Is it possible to print a workbook and have the "track changes on screen" show on the hard copy? I'm using Excel's track changes option to monitor changes to a workbook. I've selected the box "Highlight Changes on Screen". I would like the box containing the change (which pops up when you hover your mouse over the cell) to print out with the workbook so users can see what was changed when reviewing the hard copy. This is preferable to using the "List changes on a new sheet" option since it would require flipping between multiple pages.
how to copy the contents of multiple comment boxes and paste in a single comment box.
The big picture is that I have a number of cells with numerical values in and text in comment boxes. I want to be able to click a button to copy the contents of the comment boxes and paste them, along with the numerical value from the cell, into a single comment box, ordered by highest to lowest value within the comment box, then delete the original cells and comments.
I am quite new to VBA but have been coping quite well so far with information of the web and analysing recorded macros.
This is a repost, I would like to add a comment boxe in multiple sheets (same cell) in a work book. Someone reccomended a macro but then my post was removed.
I am trying to write a VBA macro that will go from one sheet and copy a cell's text, then go back to the main sheet and insert this text into a "comment-box" type of thing.
The box I'm talking about is where you move the mouse over a cell and a box pops up with the comment in it.
Is there an easy way to move a comment box? I have a comment box on a specific cell (hidden until mouse is hovering over it). Each day when new data is filled in, I need to move the comment down to the next cell. Right now, I click on edit comment, copy the comment, then click insert comment in the other cell, paste comment....then delete the old comment. Is there a way to just move the comment down to the next cell?
I have a document with about 300 comment boxes, and I needed to enlarge each one to make the information visibly fit in the region. I did this, and was happy.
Then I opened the file on another computer, added a few rows, saved the file, and re-opened it on this one, and all the comment boxes in the original rows (the 300 i had, not the 15 I added later) had been reduced in size and not all the text is visible. Why did this happen? Is there an easy way to re-size all the boxes without doing them one at a time?
I am trying to combine the text from the comments boxes of a full row of cells into the comments box of a separate other cell in order to provide an overview of the comments in these cells in one place.
I am being asked to create a workbook where 80% of it is protected. And user input is restricted to specific columns and rows.
However the user wants column R unprotected so that Comment boxes can be used, but when I protect the workbooksheet the Insert option is not available when you right click.
The comment boxes keep changing shape and location in my spreadsheet. Some are completely smashed together, while others are extraodinarily wide. I had them all to the right of the cell they applied to; but now they are all over the place.
I have worksheet with 5000 rows data's including the comments in one coloumn.My problem is when I edit the comments,the comment box shows somewhere else is not showing to near the related cell.I am using excel 2007,its happen after the upgradation of 2003 to 2007.
I have a UserForm that I want to use as a “Print Selection Page” using check boxes to make selection or multiple selections of pages to print from different spreadsheets but same work book.
I have a sheet which contains a list of products. I have created a check box next to each name with the linked cell in the adjecent column. I have formatted the cell so you can see the TRUE or FLASE.
I need to be able to select different products and then when I run a macro, it places all of the selected products onto the second sheet. I just need it so it lists the products in column A with no blank rows.
Can this be done using Index/Match? Would a macro which achieves all this be possible?
I am developing a spreadsheet with numerous information on our different suppliers offices in the country for each of our outlets. I am tryin to define a way to do the following:
If a colleague selects a company another list will appear with the region and when the region is selected a list of the offices will appear.
All sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
I am trying to have a file print in legal size if I have 56 lines filled in otherwise print in regular letter size. Does anyone know how to write this in VBA.
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB: Sub Print_All_Worksheets_With_Value_In_A1() Dim Sh As Worksheet Dim Arr() As String Dim N As Integer
Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.
Using Excel 2010: I have 2 rows (A4:J4 & A5:J5) selected as print titles that I would like to be printed at the top of selected pages. Currently, my document is 3 pages long, and I would like to have the print titles only applied to the first 2 pages. More data will be added in the future on pages 1&2 but the last page (whatever page number it ends up being) should not contain the selected print titles.
I just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.
I am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility ' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
I have a pretty large spreadsheet set up that invoices our clients. A few tabs in the front allow us to globally invoice if we did certain services for all clients and then we can also go into each tab and invoice each client for specific services performed on their property. Some invoices are two pages long and other may be up to seven pages long and anywhere in between... So that's the first issue, how do you find how many pages to print and then set the print range for each invoice.
The second issue centers around being able to print all the invoices at one time.
The spreadsheet is set up in this manner: A recap sheet we print to check off that each invoice was printed; an IIF statement to get the Excel info into QuickBooks; a template to set up each invoice's information with dates, dates services were performed,etc.; then there are five Global billing tabs where I can invoice all accounts globally or by their type of account (Saturday or Sunday open, 24/7 etc.); then we get into the tabs for each account. Each account has its own tab with an invoice loaded inside where we can itemize the services they received. Inside all these individual account tabs we have set up 'Zone' tabs where we can invoice all the clients we set up within a zone. There are about twenty of these tabs. Then at the end I have a few more tabs that aren't used any longer, there are about ten tabs there...
Is there a way I can hit Print and get all of my invoices to print out at one time versus having to go into each and every tab, set the print range, and then hit Print for all 250ish invoices?
This is the biggest complaint I have right now about the invoicing program I have set up...
I am trying to come up with a way to print out data that is variable in the amount of rows to print.
1. Cells C1 thru M6 is heading of report 2. Cells C7 thru M400 all have formulas and display information only when criteria in Column C in each row is met, if condition is not met it displays no informtion. (There lies my problem).
I need a way to print out only the area that information is displayed in and skip the areas that are not displayed. (Currently I have hard coded the print range using the largest report)
I have a "submit" button macro which user would click after he has finished his input. This macro would update a reference number on the worksheet named "orange" and then print out this worksheet.
My purpose is "orange" is printed out with a reference number.
So I got this code from http://www.ozgrid.com/VBA/track-changes.htm i followed the directions and pasted it in the workbook module but does not seem to be working. I am thinkning the copy and paste feature is messing something up anyone know what?
I want my worksheet to require validation of entry data before printing, so I decided to use the "Workbook_BeforePrint" event, and display a simple dialog box with an "ok" or a "cancel" button as input options.
The problem is that, as coded, "cancel" button does not cancel the print.
I have a spreadsheet with 28 visible tabs. When I select all tabs and print, I get 3 cover (or banner) pages...I like having the first banner page, but the other two are in the middle of my report. I assume excel is sending 3 print jobs and I'm not sure why.
I've seen a couple of posts regarding this issue when using VBA, but I'm not using VBA...just selecting all the sheets and sending a single print job, but get 3 banner pages.
I have a list of items that I keep track of when they were last used.
For example: Item# Last Used Item#1 8/27/06 Item#2 5/2/07 Item#3 6/30/07
What I would like to do is when I enter a date, it automatically tracks the changes so that I can not only see the most current date but all previous dates if I need to.
The ideal would be to transfer it to another worksheet so that is looks like the original except that is shows multiple dates after it instead of just the most recent.
We have an excel file that I've developed that people in our department are supposed to be using - not that they want to - but it is an edict from our bosses. Is there a way to track who is actually using that file so I can verify that they are using it rather than just relying on them saying that they are?
I have a work sheet that has 113 tabs and I use two macros (both written with help from this forum - thanks), one to protect all of the worksheets and the other one breaks the workbook into 113 separate files. I want to use the tracking feature because I will be sending out these budget templates and want to identify the changes when I receive them back.
Problem is once I enable the tracking I can no longer run my macro’s; I get a VB dialog box with a red X and the number 400. Anyone know how to work around this problem?