Count Columns In Named Range
Nov 22, 2006
Anyone know code to count columns in a named range? Got some code that i want to utilize for multiple things so i cant hard code the column count in anymore.
Dim intColumnCount As Integer
Dim X As Integer
x=0
Range("Poo").select
intColumnCount = magic voodoo code
For Each cell In range("Poo")
x = X+1
If ((x / inColumncont) > 2) And ((x / intColumnCount) <= 3) Then 'if on actual row
If IsDate(Cell) Then ' if there is a date in actual
Cell.Interior.ColorIndex = 15 ' shade actual gray
Cell.Offset(-1, 0).Interior.ColorIndex = 15 ' shade prom gray
Cell.Offset(-2, 0).Interior.ColorIndex = 15 ' shade Sched gray
End If
End If
If x = (intColumnCount*3) Then 'went thru Sched, Prom, & Actual
x = 0 ' Reset x
End If
Next
left off a bunch more if statements that formats other stuff but u get the idea... Need Magic Voodoo code replaced with working code
View 3 Replies
ADVERTISEMENT
Sep 14, 2012
I'd like a formula to count the number of matches between a column and a named range. The named range has six cells. I'd like to return the number of times any cell in the column matches any cell in the range.
View 5 Replies
View Related
Jan 28, 2009
I have a countif formula on another tab collecting data from these cells. I want to define a combined name DecBestFL with cells A1:A14 and G1:G14. Can I do that in Excel 2007?
On the other tab I would use =countif(DecBestFL,G5) G5 = "Y"
View 9 Replies
View Related
Sep 17, 2007
I have a dynamically named range the contents of which I want to clear. However, I also want to clear the cell contents in the next column beside the range. So if my dynamically named range is A20:B40 can I clear the contents of A20:C40 without changing the initially named range. Background: The data I have is the result of an advanced filter. The range is named for printing purposes without the final column.
If I then change one of the raw data I want to run the filter again. To do this I need to clear the first filter.
Range("AIT_Change_Management").ClearContents
View 7 Replies
View Related
Apr 29, 2008
I am trying to hide columns within a named range, where the range corresponds with the values section of a pivot table.
My code hides an unexpected set of columns. It seems to be affecting a different range, depending on the number of columns in the pivot table, which is not part of the named range, as if there was some kind of offset.
Sub hideAll()
With ActiveSheet.Range("wholeyear")
.Range(.Columns(1), .Columns(12)).Hidden = True
End With
End Sub
View 5 Replies
View Related
Mar 17, 2014
I am trying to clean up my code by using named ranges so that it will still work if/when others add columns or rows to the spreadsheet. These should be pretty easy solutions for most of you but I can't seem to find any answers online.
Here are 2 examples of the code I am trying to update:
I was thinking that replacing "A" with "namedRange" would work but I suppose that's not how the Columns application works. How can I modify the code below to work with a named range instead of the fixed column "A"?
[Code].....
For the following I would have thought that replacing "AU" with "namedRange" would do the trick as that's how things have worked for me in the past using the Range application. Unfortunately I get an error when I make the change.
[Code] .....
View 2 Replies
View Related
May 4, 2006
I have a spread sheet that I pull data from different columns on a particular row. The problem is the code I used works great as long as the column never moves from its current location. Is there a way to use a named range to make the following piece of code work, so no matter how many columns are added or deleted the data is pulled correctly?
View 2 Replies
View Related
Aug 16, 2014
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
View 5 Replies
View Related
Jun 23, 2013
I would like to modify my code below to count columns and rows from a different range. Currently, the code below only reads from A1 of my data table. My data table starts at F7 with n columns and y rows. Each time I run the macro it does not recognise the range but only from A1.
How to modify this code to read for a defined range?
VB:
Dim iColumnCount As Integer
Dim lRowCount As Long
Dim iCol As Integer
Dim dAverage As Double
[Code] ......
View 4 Replies
View Related
Jun 2, 2006
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies
View Related
Jul 19, 2013
I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
View 2 Replies
View Related
Jan 30, 2014
I need to be able to count all the blanks in columns other than A but only until the last used cell in column A. I am using a formula right now that counts the blanks in column A until the last used cell but I don't know how to apply the range of column A to other columns like B and C. Here is an example of what I hope to accomplish:
Formula used in A1 that I need applied to other columns but with the range of column A
="Total Blanks: "&COUNTIF(INDEX(A2:A8,MATCH(TRUE,A2:A8<>"",0)):INDEX(A2:A8,MATCH(2,1/(A2:A8<>""))),"")
Here is an example of what B1 and C1, with the formula, would look like if it counted blanks but with the range of column A
Total Blanks: 3
Total Blanks: 6
Total Blanks: 2
[Code].....
View 2 Replies
View Related
Oct 25, 2009
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies
View Related
Mar 14, 2013
Merge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
View 3 Replies
View Related
Sep 4, 2007
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
View 8 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Apr 10, 2013
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
View 1 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Aug 10, 2008
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
View 9 Replies
View Related
Sep 8, 2006
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
View 4 Replies
View Related
Feb 22, 2007
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View 2 Replies
View Related
Aug 25, 2006
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies
View Related
Sep 13, 2007
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
View 9 Replies
View Related
Dec 25, 2008
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies
View Related
Jan 25, 2013
I have a named range, called SubjectNamesPastoral on a worksheet called Worksheets("Group to Teacher")
I can't assign the named range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable in vba.
the first two lines of code work fine, the msgbox shows "E100:E105", happy days!
However when I try to assign the same range to the rngSubjectFamilyRangeOnSubjectUsedSheet variable, the debugger runs past the 'Set' line without error, but throws 'error 91' at the second msgbox.
VB:
thisString = "SubjectNames" & strSubjectFamilyOfGroup
MsgBox Range(thisString).Address
Set rngSubjectFamilyRangeOnSubjectUsedSheet = Worksheets("Group to Teacher").Range(thisString)
View 1 Replies
View Related
May 16, 2014
OK, I have a huge SS with lots of named ranges. Many of which are dynamically assigned lists.
All of the existing ones work fine, but when try to add a new named range, it returns the cells from a previously named range. (Always the same old one.)
example:
A range (one of many) is named "Shift_List" and is defined using
=OFFSET(info!$C$3, 0, 0, COUNTA(info!$C$3:$C$2000),1)
New range is created named "PN_List" and is defines using
=OFFSET(info!AA$3, 0, 0, COUNTA(info!AA$3:AA$2000),1)
When I create a Data Validation List or otherwise use "Shift_List" as the source it works fine.
However if I do the same thing and refer to "PN_List", it returns the items from "Shift_List"
Any new named range returns the Shift_List cells, although older ones still work correctly.
View 8 Replies
View Related
Jul 7, 2014
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
View 1 Replies
View Related
Dec 21, 2006
how to use SUM Formula a column from within a Named Ranges or Dynamic Named Range?
For example, if the range name "MyData" refers to the address: A1:G10, how could I sum all the numbers in column G of that range where column A meets certain criteria.
Eg., Column A holds fruit names:
Apple
Orange
Banana
Apple
and column G holds quantities of the particular fruit. I'd like to sum column G (quantity) for only those quantities that match "Apple" in column A.
View 3 Replies
View Related
Sep 27, 2008
I have a userform that allows users to review, input and edit data on a spreadsheet. (thanks to Leith for getting me started on it a while back)
I want to be able to assign names to columns so that they can be rearanged in the worksheet without interfering with the VBA/macro/userform.
For instance currently the VBA for the row = "R" (equating it to whichever row the form is currently on)
View 11 Replies
View Related