i have a chart on a worksheet, it contains multiple series (3) in which i wish to change the values/ range of each series of the chart through vba. Thus far i have struggled due to the lack of intellisense, in which i tried
Worksheets(1).ChartObjects(2).Chart.Series("Fails").Values = Range("b12:b14")
with "Fails" being the name of that particular series.
I have a chart with 5 different series. Instead of editing each one, say the marker size, is there anyway I can change the marker size for all of the different series at the same time?
View 1 Replies View RelatedI have a small problem using the ‘sumproduct function’ which I am using it to calculate the area under curves using the following equation (=SUMPRODUCT((B10:B109-B9:B108)*(D10:D109+D9:D108))*0.5). However I have hundreds of curves to calculate the area under and the length of the data series for each curve is different, I am currently changing the length of the data series by hand. I have attached an example worksheet of 2 sets of data (the formula I am using at the moment is highlighted in blue – row 203). Is there are function or formula that I can use inside this equation to change the range of the formula depending on the length of the data series?
View 2 Replies View Relatedi am trying to add 50 new data series and it takes hell of a lot of time to do it manually.
Sub Macro6()
Dim total As Integer
Dim Taper As Integer
Taper = 2
Do Until total < 100
total = total + 1
Taper = Taper + 1
ActiveSheet.ChartObjects(" Chart 3").Activate
ActiveChart.PlotArea.Select
ActiveChart.ChartType = xlBubble
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection("Total").XValues = "=Data!R" & Taper & "C6"
ActiveChart.SeriesCollection("Total").Values = "=Data!R" & Taper & "C8"
ActiveChart.SeriesCollection("Total"). Name = "=Data!R" & Taper & "C9"
ActiveChart.SeriesCollection("Total").BubbleSizes = "=Data!R" & Taper & "C7"
Loop
End Sub
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
View 5 Replies View RelatedI have a chart with coloring for specific series sets. When I create a similar chart, can I copy the formatting from one range to the other? Why does it default to certain styles?
View 1 Replies View RelatedI have a combination column and line chart with the line series on the secondary axis. Is there a way that I can tell excel to scale the secondary axis so as the line always appears above the columns? As it is it appears above in most instances but sometimes appears below the columns.
View 2 Replies View RelatedThe charts I received have many Series formulas that reference and external spreadsheet
Is there a way that I can modify them and reference the same sheet name but locally
For your information
When selecting menu Formulas and then "Show Formulas" chart data series do not display
When selecting a Chart the "Show Formula" selection is not available (at least I did not find it)
In addition, when selecting the Chart, Then Design, then "Select Data", it replies in the pop-up with the comment "The data range is too complex to be displayed...."
There are about 40-60 formulas as shown below!!
The sheet name with data is D_Brand_Q
HTML Code:
' here is a sample of the current formula
=SERIES('C:2011-12-Jul-Nov[2011_06_Sales.xls]D_Brand_Q'!$CC$1,'C:2011-12-Jul-Nov[2011_06_Sales.xls]D_Brand_Q'!$E$197:$E$218,'C:2011-12-Jul-Nov[2011_06_Sales.xls]D_Brand_Q'!$CC$197:$CC$218,2)
' This is the desired formula
=SERIES(D_Brand_Q!$CC$1,D_Brand_Q!$E$197:$E$218,D_Brand_Q!$CC$197:$CC$218,2)
I have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
Sheet1
*EFGH5*Week 1Week 2Week 36Product 11,234,123 1,258,805 1,283,982 7Product 21,234,223 1,258,907 1,284,086 8Product 33,423,321 3,491,787 3,561,623 9Product 4342,121 348,963 355,943 10Product 52,343,424 2,390,292 2,438,098
Excel tables to the web >> Excel Jeanie HTML 4
I have a xy chart with two sets of data, New and Reference. I want New to be the first entry in the legend and to show up on top when the two lines overlap.
Is it possible to independantly change the width of donut chart series? I want the outer ring of the donut to be slimmer than the inner ring.
View 4 Replies View RelatedI just joined ozgrid and this is my very first post. I have read the rules but spare me if I make some errors.
My question is related to plotting time series charts using VBA. I have data in the following format.
04/21/08 9:04:47 4.5055
04/21/08 9:04:48 4.5055
04/21/08 9:04:49 4.5055
04/21/08 9:04:49 4.5055
04/21/08 9:04:50 4.5055
04/21/08 10:05:00 3.5055
04/21/08 10:05:32 3.5055
04/21/08 10:05:40 3.5055
04/21/08 10:05:48 3.5055
04/21/08 10:05:51 3.5055
04/21/08 11:07:59 5.5055
04/21/08 11:09:00 5.5055
04/21/08 11:10:01 5.5055
04/21/08 11:11:02 5.5055
04/21/08 11:13:08 5.5055
04/21/08 11:14:11 5.5055
04/21/08 11:15:16 5.5055
The column on the left is NOW() output and the one on the right is data corresponding to the given date and time. You may interpret the above data as snapshots taken at regular time intervals.
Now what I want to do is make a chart with the above data. Where ever there is a break in the snapshots, represented by a blank line, I want the graph to jump to the next data point much as the way stock prices move from the closing price to the opening price on the next day. I am not able to figure how to do that. Since I want the x-axis to represent time, using scatter charts does not work since the intervals are not proportional to the time then.
Any way to be able to toggle (checkbox) a particular series in a chart.
I found this old thread that shows a simple method: [URL]
BUT, I do not want the series to appear in the legend if it is not plotted.
I would like to display the latest data label value for a data series So if I update my table for period 2 the chart should update to display only this value. Then period 3 and so on Workbook attached
View 3 Replies View RelatedI am applying for a job as an executive assistant and before the interview I have to complete a "test." I am having trouble with one direction. Here is the question:
"10.Apply series name and legend key in data labels to the Star data series. "
I have included what I think is the correct answer, but I am not sure. It is under the column chart sheet.
I'm trying to use VBA to automatically change the data displayed in an excel chart. To do this I count the number of items displayed on the chart using Chart.Seriescollection.Count. I then loop over the Chart.Seriescollection(x) and try to change the Chart.Seriescollection(x).Formula string to link to the cells I want.
Problem is that, sometimes, the cells the curve is currently linked to are empty. Such a curve does show up in the Count, but I can't access the .Formula, even though this can be done manually from within Excel.
I have a spreadsheet which reports across different categories, but there's a lot of info. So simplify this, I've written a simple macro that changes the series range in an existing chart, so top level and by category. This works well apart from I'm using excel 2007, and some people aren't, so the default colours look fine on my version, but change to some awful colours on anyone with an earlier version of excel. I need a way of changing the colours to standard ones depending on which macro is being run.
I have tried running the following, but I get an error, basically saying the series hasn't been selected.
ActiveSheet.ChartObjects("Chart 6").Activate
ActiveChart.SeriesCollection(3).Select
ActiveChart.SeriesCollection(3).Interior.Color = RGB(255, 0, 0)
I'm trying to change 115 charts so that the Xvalue axes (Y-axes) will start on the lowest value of my data series. This is what I've come up with so far:
[Code] .....
What is the syntax to set instead of X so that all Xvalue axes is set to the lowest Data series value in individual chart?
I have a series of numbers in one column. Is there some way I can divide all the numbers together by, say 10, without doing it manually?
eg.
12
15
15
25
20
should become
1.2
1.5
1.5
2.5
2.0
Is there a way in Excel to do that?
I'm trying to change the default option for the data series when graphing in Excel 2003 .... I am trying to create a line graph
Excel, by default, is putting static pressure on the x axis and the air flow on the y axis .... I need it to be the other way around
I have found out that:
By default, Excel plots whatever you have fewer of—rows or columns—as the data series
apparently it is possible to change this Excel default option, but I can't figure that out
in step 2 of the Chart Wizard, I have tried many different things, but can't get Excel to chart the Air Flow CFM on the x axis, and have static pressure values on the y axis
I still get the 'Object doesn't support this property or method. Error code 438' error. I am using Excel 2010
VB:
j = 3
Do Until j = 6
ActiveWorkbook.Sheets(k).Activate
Set chartX = ActiveSheet.ChartObjects("X")
[Code]....
The macro is supposed to dynamicaly adjust series range for 3 charts for x,y,z, values in each of sheets. Charts are a line type.
I have the following code for a sheet in my workbook that has 3 charts:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.Calculation = xlCalculationManual
ActiveSheet.ChartObjects("RdteObs").Chart.SetSourceData ThisWorkbook.Names("GSumRdteObs").RefersToRange
ActiveSheet.ChartObjects("RdteWip").Chart.SetSourceData ThisWorkbook.Names("GSumRdteWip").RefersToRange
ActiveSheet.ChartObjects("RdteExp").Chart.SetSourceData ThisWorkbook.Names("GSumRdteExp").RefersToRange
Application.Calculation = xlCalculationAutomatic
End Sub
but whenever the sub runs, I get this error message: "Excel cannot complete this task with available resources. Choose less data or close other applications." Does anyone have an idea what's going on?
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I have attached xl sheet for ref.
I have value in E2(5),F2(10)=G2(5[sub of F2-E2])
I need to find E2(5) value in B2:B21 and the same of F2 also
After finding that
(eg): E2 value 5 present in B6 cell and it should come to c6 cell same of F2 also
Now It should select C6 to C11 cells.(ref of B6 to B11,ie,5 to 10)
I tried in vba and formuals but i couldnt find solution.
I have a chart that I want to be the same across multiple worksheets. The data ranges don't move, but the data may be different. It is cumbersome to go and retype the name of the sheet every time this chart is placed.
I have tried using named ranges. My named range X is !$A$1:$A$30 so that it will refer to the active sheet. If I place this in cells on the spreadsheet, it works. If I place "=X" in the values entry for the source data of the chart, I get a formula error.
I have a Defined Dynamic Name which is used to select my data. How do I call that when I create a chart in excel within the data source, so that the data source always refers to this dynamic range.
I have data A B C D E
1 2 3 4 5
9 4 5 6 7
this is so the series names will be the row and for each series the rows represent the data within each of the columns. I have a dynamic range that always selects the whole range called chartdata. How do I put that in the data source when it asks me in Excel 2007 as there is no wizard for seprate x and y ranges in this version.
I have a chart in excel, I want to click on the chart and run a macro that will return the source data location/ range (e.g. "A1:C12"). Assume you do not know the range, but only see the chart. I tried using activechart.setsource.select doesn't work. If i were to click on another chart, run macro and the range will be saved into a variable where the variable is holding the range of the source data location.
View 4 Replies View RelatedMy DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
I understand that you can do dynamic named ranges for graphs, using one named range for each series and another for the categories. However, the graph I'm working on will have a lot of series'. Is there a way to do this cleverly? I'm trying to avoid making a named range for each one.
View 2 Replies View RelatedI'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies View Related