Copying And Pasting Cells From A Worksheet Into A List Format In Another Worksheet
May 18, 2006
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
I have a worksheet that gets autofiltered by the user. I need take the unhidden data and copy it to a new worksheet.
Range("H18").Select Dim sh As Worksheet Dim Cell As Range Dim Txt As String For Each Cell In Sheets("Panel Check List").Range("H18:H5000") If Cell.EntireRow.Offset(1, 0).Hidden = False Then Cell.Copy Sheets("Query Results").Range("A6").Select If IsEmpty(ActiveCell.Offset(1, 0)) = True Then ActiveCell.Offset(1, 0).PasteSpecial End If End If Next Cell
I have a consolidation workbook and source files.I would like to convert the data from the source files into a list format in the consolidation workbook.
I have attached a sample of the sheet format of the source files in the attached file, called 'Page 5'. The other 2 sheets are 'Template' and 'Instructions'. The 'Template' sheet is what I imagined would be the list format of the data copied from the 'Page 5' sheet. Instructions is where the lookup table for currency is.
So basically starting from row 8 in 'Template' sheet, I would like to copy and paste from 'Page 5' sheet to 'Template' sheet: - H2 to A8 & B8 - B2 to C8 - According to the list of currency in 'Instructions' sheet, lookup the currency according to operating unit in C8 and paste to D8 - D5-I5 to E8 - row A8-A23 to column F-N
I actually have had a similar problem before, which Derk has helped me here - link: Use Access or XL? (I've decided to start a new thread because this is a more relevant forum).
I have tried to modify the code but I am rather lost as to which part I am supposed to modify.. Note that in this code, the source data is in separate file instead.
Dim wb As Workbook, f As Worksheet, t As Worksheet, j As Integer, k As Integer, n As Integer Dim mty As String, yr As Integer, d As Date, bu As String, cur As String, sTodo As Variant
sTodo = Array("Page 5") 'finish adding the names Application. ScreenUpdating = False Set t = Workbooks("Example1.xls").Worksheets("Template") i = t.Cells(65536, 2).End(xlUp).Row
I am looking to loop through a folder and open every workbook in the folder. For every workbook I would like to copy a range in a worksheet named "explain" and paste values into a separate file. All in all this separate file would be a consolidation of the information from the individual workbooks.
The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.
I have the following simplified example: Table with three columns with a growing number of rows. The user enters data into each row, once user enters the last value and hits "Enter" on the final cell (column c) I want a script to evaluate the row and copy the entire contents of the row onto an existing different worksheet. The first column (A) contains the attribute that will be the condition that determines which sheet to paste in
For example, in my attached file, the first row contains the value "Square". I want that row be copied and pasted into the 2nd tab of the worksheet (reserved for "Square" data) on the next free line. Simiarly, Triangles should be pasted on the thrid tab. Note however that i think the data should be copied line-by-line as the user enters it, which obviously isnt the case for the example dummy data, its just there to simulate my setup
is it possible to copy various cells from one worksheet to another. I have a cover sheet holding various jobs for different individuals, data validation has been used to set up various drop downs for the peoples name etc. On selection of an individuals name i was wondering could various cells on that row be copied into a seperate worksheet with that individuals name being the tab name? I have tried using the " Lookup" function but im not getting too far.
I have a spreadsheet which has a source worksheet, containing 2 columns with thousands of client numbers and account numbers. I have a destination worksheet which contains certain account numbers which are featured in the source sheet.
What I need to do is pull the matching client numbers across from the source sheet into the destination sheet. An example is attached.
I have a list of activities (each activity is one row of data). These will be input manually into Sheet2. (see attached file)
The activities then need to be automatically copied and pasted into Sheet1. However, the data is displayed in a different order than in sheet1. So I need some code which will run through a loop for each row of data and then copy and paste it into sheet1 until it reaches an empty row.
The cell positioning of each data set in sheet1 is equally spaced. VLOOKUP will not work for me here as I do not want any formulae or VBA script in sheet1. I cannot change the format of sheet1 as it is a company form.
I'm trying to "export" data from a static ws "order" (Sheet2) to a selected (active) worksheet. This will happen with 15 different (random) cells.
I got this far but the copying isn't happening from the correct sheet or going to the active sheet. The data in "G5" on "order" should go to the first unused row on the active sheet. What I got was backwards.
Once I get the first one to work I can finish the code for the other 14 cells. I appreciate getting pointed in the right direction
I have a sheet which contains a list of products. I have created a check box next to each name with the linked cell in the adjecent column. I have formatted the cell so you can see the TRUE or FLASE.
I need to be able to select different products and then when I run a macro, it places all of the selected products onto the second sheet. I just need it so it lists the products in column A with no blank rows.
Can this be done using Index/Match? Would a macro which achieves all this be possible?
I have one worksheet from which i need to copy only few columns (Ex column A,B, D,G...need not be in sequence.....) to a new sheet.can you please help me to write a macro for this.In addition: Do we need to specify the number of rows in column or is there any way to get data till the end of column automatically.
what I am looking to do is when in colum AA a cell changes to "Drawdown" I'd like the cells in column A:D,F,H:L,N:Q,S:Z on the same row to grey out and a line to be insert below the cell that was changed, if it selects "Fee" , cells in A:D,F,H:L,N:Q,S:Z on the same row.
I have writen the following butit seems rather cumbersome and I can not get the insert line to work.
Code: Sub Worksheet_Change(ByVal Target As Range) Dim WatchRange As Range Dim IntersectRange As Range Set WatchRange = Range("AA1:AA500") Set IntersectRange = Intersect(Target, WatchRange)
I've attached a sample workbook in which there are 3 macro-buttons.
The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.
Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?
So i have sheet 1 with some cells locked and protected (but open to copying) as a template and sheet two will be where people paste one or more of the template formula on an ongoing basis. How do i mantain the locked and protected cells after they have been pasted? I have unlocked sheet two pasted the first template and had to choose protect cells after pasting, and further pasting of locked cells are not protected.
I need to search column C for the text "X". If an "X" is found, I need to copy the text from the cell directly left of it and paste it into a seperate worksheet into cell B2, then go back to the original worksheet and delete the cell with "X" on it and the cell to the left.
I have productivity data sheet of employees for a month and want to update in a tracker sheet.Every productivity sheet has 5 columns containing numbers.Since its monthly it would be contain 30-31 rows and.I want to copy this data then go to tracker apply filter with respective employee name and paste it there.Is there a way to do this using vba code?
I have prepared vba code to copy paste individual rows from productivity sheet to tracker.But preparing row by row code makes it way too big.Hence i am looking for another solution.
I work in a correctional centre. Some of the correctional officers have little training to use Excel or other programs, but are required to complete spreadsheets on line. Although we have heavily protected the worksheets and locked cells, we find that in some cases the staff can still mess up the worksheets by copying and pasting data inappropriately.
Is there a way to turn off the ability to paste data into the worksheet, and to force each field to be completed manually? This would eliminate the problem.
I have a protected worksheet that from time to time I need to insert a new row and copy a specific range of cells that are with formulae (protected) to the newly inserted row. For a better idea of what I want to achieve, a snapshot of the worksheet is attached.
I would like to insert the new row at row27 downwards each time the macro runs.
I am trying to develop a macro in excel that CUTS AND PASTES rows of data from one worksheet in to the next available row in a new worksheet if there is a date in a particular cell. If the cells that are being checked for a date are empty, then the routine would skip these rows of data.
Here is an example of the worksheet. All rows containing a date in the Scanned column, would be cut and pasted in to a new worksheet. And any rows that have an empty cell in the Scanned column are ignored. If the Scanned column is filled at a later date, then when the macro is run, the data in that row would be cut and pasted in to the next available row in the new worksheet.
I have 10 tabs in a workbook, the first five tab is for 5 Departments for the Month of March, the other 5 is for the same 5 departments for the Month of April.
I want to compare a particular field for each Department for the two months. The field is in column N.
Is there a code that will copy column N for Finance March, Column N for April and paste them into another worksheet in the same workbook in Column A and B, then go to the next department HR and copy Column N for HR March and April and paste in the same worksheet where Finance already as in column D and E, then go to Operations March and April tabs and paste into the same worksheet as column Worksheet G and H.
Basically the copied columns are pasted March April next to each other for all the businesses in the new .
I purchased the book VBA and Macros for excel and it has gotten me pretty far in this code, but I am having difficulty with one code though. I want the Macro to run through a specified directory, and copy the contents of the specified cells (9th row to last row) from each file and paste them in the next available space on my master. Then repeat this process for each file in the file directory. So far, it is successfully going through each file, but it isn't pasting it to my master sheet.
Dim lCount As Long Dim wbResults As Workbook Dim wbCodeBook As Workbook Dim ws As Worksheet Dim NextRow As Long
In column A I have the age of a sale i have completed (compared against todays date) and from B - N of the same row i have the data that coresponds to the sale. As Column A changes daily by 1 i would like to only keep the rows whereby column A is between 1 - 10. For any that are above 10 I would like to cut and paste to a second sheet, strangely entitled "older than 10 days" !
as there are formulas after column N which calculates the data i would only like to cut columns B - N of the specific row.
I think I need to create a macro that first sorts column A so I have the oldest data at the top and then a loop to check if these are above 10, i then want to cut from B - N and paste into another sheet.
I'm having some trouble with copying dates from certain worksheets into new worksheets. When the data is pasted into the new worksheet, the date changes by four years. Somehow, the process of copying and pasting is reducing the serial number by 1462 units (days).
I'm not sure whether this is a bug or a security restriction to prevent copyright breaches. There's a way of getting around it, but I'm curious as to why this is happening. The dates copy and paste correctly into the existing worksheet, but not a new one. An example is attached and the dates are in columns C & D.