I have attached xl sheet for ref.
I have value in E2(5),F2(10)=G2(5[sub of F2-E2])
I need to find E2(5) value in B2:B21 and the same of F2 also
After finding that
(eg): E2 value 5 present in B6 cell and it should come to c6 cell same of F2 also
Now It should select C6 to C11 cells.(ref of B6 to B11,ie,5 to 10)
I tried in vba and formuals but i couldnt find solution.
i have a chart on a worksheet, it contains multiple series (3) in which i wish to change the values/ range of each series of the chart through vba. Thus far i have struggled due to the lack of intellisense, in which i tried
Worksheets(1).ChartObjects(2).Chart.Series("Fails").Values = Range("b12:b14")
with "Fails" being the name of that particular series.
I understand that you can do dynamic named ranges for graphs, using one named range for each series and another for the categories. However, the graph I'm working on will have a lot of series'. Is there a way to do this cleverly? I'm trying to avoid making a named range for each one.
View 2 Replies View RelatedUsing the Dynamic Named Range tip, I defined named variables as follows:
Xrange=OFFSET($A$2,0,0,COUNT($A:$A),1)
Yrange=OFFSET($B$2,0,0,COUNT($B:$B),1)
then tried to define my Chart series as follows:
=SERIES($B$1,Xrange,Yrange,1)
but it gives an invalid reference error. What am I doing wrong?
I am trying to create an XY scatter plot with multiple series. Normally, one has to manually type in or mouse-drag a range for each x series and y series. Instead I would like to build these two ranges (x and y) with text functions and place them in a cell.
For example:
A1: 'data'!$C$3:$C$10
B1: 'data'!$D$3:$D$10
Then, when I create a chart, instead of mouse-dragging, for the x-series, I'll indicate the range that's specified within Cell A1, and for the y series, that which is in B1. I would then repeat this for each series. The reason I want to do this is because I have dozens of series and dozens of graphs and it is relatively easy to programatically identify the range boundaries, but long and tedious to mouse drag them.
I have data which is imported from a txt file and always starts at the same row (R19) but is variable in length (end of data R??). I want to be able to select the chart xvalues (R19C10:R?C10) and values (R19C4:R?C4) based on the number of cells with data in them for a given column. In addition I believe I'm having troubles with sheet references, when the txt file is opened the sheet name is set to the file name, since I want to use this macro on many different files I need the sheet referencing code to account for this. Anyway here is the section of code which seems to be giving me trouble (the initial sections just create a new column of data which needs to be referenced as the xvalues) ...
View 3 Replies View RelatedTrying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedI need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
Currently I'm working in an excel file that contains a lot of charts. I want to write a macro that changes the source data of every serie in every chart. It only needs to add extra rows. But as every series has different columns where they get the data from, how can I change the rows without changing the columns?
This is what I've written so far:
Code:
Sub ammend_datarange_series_all_charts()
Dim start_cell As String, end_cell As String
Dim chart_tot As Integer, c As Integer, s As Integer
[Code]....
As you can see I've tried two things, first I tried to change the string of the source data, however this meant that every series would have C and E as their source data. So I wanted to retrieve the x and y values in string format. This does not work yet, it returns an array with the values of all the entries in the series source data. From that array I can not retrieve the column where the data came from.
I am attempting to use a dynamic named range in a chart data series as described in Excel Hacks (Hack #42 and Hack #52).
Using Insert|Name|Define I have created a named range called CashFlowSaleChartDataRange that is set to the following value:
=OFFSET('Cash Flow-Sale'!$O$10,0,0,NumFlows,1)
When I subsequently assign a reference to this named range in the data series dialog it will accept the answer and my chart will adjust to reflect the updated range. However, if I return to the data series dialog, I now see the range address returned by the OFFSET function rather than the named range reference.
I am trying to assign a named range to a series on a preexisting chart in a sheet, but I get the error that "unable to set values property of series class". This is the code example that DOESN'T work:
Sub assign_values()
Dim myrange As range
Set myrange = range("a1")
Set myrange = union(range("a5"),myrange)
activechart.seriescollection(1).values = myrange
End Sub
However, this code DOES work:
Sub assign_values()
activechart.seriescollection(1).values = range("a1")
End Sub
I don't see why the first wouldn't work, but the second would work. I suspect it is something to do with the union function. i am trying to go through a set of data and then group certain cells into a named range to be used on the graph.
I need to plot multiple series in a scatterplot. The problem is that the number of series is user-defined. And also, the number of data poitns in each series is different. I've looked it up already, but a lot of the examples i've seen don't account for the fact that I need to run through a loop and add series into my graph.
In other words, i need a way to select a certain range each time it runs through the loop, and add the data as a series into the chart. Also, the user enters how many series there are, so I use that as a counter
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies View RelatedI have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
I'm developing a loan processing system for members of a club. When an applicant asks for a loan, the club will calculate 10 % of that interest and the applicant will have to pay it back in 5 successive fortnightly instalments. If he asks for a loan in the first fortnight (1), for example, he will have to start paying instalments in fortnights 2,3,4,5,6 to pay it all back.
The system currently has 4 worksheets. The first sheet is a the loan application form. The cells outlined in thicker border, are the cells in which details must be input. Once it is input, the data will be automatically placed in the Processing worksheet using IF and VLookup functions (See spreadsheet attached), which is used as a basis for the loan schedule Worksheet. What I need is a macro that will copy the range filled in the Processing worksheet, and copy it to the exact same location in the Loan schedule worksheet (The cells with the same fortnight columns and the same member name. This is how the loans are to be filed.
I have a set of data listed by country, I need to add a new country to the list and I want to keep everything in alphabetical order. My problem is that adding a new series to the range anywhere but the end throws of the series formatting for my chart. The plotted points on my chart are the countries flag, so when everything shifts down a row the flags no longer represent the proper country. Is there an easy way to add the new country and keep my formatting lined up or will I need to redo the formatting for all the alphabetically lower countries?
View 5 Replies View RelatedWhat I want to achieve is a script that would create a new scatter plot of multiple series from a selected block of cell. I found a thread that was similar but what is different from my data is that my x values are different for each series.
The format of the data is in the following format, the first series will the first x,y pair, the 2nd series would be the second x,y pair. I don't know if it'll be an issue but one thing is that the date might be different lengths. For instance, the 3rd series, only has 4 data points, whereas the other series contains 6 data points?
x0.200.400.600.801.001.20
y5.002.501.671.251.000.83
x0.100.200.300.500.701.30
y5.002.501.671.000.710.38
x0.100.300.400.50
y6.672.221.671.33
So essentially, is there a way I can have the script say, select your range, and then graph the selected range as a scatter plot?
I'm creating a Macro to paste a series of formulas from a template in hidden rows above to cells further down in the same worksheet. My code works fine if I set an absolute range as the Destination - here's a portion of it:
Sub TimelineRow150()
Dim TimelineMatch As Integer, ProjectPlan As Object
TimelineMatch = ActiveCell.Offset(0, -1).Value
If TimelineMatch = 26 Then
Range("E26:AQ28").Select
[Code]....
I'd like to be able to copy and paste this code to run it multiple times in the same worksheet, (the TimelineMatch variable actually has 26 different options). Is there a way to replace the [Range("E150:AQ152").Select] portion of the code with a range that is relative to the Active Cell? (I'd instruct users that cell E be the Active cell before running the Macro, and E to AQ is still the range I need the copied data to appear.) I've tried using ActiveCell.Offset, but I keep getting an error of Method 'Range of Object' _Global' failed.
I have a small problem using the ‘sumproduct function’ which I am using it to calculate the area under curves using the following equation (=SUMPRODUCT((B10:B109-B9:B108)*(D10:D109+D9:D108))*0.5). However I have hundreds of curves to calculate the area under and the length of the data series for each curve is different, I am currently changing the length of the data series by hand. I have attached an example worksheet of 2 sets of data (the formula I am using at the moment is highlighted in blue – row 203). Is there are function or formula that I can use inside this equation to change the range of the formula depending on the length of the data series?
View 2 Replies View RelatedBook1.xlsx
I have two sheets of data and two tables (1=finial 2=data comparison) I am trying to figure out some kind of formula or vba that can easily tell me that the location point in table one data comparison matches the location in table two. The VPMDFS (location footage) in table two or NDE data can be a range, say vpmdfs.NDE + or - 3 ft. so the ILI or source record should fall in between this range. Once the match has been made I need to copy and paste that record onto sheet one all in the same row. I have been scratching my head and researching for weeks and cannot come up with a simple solution. My problem with all the scenarios that I've tried is the formulas what the data in the data comparison sheet to already be in the same row. Please reference my attached work book for examples.
I want to be able to find all the 0 differences (i.e debit = credit) cut that group out of that sheet and paste it to a new sheet in the same workbook. I have the code to find the 0 difference but I don't know how to select the range that makes up that difference and cut and paste it to a new page.
View 2 Replies View RelatedI name a range "MyList".
In another cell, I use Data.Validation.List and use "MyList" as the source.
Now I find another range named "HisList". Is there some way to determine if "HisList" is being used as a source for some other validation somewhere in the workbook?
"Trace Dependents" doesn't work.
If i have a range, lets name it "Names" and i want to find if the name
George is in that range, what formula should I use?
The data I need is in the middle of the worksheet (A16:B41), is there way to define the range so that excel only looks at that range and finds the last row of data?
Code:
Worksheets(i).Activate
lastRow = ActiveSheet.Columns("A").Find("*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows, LookIn:=xlValues).row
Range("A16:B16" & lastRow).Select
Selection.Copy
Sheets("difference Check").Activate
[code]....
Is there a property to, given a certain range, return the name of the range?
I have used the name property and gotten a name in the form worksheet!address, but I am trying to return the name that I have given the range.
I was planning on using:
'returns the name if it exists, else returns ""
Function findName(myRange As Range) As String
Dim name As name
For Each name In ActiveWorkbook.names
If name = myRange.Address Then
findName = name.NameLocal
Exit Function
End If
Next
findName = ""
End Function
However, this code isn't working because when comparing name to myRange.Address, name includes the worksheet that the range is on, but myRange.Address doesn't.
Even if I get the above code to work, it will take quite a while because I have many names in my worksheet, and would be running the findNames function many times
im currently using a Code that copies a visible range from one workbook and pastes that Range to another workbook. I dont like it though because every time it pastes the screen jumps.
I tried setting Range 1 = Range 2, its not giving me an error but its not "pasting" the information to the 2nd workbook.
I know ive done it before by doing each cell in each row individually but a its a big Data Table and that would take too long.
