Copying And Pasting A List In Order To Print (using Check Boxes)
Aug 20, 2009
I have a sheet which contains a list of products. I have created a check box next to each name with the linked cell in the adjecent column. I have formatted the cell so you can see the TRUE or FLASE.
I need to be able to select different products and then when I run a macro, it places all of the selected products onto the second sheet. I just need it so it lists the products in column A with no blank rows.
Can this be done using Index/Match? Would a macro which achieves all this be possible?
I am working on a check box based list for work. The requirement is for the check box to be linked to the cell that it is in and then for conditional formatting to be done so that if the box is checked it goes green and if it is blank it goes red. This is fine for individual cells, but when i try and copy the formatting and cells throughout the worksheet it links all the cells back to the original cell.
I have a UserForm that I want to use as a “Print Selection Page” using check boxes to make selection or multiple selections of pages to print from different spreadsheets but same work book.
I use a Check Box method to print different sheets within same Workbook. I have a total of 18 Check boxes each check box represents a different sheet that can be selected, but I noticed if one sheet has a lot more data or photos than another it takes a longer to send to printer and in turn causes it to lag behind, at which it causes it to fall out of order. Is there a way to keep it in numeral order or ?
I have a consolidation workbook and source files.I would like to convert the data from the source files into a list format in the consolidation workbook.
I have attached a sample of the sheet format of the source files in the attached file, called 'Page 5'. The other 2 sheets are 'Template' and 'Instructions'. The 'Template' sheet is what I imagined would be the list format of the data copied from the 'Page 5' sheet. Instructions is where the lookup table for currency is.
So basically starting from row 8 in 'Template' sheet, I would like to copy and paste from 'Page 5' sheet to 'Template' sheet: - H2 to A8 & B8 - B2 to C8 - According to the list of currency in 'Instructions' sheet, lookup the currency according to operating unit in C8 and paste to D8 - D5-I5 to E8 - row A8-A23 to column F-N
I actually have had a similar problem before, which Derk has helped me here - link: Use Access or XL? (I've decided to start a new thread because this is a more relevant forum).
I have tried to modify the code but I am rather lost as to which part I am supposed to modify.. Note that in this code, the source data is in separate file instead.
Sub add()
Dim wb As Workbook, f As Worksheet, t As Worksheet, j As Integer, k As Integer, n As Integer Dim mty As String, yr As Integer, d As Date, bu As String, cur As String, sTodo As Variant
sTodo = Array("Page 5") 'finish adding the names Application. ScreenUpdating = False Set t = Workbooks("Example1.xls").Worksheets("Template") i = t.Cells(65536, 2).End(xlUp).Row
I have several series of 13 figures (from 0 to 20), such as :
000141833000001
I would like to filter those series with the following condition :
Each figure (except the zeros) should be higher or equal to the first figure (found on the right) which is not a zero.
In the example :
14 should be higher or equal to 18 : FALSE 8 should be higher or equal to 3 : TRUE 3 should be higher or equal to 3 : TRUE 3 should be higher or equal to 1 : TRUE
So, the serie is FALSE, due to the fact that 14 is not higher than 18.
I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data Column B: B2 of 'Source' Column C: B2 of 'Source' Column D: B1 of 'Source' Column E: row 6, relevant column column F: column K column G: row 5, relevant column column H: the specific amount
So basically I'm creating an entry for every amount in the table.
All sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
I have been working on an excel sheet with several text boxes that need data manually putting into them. I have set the texts boxes out in the correct order and could tab thru them perfectly in order, but then I saved, closed then reopen the document and now the text boxes do not tab in order. I have tried to rearrange them, delete them and start again but the same problem happens every time and I cannot get the tab order of the text boxes to stay in order
I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
AS you can see in the attached file, I have several collumns of data going form 2012 to 1992. I would like to know the quickest way to invert this so the data is presented 1992 to 2012.
I am developing a spreadsheet with numerous information on our different suppliers offices in the country for each of our outlets. I am tryin to define a way to do the following:
If a colleague selects a company another list will appear with the region and when the region is selected a list of the offices will appear.
Is it possible to print a workbook and have the "track changes on screen" show on the hard copy? I'm using Excel's track changes option to monitor changes to a workbook. I've selected the box "Highlight Changes on Screen". I would like the box containing the change (which pops up when you hover your mouse over the cell) to print out with the workbook so users can see what was changed when reviewing the hard copy. This is preferable to using the "List changes on a new sheet" option since it would require flipping between multiple pages.
I have 50 check boxes not on a user form, but on spreadsheet. I attached a button that says "Clear All" (meaning 'clear all checkboxes'). I can write a sub smth like
Private Sub CommandButton1_Click() CheckBox1.Value = False CheckBox2.Value = False End Sub
... and so on for all 50 check boxes. Any simpler way to do this in a loop? Smth like
For i=1 To 50 Checkbox............ .Value=False Next i
I've got cells which change after I use Solver to do simulations, These cells after the calculation is run I'd lke to paste into a seperate sheet and row for example (in preparating of charting them for example)..
I would like to paste it as folllows for example... .. but problem is, let's say the below list are in column A of the new sheet, than column B would be the first output of the calculation in the other sheet, column C would be the second output from the calculation in the other sheet. and so on..
I don't know the first thing on scripting, but I'd like to click on button where the calculations are made which when clicked on ,will paste to the other sheet in this sort of manner below.
Each calculation will use another column.. so the script must recognise there is other columns to the left already filled, ie. B, C, D, E F, coresponding to the results of calculations already performed.
Is there a way to a mass insert of Check Boxes without the cell link all being the same cell? I have a huge list of items that I want to put a check box next to each one. This way when my warehouse people check it off in the sheet one of the columns will read "Available".
Problem is when I put the first box in and cell link it to E4, and then copy and paste it, all the boxes toggle based on one another. Otherwise I have to put in 584 check boxes. Solutions or other recommendations are gladly welcome.
Also, is "True/False" the only available "response" when using Check boxes? (I Know I can write an equation based on the true false, but I am just curious)
I have a worksheet with a command button, this button opens a userform with check boxes. the user has 4 options and can select them all if they choose, they click the command button on the userform and then the original sheet gets populated with only specific data based on the variablesbut nothing happens.
Private Sub CmdStructStrategy_Click() FrmStrategy.Lbl1.Caption = "2007 Roll" FrmStrategy.Lbl2.Caption = "Flat Price" FrmStrategy.Lbl3.Caption = "Options" FrmStrategy.Lbl4.Caption = "Time Spreads" FrmStrategy.Show End Sub
I have a column of prices, I would like to have check boxes in a column beside the prices so that I can check the boxes and that they give me the sum of the prices that are checked.
I am using Excel 2007 on Windows XP. I have written up a questionnaire that allows the user to simply check boxes in the cells. My problem is coming up with a formula to count the number of boxes have been checked. I tried several count formulas without any luck. I think one of the problems is that when I highlight the cells with these check boxes it doesn't actually show in data in the fx line.
What Im trying to do add some addition data to a spreadsheet, I think a userform is the best way to do this. Worksheet = sheet 1 (Current Data)
I have an Item number in column C of sheet 1 (currently 570 items) I have a spot for the values of my checkboxes on sheet1
What I would like is to be able to select the item number from a combo box (cmbITEM) And check off all or some of the checkboxes (I have 12 checkboxes = chk01 through chk12) then have that update the data on sheet1
