I'd like a formula to count the number of matches between a column and a named range. The named range has six cells. I'd like to return the number of times any cell in the column matches any cell in the range.
View 5 RepliesAnyone know code to count columns in a named range? Got some code that i want to utilize for multiple things so i cant hard code the column count in anymore.
Dim intColumnCount As Integer
Dim X As Integer
x=0
Range("Poo").select
intColumnCount = magic voodoo code
For Each cell In range("Poo")
x = X+1
If ((x / inColumncont) > 2) And ((x / intColumnCount) <= 3) Then 'if on actual row
If IsDate(Cell) Then ' if there is a date in actual
Cell.Interior.ColorIndex = 15 ' shade actual gray
Cell.Offset(-1, 0).Interior.ColorIndex = 15 ' shade prom gray
Cell.Offset(-2, 0).Interior.ColorIndex = 15 ' shade Sched gray
End If
End If
If x = (intColumnCount*3) Then 'went thru Sched, Prom, & Actual
x = 0 ' Reset x
End If
Next
left off a bunch more if statements that formats other stuff but u get the idea... Need Magic Voodoo code replaced with working code
In my spreadsheet, on the first worksheet called "Working". Column A, called "Results", contains carrot ^ delineated string values in each cell (i.e."john^apple^pear^banana^grape^love^heart^pickle"). The majority of string values in every cell in my "Results" column match a "source" column of Pick-List Values, called "Fruits" in the same spreadsheet, however found in a different worksheet called "Lists" (also in Column A). I want to perform 3 functions against my "Results" Column on worksheet "Working":
1.) Report In Column B: Analyze column "Results" by cell and return carrot delineated string values for only those that match my "Fruits" Pick-List
2.) Report In Column C: Analyze column "Results" by cell and return carrot delineated string values for only those do not match my "Fruits" Pick-List
3.) Report In Column D: Identify and return all unique values in "Column C" as a List.
Attached is a simple example of what I'm trying to accomplish called " Sorting.xls"
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
I need a formula that will count the number of pairs of digits in Col H that matches the pairs in Col's E:G....
View 9 Replies View RelatedI'm trying to sift through 10000+ rows of results, and I'd like to know if there's a count formula to determine how many times I have matches in one column (name) and mismatches in another column (ID #)
Profile ID |Name | License #
12345 |Debra Nelson |12345678
12345 |Debra Nelson |23456789
I want to count how many times theres a match in the 1st or 2nd column (profile ID, name - those two columns should match) and a mismatch in the 3rd column (License #). I'm not sure if this can be done with a formula, like a COUNTIF, or not.
I have data (coming straight out of another system, so whilst is seems messy, its the easiest way to have it in Excel).... where there are a number of rows (one for each employee) - then every column represents a date in the month (so there are about 30 columns)....the cells contain a number of hours worked by that employee for that day.
I have figured out how many hours they worked for each day of the week, but my client now wants to know:
for each employee - how many Mondays did they work?- how many Tuesdays? and so on
I am happy to figure out the day of the week for the first date in the month and then manual set up another column heading above the date that tells me what day it is - but I feel that Excel may actually be able to work out what day of the month it is - although the dates come across from the other system as text - April 26, 2006 etc...
So I would like a summary in my sheet that has column headings
Mon, Tues, Wed, Thurs, Fri, Sat, Sun
and then for each row for each employee - I would like the number of days that employee worked for the month by these Days of the Week.
I have looked at Count if - but I need to be able to select the range of cells to count, and also the range of cells to evaluate for the criteria and I cant figure it out!
I am trying to use a "=COUNT(IF(..." formula to count the number of hourly employees that have start dates older than 3 years. Column A has the start dates and column B has the salary status (S/H). =COUNT(IF(AND(A2:A1000<DATE(2004,1,1),B2:B1000="H"),A2:A1000)) This formula returns 1 no matter what I change the data to.
View 3 Replies View Relatedif I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View RelatedMerge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
I want to count the number of times partial text strings occur in a cell adjacent to another cell containing specific text.
A B
FB Milton v Town PHOTO
BS Fairfax v South
BS North v Town
BS Milton v South PHOTO
FB North v Milton PHOTO
FB Milton v South
I'm looking for the number of times "FB" and "Milton" occur in Column A when "PHOTO" also appears in Column B in the same row. From numerous searches I've tried figuring out VLOOKUP, DCOUNTA, etc.
Have numerous values in Col A. Col E extracts a list of unique values from that column.
In Col C, the Col A value has had characters added to it.
Need a formula to count the number of unique values from Col C which contain the same prefix from Col A, and place the result in Col F.
A sample workdook is attached with the desired result shown and highlighted in yellow.
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
I have several worksheets (Labeled Sheet1,Sheet2,sheet3) What I need to do is to step through each row in sheet3, and do a search in sheet1, it the data was found, then return the row number. I then will need to copy data from sheet1 (rowfound columnA , through rowfound CoulmnBd to sheet3 current working row columnK
View 3 Replies View RelatedThe objective of the code is to determine if a value in Column A exists:
- If it does, then copy data from a different worksheet into the row of the worksheet where the value resides
- if it doesnt, then go to the last used row in Column A and add then copy data from a different worksheet into the new row
The portion of the code im having trouble with involves the Finding of the value in Column A, and also the error handling when it doesnt find it.
The code below doesn't handle the error correctly.. for the data set im running the code on, it should find a value in Column A (which it does) but then it also runs the ErrHandler portion..which shouldnt happen.. it should only run the ErrHandler portion if it cant find the value in Column A (which therefore means a new record is required)
Sub UpdateRecords()
Dim fitem As String
Dim nmax As Integer
Dim nRow As Integer
Dim rFoundCell As Range
nRow = 10
nmax = Sheets("Availability").Range("schedulechange").Rows.count
Do While nRow <= nmax ....................
Basically, I have a huge list of addresses with ID numbers, and a list without the ID numbers. An example would be;
2-10 (evens), test road, ID123.
I need to identify if the address is on the street, is in that block of flats (i.e between 2-10, and even number), and then return the ID.
I've already split the number between two cells, but then its all gone a bit wrong.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.
Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.
I've written a Function which will count the number of files in a folder which the modified date equals a fixed date
For example, here, I want the file count which modified date = 01.01.2014
Code:
Function FileCountDate(Path As String, FileType As String) As Long
Dim strTemp As String
Dim lngCount As Long
Application.Volatile
strTemp = Dir(Path & FileType)
Do While strTemp ""
[Code] ......
However I got a #VALUE! error message with this formula:
=FileCountDate("C:Usersjohn.doeDesktopTEST","*")
In the TEST folder there are 4 pdf files so it should return the value of 4.
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies View RelatedI have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.
When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.
How to check if a range of cells matches specific text.
Example:
A1 - dog
B1 - cat
C1 - mouse
I want the formula to give me "yes" if dog is present.
=IF(A1="dog", "yes", "no") is for one cell. However if I do it this way:
=IF(A1:C1="dog", "yes", "no") I get an error.
I can solve my problem with a pivot table, and with VBA easily...however, I'm interested in knowing if this can be done with formulas (array formulas using index/match I'm assuming).
Goal: On sheet1 I have one column with products, then the column next to it will have an "Y" in it if the product is to be selected (blank if not). On sheet2 I want to create a list of the products that were selected (having the "Y"). The only thing stumping me is that I do not want spaces between the product list on sheet2...just a nice continuous list. Example:
Sheet1
cup Y
bowl Y
spoon
fork
knife Y
Sheet2
cup
bowl
knife
..not..
cup
bowl
knife
How do I count unique values in Column A only if the values in Column B match?
A B
1 a
2 a
1 a
4 b
5 b
1 b
The formula would return "2" for "a", and "3" for b. Basically, there are names in column B, and I want to know how many unique things are in column A for each person. If there is a better way than a formula (pivot table?) that would be great - like a table that has each of the names (from Column B) and the number of unique items from Column A next to each unique name.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View Related