple e-mails.
' ThisWorkbook.Sheets("NO").Copy
[Code] ........
View 3 Replies
ADVERTISEMENT
Aug 17, 2007
Sheet1 has info in column a, b, c, d, e.
I want to paste these value into sheet2 but sheet2 has columns b, d hidden.
The paste end up putting the values in the hidden columns.
Is there a way of pasting a speacial so that the hidden columns are missed and i get the paste to go into colums a, c, e, f, g WITHOUT code?
View 5 Replies
View Related
Jun 29, 2009
I'm trying to get my code to work by trying to copy from a visible tab into a hidden tab. Currently I have it able to function when the tabs are hidden, and i've been trying to get it to work.
My code is below. I have a variable section because there are different sheets that will be hidden, and this is a way that i found works to get the variable tabs selected.
View 5 Replies
View Related
Jul 26, 2009
I'm trying to copy a range with hidden rows,
but if i do like this:
range("A1:A10").copy Destination:=Range("A15")
but, as i said, some rows are hidden and i want copy them too.
Unfortunately Excel copy only visible...
How can i copy an paste hidden cells too?
View 9 Replies
View Related
Aug 5, 2014
I have searched all over and read many solutions for selecting only visible cells and copy pasting them or formatting them by doing Ctrl + G and selecting visible cells only. However the problem is once I select visible cells only, it seems that every time I do Ctrl + C on filtered Range it only selects visible cells. I want a way to toggle this setting in Excel. I'm using Office 2007. For example: if I want to select the entire range, both hidden and visible cells within the selected table array, is there anyway to reverse or toggle the setting that causes Excel to refresh the "visible cells only" setting back to default or all cells?
It would be a much faster way than to remove all filters, select & copy entire range, and then re-apply all filters again.
View 5 Replies
View Related
Mar 26, 2014
I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
View 1 Replies
View Related
Jul 15, 2005
when I want to send by email I find I cannot copy these smaller sheets - every attempt at a copy will also copy the hidden columns.
How to copy a spreadsheet and NOT pick up the hidden columns?
I realise this might be nearly impossible or considered useless because no hidden columns would mean either making the copy with blank hidden columns or altering all formulas to suit a sheet which now does not have all the original columns.
View 2 Replies
View Related
Dec 30, 2008
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies
View Related
Jul 19, 2009
I have one master sheet that I update daily from several other spreadsheets.Right now I'm having to manually place the columns side by side and copy the new data over. The column and row format are exactly the same for each of these spreadsheets. Each day we go out and collect data, just numbers. I then must copy the numbers to the master sheet. I cant just copy and paste the columns because in the rows that don't have data in them it will overwrite the previous days information with blanks. I've attached a sample with some dummy data in it. I only update data in columns G and H.
View 5 Replies
View Related
Dec 29, 2012
what i want in my code here is, i have 3 tabs in my attached workbook(product db, product export, invalid product).
In product db tab if Export column contain Y then that required info should paste in "product export" tab and only this columns(A,B,C,E,F,G,H,I,K) should paste
In product db tab if export column contain N then that required info should paste in "invalid product" tab and only this columns(A,B,C,E,F,G,H,I,K) should paste
to get this output i prepared code but it seems in longer way and make shorter to this code.
i make a separate lines for each column to copy and paste.
[URL]
View 4 Replies
View Related
Jun 5, 2014
Is there a way to copy from one sheet to another but to different columns? For example, I want to copy the information from Sheet1 to Sheet2, starting at row 17 and leaving column C blank and pasting the information from Sheet1 column C to Sheet2 Column D?
I thought I could use something like this or with a combination using Unbound but couldn't get it to work.
Code:
Worksheets("sheet1").UsedRange.Copy Destination:=Worksheets("sheet2").Cells(Rows.Count, 1).End(xlUp)(17,
But how do you drop the info to the correct columns?
Sheet1ABC1EmployeeStartEnd2Bill3/8/20143/11/20143Bill6/5/20146/8/20144Dave10/2/201410/5/20145Debra6/7/20146/10/20146Michael1/2/20141/5/20147Rachael9/15/20149/18/20148Rick9/12/20149/15/2014Excel 2010
Sheet2ABCD16EmployeeStartEnd17Bill3/8/20143/11/201418Bill6/5/20146/8/201419Dave10/2/201410/5/201420Debra6/7/20146/10/201421Michael1/2/20141/5/201422Rachael9/15/20149/18/201423Rick9/12/20149/15/2014Excel 2010
View 8 Replies
View Related
Oct 8, 2008
I want to copy a column of values and blanks and past the values into another column without the blanks.
View 9 Replies
View Related
Jul 7, 2012
I am trying to copy and past different columns from different sheets and copy them in one sheet which I named "BI Output Data".
VB:
'This copy and past the BI Result'
If CheckBox1.Value = True And CheckBox7.Value = True Then
With Sheets("AFA Output Data")
[Code]....
View 2 Replies
View Related
Apr 30, 2013
I have Data in Row 1 beginning in Cell E1 then K1 (Every 6th Cell) About 300 Records with 5 Blanks between each one of them...
How would I get that Data In A5 Down Without the Blanks?
View 9 Replies
View Related
Jun 23, 2006
I'm trying to copy and paste range in alternate columns from one worksheet to another. I can record this macro, but I believe it'll be really long because I have 21 alternate columns to copy and paste. What I'm trying to do:
-copy range B9:B41 in workbook 'Channel OU template' then paste values only in range BI9:BI41 in workbook 'final'
-copy range D9:D41 to range BK9:BK41
-F9:F41 to BM9:BM41
..and so on until the last column AP9:AP41 to CW9:CW41
Basically it's just simple copying and pasting from alternate columns. This is the really basic code that I have just for one column:
Sub copy()
Windows("Channel OU template").Activate
Sheets("sheet1").Select
Range("b9:b41").copy
Windows("final").Activate
Sheets("ou").Select
Range("bi9").PasteSpecial xlPasteValues
End Sub
View 8 Replies
View Related
Jun 17, 2008
I am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
View 3 Replies
View Related
Jun 11, 2014
I want to copy 4 columns and one cell to different sheet. I have 'Main' sheet and 'Report' , 'Report(1), 'Report(2), 'Report(3)' and so on. In this 'Report', I'd like to copy column A,E,F, and J and paste to column B, C, D, and E in the 'Main' sheet. I also copy Cell C3 in 'Report' sheet and paste in column A. The cell C3 is ID.
[Code] .....
I need to check every 'Report' sheet for copying and put these records into 'Main' sheet.
The first row in 'Report' is 6
The first row in Main is 4
View 4 Replies
View Related
Mar 24, 2014
getting a vba formula to copy values from two columns and paste it in 3rd column on the click of a button.
For example:
if I have 3 rows filled in column A and 5 rows filled in column B then i need a formula to copy 3 rows in A and 5 rows in B and paste it to column C. so column C will have 8 rows now.
The number of rows the value can be entered can vary. [ example: sometimes we may have 6 rows filled in A 2 rows in B ]
View 9 Replies
View Related
Jan 10, 2009
How can I copy a column (C6:C200) and paste it according to a cell value . If I have in a cell 5 it will paste column (C6:C200) five times .
View 7 Replies
View Related
Mar 31, 2009
I am trying to copy three columns of information from sheet1 into sheet2.
When pasted I need the information to be spaced or offset as per below sample.
Sheet1
HTML ABCDEF
1#AnimalDescription
21Dogfour legged fur ball
32Catother four legged
43Horsegsdfgdfgdbfb
54Snakedfgegergeg
65Ratlkjlmlbnm,
76Birdtshgjmgjkk
Sheet2
HTML ABCDEF
1#AnimalDescription
21
3Dog
4four legged fur ball
52
6Cat
7other four legged ...................
View 6 Replies
View Related
Jul 23, 2013
I need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
Sub MinerInfo()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
resultsRow = 2
[Code]...
View 4 Replies
View Related
Apr 20, 2007
I need to copy certain columns from one sheet to another sheet based on a formlua on the date.
So, on 'Master Sheet' I have a column called 'Date'.
I would like a formula, or macro, which does the following.
If date (column D) is over 2 weeks old (today's date - 14 days) then copy columns A, D, S and T to another work sheet called 'Not Attended' and paste them into columns A,B,C, and D.
View 9 Replies
View Related
Apr 18, 2014
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
View 3 Replies
View Related
Jul 10, 2014
I have some data from many csv files.
I would like to record/create a macros to open the file and paste 4 columns worth of data into another spreadsheet. Making sure the data is pasted in the correct column and doesn't overight data already in a tracker. Ie. paste it into the next available space.
Output.csv
View 9 Replies
View Related
Sep 27, 2009
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
View 14 Replies
View Related
Sep 23, 2011
I'm trying to figure out how to copy & paste the following conditional formatting down the column.
The conditional formatting I'm using is in cell A1, D1, G1, J1, M1 (so I have to Ctrl click each cell manually & I then choose to "format the values that rank in the:" "bottom 1" & format it green.
I want to copy and paste that all the way down column A, D, G, J, & M and have the conditial formatting pick for each row, not the whole column. eg. A2, D2, G2, J2, M2... A3, D3, G3, J3, M3...
View 7 Replies
View Related
Aug 24, 2012
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
View 1 Replies
View Related
Jan 3, 2013
Is there any way to copy a column that has a specific range
=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc
to copy that to a column lets say 5 columns to the right without my range changing?
=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")
I need the same range in all columns, and I cant seem to accomplish this.
View 3 Replies
View Related
May 1, 2013
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
View 1 Replies
View Related
Jun 2, 2009
I'm alittle new to excel and MrExcel website. I have a spreadsheet that im trying to get a formula to work as below. If anyone knows how to get this to work please help! Thank you.
My spreasheet has the following:
Sheet1:
Column B Column G
1 test 1
2 center 2
3 school 4
Sheet2:
Column B Column G
1 work blank
2 school blank
3 home blank
I'm trying to find the value from sheet2 cell B2 (school) in sheet1 column B and then when it finds that, I need it to copy the data from the Corresponding sheet1 Column G cell to sheet2 Column G cell.
View 9 Replies
View Related
