Copy The Text From Variable To Clipboard
Jun 26, 2009There is an text string and I need to copy it to Windows clipboard to have a chance to use it later anywhere by Ctrl+V.
Simple, isn't true? But how to do it?
There is an text string and I need to copy it to Windows clipboard to have a chance to use it later anywhere by Ctrl+V.
Simple, isn't true? But how to do it?
Need aid in copying certain cells with text/labels to clipboard to format a body of email to be sent via Yahoo webmail, so I can paste it where needed.
I did a couple of Excel VBA's back in 2000 or so at last job but haven't seen/used VBA since.
Have a spreadsheet with customer data, (one cust per row) and wish to create something like the following in clipboard (in this example, assuming row 2 is the selected row)...I'll only be sending out one or two of these per day so nothing fancy is needed, just a way to avoid retyping critical data that could get mistyped.
--------------------
A8
Rental details for 2008
Customer Name : A2
Unit nbr : A3
Nbr of weeks : A4
Balance due : A5
--------------------
I'm using Office 2000 still...I've done some searching but results found seem to complicated for my situation or not quite close enough for me to see how to apply it.
Iam trying to copy the web page contents into a word document, but i m recieving a below message @ line
"oIE.document.body.createTextRange.execCommand ("Copy")"
Object Doesn't support this property or method
I can't copy any item into clipboard
View 4 Replies View RelatedI am using the following code in a template I have created for my department. I am copying a formula from the 7th row of the specified columns and want to copy and paste the row down to the "last row" which I have specified from an input box. I am trying to do this without using the clipboard, because some files are 50,000 lines or more and I want to speed this process up.
In the code where I have say Sheet4.Range("A8:I140000") I would like to use last row somehow like Sheet4.Range("A8:Lastrow")
I have a legacy Excel VB application with multiple sheets. When the
users tab from sheetA to sheetB the paste buffer is cleared. This might
be due to the fact that sheetB has Worksheet_Activate processing that
does some validation and refreshes a pivot table (on sheetB).
Is there a way to reserve and restore the contents of the paste buffer,
and make sure the user can actually paste values from sheetA to sheetB
(using either Ctrl-V or Edit-Paste)?
I want to create a macro that will copy the stat that is displayed in the status bar (bottom right corner - e.g. Sum, Count, Max, Min, etc.) into the clipboard in order to paste it to another workbook or worksheet. At present, I'm creating a formula on the active sheet and pasting the value to the detination sheet/workbook. Since I have to do this many times over, I'd prefer to have a macro to copy the value in the status bar to the clipboard, and simply pasting.
View 7 Replies View RelatedI have a user form where people fill in data into text boxes. some text boxes remain hidden if the user does not need to fill in the requested field. but when the command button is submitted all text boxes hidden or otherwise are copied to clip board.
VBA in order for only visible text boxes to be copied to clip board. I was thinking of some sort of if statement around the vba to copy to clipboard but nothing i use works.
I've wrote a function that allows me to insert a certain range to the body of an email. This email is composed in the code, too.So far I am able to build the emails body as plain text. how to retain the cell format also (colors, font size, border styles, ...)
View 14 Replies View RelatedI am on the final part of a visitor log and I am stumpped on how to finish it. I have a electronic signature pad (Interlink Electronics-ePad) that the controls will not allow me to use in VBA for excel, I can get the image and signature on my usersform but am unable to save just the image through any code.
All I have been able to come up with at this time is saving the userform and pasting it in the active worksheet (code for this I found here written by "Michel Pierron"). What I would like to be able to do is have the userform image cropped to where the "Image1" image is (Signature will be in it place when done, the OCX esign block will not show on upload) and then saved as "visitors name, date/time.JPEG" to a folder in my documents.
The attached file is a stripped down version of what i have so far with no checking involved, just trying to get the save part of this done. If all I can do is save the userform as a whole that would work also but would like to be able to change it to a jpeg for storage. Have tried to use epads SDK's to achieve a saved signature but haven't been able, was suppose to be on vacation this week but need to get this done before the 1st.
I do lots of web form fill up from excel spreadsheets to a web form.
To copy a cell what I can do is,
select a cell
ctrl+c
What I need is when I select a cell, ctrl+c will be triggered auto. So no need for pressing ctrl+c to copy a cell to clipboard.
I know this: ActiveCell.Address Will return the current cell address, but i want to be able to copy it to the clip board so I can paste it.
View 7 Replies View RelatedI do lots of web form fill up from excel spreadsheets to a web form.
To copy a cell what I can do is,
select a cell
ctrl+c
What I need is when I select a cell, ctrl+c will be triggered auto. So no need for pressing ctrl+c to copy a cell to clipboard.
How can I do it?
this code to minimize it and avoid copy to clipboard.
VB:
Sub SapOutputRun()
Application.EnableEvents = False
Application.ScreenUpdating = False
[Code].....
Using the code below I can't clear the clipboard, the range still selected after copy and paste. Obviously, "Application.CutCopyMode = False" failed. Is there a way to deselect/clear? Using Excel 2010.
View 4 Replies View RelatedOn the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedHere’s what I want to do in VBA
1. Put a value in cell H1 (text and numbers)
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
Does clipboard method gettext retreive the text from clipboard only, not number? What if numbers are copied (Ctrl C) to clipboard?
View 9 Replies View RelatedI tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I am using the following code.
Function VLOOKUPRow()
Dim SV As Object
Worksheets("Midterm").Select
SV = "UserFormAppend.TextBoxInvID.Text"
VRow = Columns(1). Find(What:="SV", After:= Cells(1, 1), _
LookIn:=xlValues, SearchOrder:=xlByRows, _
SearchDirection:=xlPrevious, MatchCase:=True).Row
MsgBox (VRow)
End Function
I am trying to give the VRow variable the value or the row that The text from my text box is on. How do you make the what look for a variable. I can get it to work if i put a constent in the what. how to make the what look for a variable. I'm new at this forum thing so im not quite sure how to check for answers.
Can i put the value or range of the clipboard in a variable?
I have a macro that put the cutcopymode at false but i want to put the clipboard in a variable before putting the cutcopymode at false.
I would like to do the following in a copied down row where n5 is a cell that contains a number that is added to a row number in order for the range to maintain n5 rows when copied down.
=average(b1:b1+n5)
I'm trying to clear the clicpboard using VBA so i don't get messages asking me what to do. is this possible and if so how? i could simply turn all alerts off but i rather not.
View 3 Replies View RelatedI am running into trouble with too much data accumulating on the clipboard in XL2007, so is there any way to set cutcopymode=false (or some other function) so that the clipboard is automatically cleared after every paste event throuout a macro project without having to restate cutcopymode=false after every paste?
View 7 Replies View RelatedI am looping through and copying screens of mainframe data and appending them to the clipboard. Once done, I start a Notepad and paste it for future massaging. Now I need to perform a check on each screen which requires copying something from the screen, assigning to a variable, and checking it. This overwrites what I've already stored on the clipboard. Is there a way to store what I've got on the clipboard, then use the clipboard for something else, and then reload the clipboard?
View 3 Replies View RelatedI'm currently opening up worksheets, copying the data there inside tables and pasting it over to a new worksheet which is basically the summary of all the data, unfortunately because I am moving large amounts of data, half way through the process I get a pop up asking me if I want to copy data to wherever to make sure it's stored or do I want to loose it, of course it's only a matter of hitting the no button to re-write the data so copy and paste carries on working but is there no function in VBA to clear the clipboard after every copy and paste, such as clipboard.clear, or something along those lines? Anything that will stop this message from appearing, I was my summary worksheet to work without popups appearing because then that would mean someone would have to sit there as it copies and pastes values, clicking no every time the clipboard gets full.
View 3 Replies View RelatedI have some code that uses a form so you can choose the folder that contains all the spreadsheets that I need to copy. My issue is I have about 20 spreadsheets, some have the tab labled M3 and others Sheet1. Next is each spreadsheet has a different amount of rows in them. My data will always start in cells B4:N4 but may 20, 100, 1000 rows long.
My code works but only copies the first four rows of the last sheet open.
Code:
Private Sub cmdbtnProcess_Click()
Check_Path
End Sub
Sub Check_Path()
If txtboxPath.Value = Empty Or txtboxFile.Value = Empty Then
[Code]...
Here is my problem. I have a a workbook with 2 sheets.
Sheet 1= Data sheet; Sheet 2 = Table
On sheet 2 I want to copy down an entire row (A8:AH8) but the problem is that the number of copied rows depends on the number of rows contained in sheet 1 column A (-1 row)
So if i have 101 records (100 +label) in column A sheet 1, in my sheet 2, it must copy down the formulas from (A8:AH8) until (A107:AH107)
A
B
1
AAPL
MSFT
2
='C:Documents and SettingsSASTCMy DocumentsStock Data[AAPL.csv]AAPL'!E2
='C:Documents and SettingsSASTCMy DocumentsStock Data[MSFT.csv]MSFT'!E2
How should i COPY automatically "XYL" written as in formula (XYL.csv and XYL') comprehending with the top bar?
Tried "&C1&" but it`s not working.
I have below code (option 1) I was hoping would do what I need except instead of copying formula from A1 it copies values... (option 2) copies formula but does not preserve references...any ideas how to copy exact formula so that references are not changed?
Assumptions:
A1 formula = SUM(B2:E2)
in A5 I would like to copy exact formula to keep references to row 2...
I agree I could use $ in original formula but that would complicate other requirements.
OPTION1:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
Range("A5") = vRange1
End Sub
OPTION2:________________
Sub test_var_object()
Dim vRange1 As Range
Set vRange1 = Range("A1")
vRange1.Copy
Range("A5").PasteSpecial
End Sub