VBA To Copy Selected Cells To Clipboard With Text Data
Feb 12, 2008
Need aid in copying certain cells with text/labels to clipboard to format a body of email to be sent via Yahoo webmail, so I can paste it where needed.
I did a couple of Excel VBA's back in 2000 or so at last job but haven't seen/used VBA since.
Have a spreadsheet with customer data, (one cust per row) and wish to create something like the following in clipboard (in this example, assuming row 2 is the selected row)...I'll only be sending out one or two of these per day so nothing fancy is needed, just a way to avoid retyping critical data that could get mistyped.
--------------------
A8
Rental details for 2008
Customer Name : A2
Unit nbr : A3
Nbr of weeks : A4
Balance due : A5
--------------------
I'm using Office 2000 still...I've done some searching but results found seem to complicated for my situation or not quite close enough for me to see how to apply it.
How to turn off or default the warning box message ...
"Data on the Clipboard is not the same size and shape as the selected area. Do you want to paste the data anyway"
I hate having to click yes on this every time I paste something. I do it hundreds of times a day.
My tables is centered and merged because my external date changes sizes each time I paste to the table.
I have looked all over to try and find an "OFF" warning/message button for this. I just want to know how to turn it off or default it to never pop up again!
I have a macro that loops through several workbooks and copies data to one common sheet. Works great with one flaw that I have not been able to resolve. I am using the End Property example below, this works great as long as there are more than one cell with data. With one cell having data this takes you to the bottom of the sheet.
Need code to select from a specific cell to the last cell in that column with data where when the selected cell is the only one with data that would be the only cell selected.
I am using this code to hide or unhide rows of text on another sheet:
VB: Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String Dim sValue As String
'Get the address of the cell that changed without '$' signs sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB: If Target.Value = "Not Pursuing" Then ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have a userform in which I wish to use custom buttons for several commands. My userform users aren't going to be very computer skilled and may not know the CTRL+C or CTRL+V command so I am hoping to put in small image buttons representing each command to be able to copy (and paste if necessary) their selection in a TextBox on a MultiPage'd UserForm.
Is there any way of doing this? I've had a look through the forums and seen several examples of how it can be possible to copy and paste but not in the method I'd prefer to have it on this UserForm.
I also use VBA in a terminal emulation program that I use the following command to 'screen scrape' the current display memory and quickly Save it to a .txt file:
.SaveDisplayMemory "C:File1.txt", rcOverwrite What I want to do in Excel is, Copy the current selected Range() and Save it to a .txt file.
I know how Save the current Sheet to a .txt file, but can't figure out how to Save just a Range() of cells.
I would like some code to allow the user to select any row in Sheet1 and then the populated cells (10 in every case) in that row will copy across to various locations in Sheet2.
eg, The user selects Row header for Row 12 which has 10 cells ( A12 to J12) populated. A12 will go to C3 on Sheet 2, B12 to D5, C12 to D9, etc, etc.
I am using vlookup to get some data from one shhet in my workbook onto the front sheet so I have a search box and the vlookup duly does as it should and gets me the data into E28:E100 and fills the cells to the right with corresponding data for each item Now I select any cell from the first column of the search results I want and it gets pasted into the next empty cell range C4:C22 all this works a treat thanks to lots of help from mr excel. What I want to do (without any more vlookups) is pick up the corresponding cells to the right of the selected cell and paste them into the cells to the right of the pasted cell. I cant do it all at once because there is a different amount of columns between the select area and the paste area... hope this is clear here is a snippet of code that lets me choose the cell to paste
Dim UserResponse as range 'InputBox to Ask the user to select the cell they want copying 'First direct them to the start cell in the column they are picking from Range("E28").Select On Error Resume Next Set userResponse = Application.InputBox("Choose from List Below", Default:=Selection.Address, Type:=8) On Error GoTo 0 If userResponse Is Nothing Then End
Else userResponse.Copy (here I want to get the address of the cell into store so I can pick up the addresss of 2 cells to the right of it ie selected cell is E54 and I want to copy that and G54 and N24 and paste them into C8 D8 and F8 repectively) End If
I am using the following code in a template I have created for my department. I am copying a formula from the 7th row of the specified columns and want to copy and paste the row down to the "last row" which I have specified from an input box. I am trying to do this without using the clipboard, because some files are 50,000 lines or more and I want to speed this process up.
In the code where I have say Sheet4.Range("A8:I140000") I would like to use last row somehow like Sheet4.Range("A8:Lastrow")
I have set up the attached workbook to try to show the results that I need using the matching shaded cells in the worksheets.
The first part of the problem is that all data in columns A, B, C & H (Input1) needs to be copied to columns A, B, C & F in Input2 with the addition of a Zero value in columns D & E (sample data lines 1 - 3).
The second part of the problem is that all data in columns A, B, & F (Input2) where the cell in column C is equal to ZERO needs to be copied to columns A, B & C in Input 3 (sample data Lines 4 - 11).
It would also be useful to be able to copy data in columns A, B, & F (Input2) where the cell in column C is NOT equal to ZERO to columns A, B & C in Input 3 (sample data Lines 12 - 25). However, there will be often be more than value in column C (Input2) dictated by the date in Column A and number in Column B. The value in Column F (Input2) will always be the same for each of those rows, so it does not need to be duplicated in Column C (Input3).
This would have to be manually triggered by linking it to a button or menu item, not sure what would be the best option. As data is entered at various times of the week, the routine would either have to overwrite existing matching data or carry on from where it last finished!
I have some selected cells in column A, they are not consecutive. I would like to copy these values and then copy the same area but from a different column...
The code I have here is only working when I have a consecutive selection.
Code: Set rng = Selection fr = rng.Cells(1, 1).Row lr = rng(rng.Count).Row rng.Copy
I want to select the rows that i want to copy then I would like a command button to unlock the sheet using password "2014", copy & paste my selection in the last empty row, and then lock the sheet.
I have a legacy Excel VB application with multiple sheets. When the users tab from sheetA to sheetB the paste buffer is cleared. This might be due to the fact that sheetB has Worksheet_Activate processing that does some validation and refreshes a pivot table (on sheetB).
Is there a way to reserve and restore the contents of the paste buffer, and make sure the user can actually paste values from sheetA to sheetB (using either Ctrl-V or Edit-Paste)?
I want to create a macro that will copy the stat that is displayed in the status bar (bottom right corner - e.g. Sum, Count, Max, Min, etc.) into the clipboard in order to paste it to another workbook or worksheet. At present, I'm creating a formula on the active sheet and pasting the value to the detination sheet/workbook. Since I have to do this many times over, I'd prefer to have a macro to copy the value in the status bar to the clipboard, and simply pasting.
write a macro - Condition: When i select "Audit Round" = "Round 1" in B2 and press a button it will automatically copy data from B5:B8 and paste special value in C5:C8. Likewise if I select "Audit Round" = "Round 2" in B2 then it should lookup "Round 2" in "Row 4" and paste special values from B5:B8.
I have a folder "D:Documents and SettingsRakesh", which has many .xls files. Each file has a sheet called 'Cover Note'. I want to copy cells B2, C2, D4 and F3 from 'Cover Note' of each file.
These cells should be pasted in the current sheet, one row for each file. First cell of each row should have the source file name.
It would be better if macro can prompt to select the directory where ther source files resides.
I have a user form where people fill in data into text boxes. some text boxes remain hidden if the user does not need to fill in the requested field. but when the command button is submitted all text boxes hidden or otherwise are copied to clip board.
VBA in order for only visible text boxes to be copied to clip board. I was thinking of some sort of if statement around the vba to copy to clipboard but nothing i use works.
I've wrote a function that allows me to insert a certain range to the body of an email. This email is composed in the code, too.So far I am able to build the emails body as plain text. how to retain the cell format also (colors, font size, border styles, ...)
I am on the final part of a visitor log and I am stumpped on how to finish it. I have a electronic signature pad (Interlink Electronics-ePad) that the controls will not allow me to use in VBA for excel, I can get the image and signature on my usersform but am unable to save just the image through any code.
All I have been able to come up with at this time is saving the userform and pasting it in the active worksheet (code for this I found here written by "Michel Pierron"). What I would like to be able to do is have the userform image cropped to where the "Image1" image is (Signature will be in it place when done, the OCX esign block will not show on upload) and then saved as "visitors name, date/time.JPEG" to a folder in my documents.
The attached file is a stripped down version of what i have so far with no checking involved, just trying to get the save part of this done. If all I can do is save the userform as a whole that would work also but would like to be able to change it to a jpeg for storage. Have tried to use epads SDK's to achieve a saved signature but haven't been able, was suppose to be on vacation this week but need to get this done before the 1st.
I need a macro to do this small task for me. Preferably it should execute when I have selected a cell and press a command button. Here's the way it should work:
