Copy Userform To Clipboard And Save As JPEG
Nov 24, 2009
I am on the final part of a visitor log and I am stumpped on how to finish it. I have a electronic signature pad (Interlink Electronics-ePad) that the controls will not allow me to use in VBA for excel, I can get the image and signature on my usersform but am unable to save just the image through any code.
All I have been able to come up with at this time is saving the userform and pasting it in the active worksheet (code for this I found here written by "Michel Pierron"). What I would like to be able to do is have the userform image cropped to where the "Image1" image is (Signature will be in it place when done, the OCX esign block will not show on upload) and then saved as "visitors name, date/time.JPEG" to a folder in my documents.
The attached file is a stripped down version of what i have so far with no checking involved, just trying to get the save part of this done. If all I can do is save the userform as a whole that would work also but would like to be able to change it to a jpeg for storage. Have tried to use epads SDK's to achieve a saved signature but haven't been able, was suppose to be on vacation this week but need to get this done before the 1st.
View 5 Replies
ADVERTISEMENT
May 26, 2014
I have a user form where people fill in data into text boxes. some text boxes remain hidden if the user does not need to fill in the requested field. but when the command button is submitted all text boxes hidden or otherwise are copied to clip board.
VBA in order for only visible text boxes to be copied to clip board. I was thinking of some sort of if statement around the vba to copy to clipboard but nothing i use works.
View 5 Replies
View Related
Nov 1, 2012
I am trying to save a range as a graphic image file (jpg, png). I know I can paste it into a graphics program, like Paint, but was hoping for something a little more straightforward.
I found this article on the Microsoft website which claims to provide a way to save a picture as a graphic image, so I thought I could save the range as a picture and then save that as a graphic file.
Save a picture as a .jpg, .gif, or .png - Excel - Office.com
It works up through step 4. Step 5 doesn't work as advertised for me.
Before starting the procedure in the above link, I first create a graphic image of the range in the worksheet:
Select the range.Copy to clipboard (C-C).Paste as Picture (Paste > As Picture > Paste as Picture).
Now I have the cell range as a picture in the worksheet, so I try the procedure outlined in the link above:
Select the picture.Copy to clipboard (C-C).Paste special (Paste > Paste Special).In the Paste Special dialog box, select a graphic format, such as JPEG, and click OK. This creates a second graphic image in the worksheet.Right-click the image, then click Save as Picture. This option is not available on my right-click dropdown menu.
Is there any simple way to save a cell range as a graphic file without resorting to a graphic program or a macro?
View 2 Replies
View Related
Nov 15, 2011
I have the following challenge: In VBA I copy from a file (and the copied area goes on the clipboard). The clipboard contents is then copied into another workbook and worksheet. Closing the file (close workbook) from where I have copied, I get the question: "do you want to save the clipboard contents, etc., etc, " ending with the buttons YES or NO to be pushed. How can I disable this question in VBA.
View 3 Replies
View Related
Mar 29, 2007
I have a spreadsheet where i need to disable Cut but allow copy & paste. This must stop dragging and dropping and only apply to the workbook in question, i.e. if I CTRL-TAB to another workbook cut is re-enabled. I have used the following code
Private Sub Workbook_Activate()
enableCut enable:=False
End Sub
Private Sub Workbook_Deactivate()
enableCut enable:=True
End Sub
Public Sub enableCut(enable As Boolean)
Dim cBar As CommandBar
Dim cbCtrl As Office.CommandBarControl
With Application
If enable Then
.OnKey "^x"
.OnKey "+{DEL}"...................
View 2 Replies
View Related
Jul 16, 2014
Iam trying to copy the web page contents into a word document, but i m recieving a below message @ line
"oIE.document.body.createTextRange.execCommand ("Copy")"
Object Doesn't support this property or method
View 7 Replies
View Related
Nov 1, 2011
I can't copy any item into clipboard
View 4 Replies
View Related
Feb 21, 2012
I am using the following code in a template I have created for my department. I am copying a formula from the 7th row of the specified columns and want to copy and paste the row down to the "last row" which I have specified from an input box. I am trying to do this without using the clipboard, because some files are 50,000 lines or more and I want to speed this process up.
In the code where I have say Sheet4.Range("A8:I140000") I would like to use last row somehow like Sheet4.Range("A8:Lastrow")
View 8 Replies
View Related
Jun 26, 2009
There is an text string and I need to copy it to Windows clipboard to have a chance to use it later anywhere by Ctrl+V.
Simple, isn't true? But how to do it?
View 5 Replies
View Related
Aug 23, 2006
I have a legacy Excel VB application with multiple sheets. When the
users tab from sheetA to sheetB the paste buffer is cleared. This might
be due to the fact that sheetB has Worksheet_Activate processing that
does some validation and refreshes a pivot table (on sheetB).
Is there a way to reserve and restore the contents of the paste buffer,
and make sure the user can actually paste values from sheetA to sheetB
(using either Ctrl-V or Edit-Paste)?
View 3 Replies
View Related
Jul 12, 2007
I want to create a macro that will copy the stat that is displayed in the status bar (bottom right corner - e.g. Sum, Count, Max, Min, etc.) into the clipboard in order to paste it to another workbook or worksheet. At present, I'm creating a formula on the active sheet and pasting the value to the detination sheet/workbook. Since I have to do this many times over, I'd prefer to have a macro to copy the value in the status bar to the clipboard, and simply pasting.
View 7 Replies
View Related
Jan 30, 2014
I've wrote a function that allows me to insert a certain range to the body of an email. This email is composed in the code, too.So far I am able to build the emails body as plain text. how to retain the cell format also (colors, font size, border styles, ...)
View 14 Replies
View Related
Sep 28, 2009
I do lots of web form fill up from excel spreadsheets to a web form.
To copy a cell what I can do is,
select a cell
ctrl+c
What I need is when I select a cell, ctrl+c will be triggered auto. So no need for pressing ctrl+c to copy a cell to clipboard.
View 9 Replies
View Related
Jul 11, 2013
I know this: ActiveCell.Address Will return the current cell address, but i want to be able to copy it to the clip board so I can paste it.
View 7 Replies
View Related
Sep 28, 2009
I do lots of web form fill up from excel spreadsheets to a web form.
To copy a cell what I can do is,
select a cell
ctrl+c
What I need is when I select a cell, ctrl+c will be triggered auto. So no need for pressing ctrl+c to copy a cell to clipboard.
How can I do it?
View 9 Replies
View Related
Oct 7, 2013
this code to minimize it and avoid copy to clipboard.
VB:
Sub SapOutputRun()
Application.EnableEvents = False
Application.ScreenUpdating = False
[Code].....
View 2 Replies
View Related
Apr 20, 2014
Using the code below I can't clear the clipboard, the range still selected after copy and paste. Obviously, "Application.CutCopyMode = False" failed. Is there a way to deselect/clear? Using Excel 2010.
View 4 Replies
View Related
Feb 12, 2008
Need aid in copying certain cells with text/labels to clipboard to format a body of email to be sent via Yahoo webmail, so I can paste it where needed.
I did a couple of Excel VBA's back in 2000 or so at last job but haven't seen/used VBA since.
Have a spreadsheet with customer data, (one cust per row) and wish to create something like the following in clipboard (in this example, assuming row 2 is the selected row)...I'll only be sending out one or two of these per day so nothing fancy is needed, just a way to avoid retyping critical data that could get mistyped.
--------------------
A8
Rental details for 2008
Customer Name : A2
Unit nbr : A3
Nbr of weeks : A4
Balance due : A5
--------------------
I'm using Office 2000 still...I've done some searching but results found seem to complicated for my situation or not quite close enough for me to see how to apply it.
View 9 Replies
View Related
Mar 27, 2008
I have a sheet which I would like to back up online every time it is saved.
I have a sub, OnlineFile(), which I have used many times without any problems, which creates a .BAT file to use ftp to upload files onto our server. As arguments, it takes the local file path that you want to upload (or download to), the name of the file as you would like it stored, the online file path, and whether you want to upload the file onto the server, or download it off the server.
It should be very easy to combine the two: what I tried was:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, cancel As Boolean)
ThisWorkbook.SaveCopyAs ThisWorkbook.Path & "" & "Rubbish.xls"
Call OnlineFile(ThisWorkbook.Path & "" & "Rubbish.xls", "Rubbish.xls", "wwwrootexcelfilesMasters", "Upload")
Kill ThisWorkbook.Path & "" & "Rubbish.xls"
End Sub
Every time I ran this, the file got uploaded correctly, but Excel had a series of problems. Often the code ran fine the first time it was run, but crashed the second time round.
After a fair bit of troubleshooting, I found that the problem came about when the file was trying to save itself - i.e. after the end of the sub. If you pause any macros from running, it still saved fine, but when the code ran, it found errors, froze or closed excel.
My thought at this point was that the code was fragmented or something. I made a new sheet, and retyped just the relevant bits of code (i.e. the BeforeSave sub, the OnlineFile sub and created the form called by OnlineFile). The problem persisted.
I've come up with a workaround for this now (which uses the same OnlineFile sub & form, and works fine), but it's driving me crazy - why does this cause excel to die? Particularly on the second time through? The code seems far too simple to cause such problems - is there a bug in Excel perhaps (I'm using Excel 2000 on Windows XP).
View 9 Replies
View Related
Jun 14, 2007
Here’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
View 4 Replies
View Related
Apr 4, 2014
I have attached an example of what I am trying to achieve. I am looking to have a photo [jpeg] embedded into a cell so that when I call the cell up in a match formula it will call up the photo. I tried a couple of VB codes I found on the web but cannot get this to work.
View 4 Replies
View Related
Oct 13, 2009
I was wondering that if it was possible to export a sheet as a jpeg. I have multiple sheets that I am having to print and then scan so that other people can see the image.
View 5 Replies
View Related
May 18, 2012
I am trying to use data in rows on an Excel worksheet to make name tags for an event. I am trying to put a jpeg image in an Excel cell and then use the image, along with other data on the worksheet to merge with Word.
I've tried attaching a picture/image to a comment in a cell, but I could not get the image to appear on the merge when I selected it.
how to get the image in the cell and then be able to use it for the merge?
View 1 Replies
View Related
Sep 4, 2007
I have 50 word docs where people have pasted powerpoint slides as pictures but just used copy and paste rather than paste special, this means when pasted the file sizes are massive.
I have an excel spreadsheet with hyperlinks to evry document where the file sizes are massive and its taking up so much file space.
I was wondering if anyone has a macro or can hlp me with one that, when i click on a link to the word doc, it would open the word doc, and change the picture from .ppt to .JPEG then close the word doc when done.
Im not sure if this is even do-able, infact i am probably talking rubbish, but it would save me like 2 weeks if ti was possible.
View 9 Replies
View Related
Feb 1, 2013
I have a sheet with two columns; Column "A" has a list of existing filepaths of jpeg files that I would like to rename to the value in Column "B" in the same row. Is it possible for VBA to open each picture file and rename? Or open the parent folder and rename from there?
View 4 Replies
View Related
May 17, 2007
I want to create a userform that users can fill out and then be able to save so that it can be emailed/saved with that data. I guess my first question is can this be done? What I have so far is the userform and a save button. Now what do I need to do to allow a user to populate this form and save the form with the data so that it can be attached in an email or just saved to a folder?
Private Sub CommandButton1_Click()
Application. ScreenUpdating = False
Dim Fname As Variant
' Opens Save dialog box
Do
Fname = Application.GetSaveAsFilename( _
fileFilter:="Excel Files (*.xls), *.xls")
Loop Until Fname <> False
ActiveWorkbook.SaveAs Filename:=Fname
Application.ScreenUpdating = True
Unload UserForm1
ThisWorkbook.Close True
End Sub
Private Sub UserForm_Initialize()
End Sub
View 9 Replies
View Related
Apr 6, 2014
i have some files similar to:
A103.jpg
GU23.jpg
CU27.jpg
i want in Cell A1 type by sample: GU23 and then pressenter or press a button, and incell E1 display the jpg image with a specific Size, mmm 40x40
View 2 Replies
View Related
Jan 4, 2013
I have a userform where data is entered and upon pressing submit it saves the workbook. this has been working fine, but all of a sudden today it has stopped saving.
I have tried using ThisWorkbook.Save and Activeworkbook.save and both appear to save (i see the "saving" dialogue box), the data is submitted into the spreadsheet behind the userform. But as soon as i close and re-open it, the data isnt there.
I assumed it may be some sort of permissions issue where the file is located. But if i manually enter the data into the spreadsheet and press save, it works and retains the data! So it appears to be something wrong with my userform, which has magically happened over night.
View 2 Replies
View Related
May 23, 2012
Am creating a large medical teaching database on Excel that lists JPEG images (a few hundred) and the file paths for each image into separate Excel columns using a VBA macro.
The JPEG image filenames are numbered in ascending numerical format (i.e 1.jpeg).
View 1 Replies
View Related
Mar 20, 2014
I would like to add hyperlink to multiple JPEG images (separately) in Excel 2003 and send those images via email to another person. On receiving the mail at the opposite end, the person concerned should be able to view the images by clicking the link. How to do?
View 1 Replies
View Related