Count Unique Values If Adjacent Cell Meets Criteria
Apr 30, 2014
In the picture below, I need a formula in column E to count the unique occurrences in column A (excluding blanks) if its corresponding value in column B (B1 value) matches that in column D (B2 value). Currently column E is showing the values I would want the formula to return.
Capture.PNG
At the moment I have a formula as below:
=SUMPRODUCT(--(B:B=$D2),--(A:A<>""))
this will do a countif in column A if column B matches the value in column D, but would not weed out duplicates for me.
Modifying my formula. I have attached the sample workbook below.
Book1.xlsx
View 7 Replies
ADVERTISEMENT
Nov 6, 2013
I have been using this function to count the number of unique text values in a data set:
=SUM(IF(FREQUENCY(MATCH(B2:B10,B2:B10,0),MATCH(B2:B10,B2:B10,0))>0,1))
It works great if I want to count number of unique text values overall. However, I want to count the occurrences of unique text values if they meet specific criteria. (Like a countifs function would if it could count unique text).
View 7 Replies
View Related
Apr 12, 2012
I am trying to come up with a simple formula to count a single cell if it contains either a 2 or 3.
The cell can contain numbers ranging from 0-8.
Even better would be if I could some how evaluate single cells based on the contents and then count the number of cells where the criteria for contents is true. The problem is the criteria differs from cell to cell (i.e. D2 could = 2 or 3, but E2 needs to be counted only if it contains a 4 or 5).
I know COUNTIFS only evaluate a range but it would be perfect if I could somehow get it to work for single cells. COUNTIFS(D2,2,D2,3,E2,3,E2,4,F2,2)
View 3 Replies
View Related
Jan 14, 2009
We were so close!. But it appears that the assumed correct answer only works if there are no repeating N. The repeating N gets the same count as the last Y and it throws off the sum ....
View 14 Replies
View Related
Oct 27, 2011
I have this formula to give me the number of unique locations and it works fine for cell J1:
=SUM(IF(FREQUENCY(MATCH($B$3:$B$22,$B$3:$B$22,0),MATCH($B$3:$B$22,$B$3:$B$22,0))>0,1))
What I am trying to figure out is how to populate cells N4:N5 and N8:N9 for unique locations by Fruit & Vegtables by Area A and Area B. I just have some basic data for this example as the spreadsheets are 30,000+ lines long.
View 2 Replies
View Related
Oct 31, 2011
I have data in the following type
A Criteria B
A Criteria C Criteria A
C Criteria C
D Criteria 1
2 Criteria 3
Criteria 2
3 Criteria
I need a formula that will count the number of unique values in column A that have "Criteria" in column B. In this case the desired output would be 5 (A, C, D, 2, and 3), a blank cell in column A does not need to be counted.
View 9 Replies
View Related
Feb 19, 2009
I'm facing a big problem and I can't found a solution for days.
I'm trying to count/sum unique values in a Range, base on a criteria excluding Blank cells. Basicly I'm using the Formula Below:
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))
Let me Put to you an example for you been able to understand my problem.
Example considering Range "C2:C20" exluding blank cells
(1) - To count unique values
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))
(2) - To count unique values based on criteria in range "B2:B20"
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E"))
(3) - To sum unique values on "E2:E20" based on same criteria
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E")*(E2:E20))
They all work fine. But I need to insert a merge at Row 10 for
better reading purposes and the (2) and (3) are returning (#DIV/0). The (1) formula still work's.
I just don't know what to do guys ....
View 9 Replies
View Related
Dec 3, 2007
I need to count the amount of Unique codes in column A BUT ONLY if they are still OPEN status. Hopefully the attached example will be explaination enough (I want to automate the RED figure...
View 3 Replies
View Related
Jan 9, 2007
I have a worksheet with two tabs.
First Tab
Account Name
Account Number
Second Tab
Account Name
Account Number
Account Ship Location Number
On the first sheet each account name and number only appears once.
On the second sheet there may be multiple entries for each Account Name and Number.
On the first tab for each row I want to compare the Account Number column to the Account Number column on the second tab. Where I have a match I need to count how many unique Account Ship Location Numbers correspond.
View 9 Replies
View Related
Oct 18, 2012
I am looking for a formula which will allow me to count unique values in a database, based on multiple criteria. Sample file attached (Formula required in cells J and K).
View 6 Replies
View Related
May 22, 2007
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
View 9 Replies
View Related
Jun 4, 2013
I have a worksheet. I would like to count unique number of "Trans" in column A only if value of cells in column B "Type" equals "Return". In example below, I would want to see the value "3" as total.
Trans Type
1 Return
2 Return
2 Return
3 Exch
4 Exch
5 Return
5 Return
View 9 Replies
View Related
Apr 27, 2008
Two Sheets:
1) Top Sheet
2) IRA
- Cells A4:A10 of sheet "Top Sheet" contain dates. i want B4:B10 to show the IRA value as of the date in column A:
____A__________|_B______________________
4 | 09/22/2005 | $ Total as of date in A4
5 | 10/06/2005 | $Total as of date in A5
6 | 10/20/2005 | $Total as of date in A6
7 | 11/03/2005 | $Total as of date in A7
8 | 11/17/2005 | $Total as of date in A8
9 | 12/01/2005 | $Total as of date in A9
10| 12/15/2005 | $Total as of date in A10
- Cells A6:A12 of sheet 'IRA' also contain dates but not in the same sequence (some date ranges had several transactions), B6:B12 of sheet 'IRA' contains the transaction values during the date range:
____A__________|_B______________________
6 | 09/22/2005 | $100
7 | _ _ _ _ _ _| $200.................................
View 4 Replies
View Related
Feb 19, 2014
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
View 7 Replies
View Related
Jan 3, 2008
I have a worksheet with following data in 1 tab.
[TABLE]
Seq Class
SE110
SE270
SE110
SE370
SE310
SE110
SE170
SE370
[/TABLE]
In a different tab I want to calculate the unique count of sequence for a specified class.
In above eg: for class 10 it should return 2
View 3 Replies
View Related
Jul 26, 2013
I have a group of employees who work different divisions and work is not done everyday. I want to count the unique values of a division (only once) per day that the division shows up. Within a week, workers in a division might work 3 days and not other days. I've tried a few array formulas but they count unique within a range and I need the unique value to be based on the selected cell.
Please see attached : Unique Values In Between Dates.xlsx
View 4 Replies
View Related
Aug 8, 2014
Have numerous values in Col A. Col E extracts a list of unique values from that column.
In Col C, the Col A value has had characters added to it.
Need a formula to count the number of unique values from Col C which contain the same prefix from Col A, and place the result in Col F.
A sample workdook is attached with the desired result shown and highlighted in yellow.
View 9 Replies
View Related
Jun 5, 2014
I'm trying to think of a way to do this. I need a unique ID number per company, so I would want it to look something like this:
0001: Apple
0001: Apple
0002: Google
0003: Sony
0003: Sony
0003: Sony
0003: Sony
0004: Ford
0004: Ford
0004: Ford
.....and on and on for about 400+ rows. I think I know how to state the condition. IF B15 =/= B14 then....assign unique ID, else A15 = A14....or something to that effect.
View 1 Replies
View Related
May 12, 2009
i am trying to get my excel formula to say if 2 date ranges in my excel workbook are the same (in seperate worksheets) to put a value from a certain cell into another cell in another worksheet. This is all in the same excel application...
The first step i have taken are:
1) if the 2 date ranges are the same to say 'true' if not 'false'
I am trying to get a forumula to say "if it is true to put a value from a different cell into another cell (both in different worksheets) but the same excel application...? but if its false to move on to the next date
View 9 Replies
View Related
Aug 24, 2009
If I have multiple entries with different but repeatable text values in one column - how do I count all unique ones ? Is there a function or does it have to be a pivot table of sth ?
View 14 Replies
View Related
Feb 18, 2014
I'm using the following on the Worksheet_Activate event to update rows with the date, (Cell AD1 contains the current date):
Code:
Range("X2:X2000").Formula = "=IF(IF(ISBLANK(W2),,$AD$1)=0,"""",IF(ISBLANK(W2),,$AD$1))"
Is there a way I can amend it so it only updates those cells which currently have no data?
At the moment it is changing every cell with the date which overwrites existing dates - I want it to update the new stuff only.
View 3 Replies
View Related
Mar 5, 2014
Say I have a column of cells filled with numbers that are ascending. What I would like to do is to pick out the first cell that meets my condition. For instance, these cells contain irrational numbers that increase from 0 to 100. I would like a formula to pick out the first cell that exceeds 10.2, and to return the row number of that cell.
In the case of descending numbers, if I would like to pick out the first cell that goes below 10.2, would the formula be the same?
View 3 Replies
View Related
May 21, 2008
I want to scan all sheets in a workbook and to delete a first row where a value in cell(1,1) is "table".
Sub DeleteFirstRowInWorksheet()
Dim SheetName As Worksheet
Dim i As Integer
For Each SheetName In Sheets
If Range("A1") = "table" Then
Rows("1:1").Select
Selection.Delete Shift:=xlUp
End If
Next SheetName
End Sub
It delete only in an active sheet. What's wrong?
View 5 Replies
View Related
Jun 23, 2008
I want to count no of "yes" in Range Column B only if corresponding values in column A is less than 10/06/2008
Please see the attached file for refrence
View 5 Replies
View Related
Nov 21, 2007
Iīm trying to do a macro that changes the color of all fonts in a row if the cell in the column "R" has the date lower than a specific one, something like this:
Dim Data2 As Date
Data2 = Sheets("Sheet1").Range("today")
Range("R12").Select
Do While ActiveCell <> ""
If ActiveCell < Data2 Then
ActiveCell.EntireRow.Select
Selection.Font.ColorIndex = 3
Else
ActiveCell.Offset(1, 0).Activate
End If
Loop
But it just donīt work. The macro does that in the first row, than it stops. Do you have another code for this, or another way to do?
View 7 Replies
View Related
Apr 5, 2014
What I would like to do is return the total qty of items on the 'QUOTATION' tab that are upholstery and this having been determined by whether there is a Y (for Yes) or N (for No) against the equivalent item in the 'BASIC_LIST' tab.
So in the below example, the total of Upholstered items would be 182 as items 'ST-11' to 'ST-13A - Tray' do not have a 'Y' against the matching item references in the 'BASIC_LIST' tab.
I would like this Y/N column to be the determining factor as opposed to any other criteria or filtering. (Also the Items column in the 'QUOTATION' tab is only ordered in the way it is for ease of view for this query!)
Picture 2.png Picture 3.png
SUM VALUES OF ITEMS THAT HAVE ALREADY MATCHED ANOTHER CRITERIA.xlsx
View 4 Replies
View Related
Jul 17, 2013
I'm attempting to clear the contents from a range of cells on rows where a cell string may equal R, X, XX, Y, Z, ZX, #N/A.
The macro runs fine until it gets to a cell that contains #N/A. How to get this to work?
Sub Recalculate()
Dim r As Integer
r = ActiveSheet.UsedRange.Rows.Count
Application.ScreenUpdating = False
For Row = 13 To r
[Code] ........
View 2 Replies
View Related
Jun 1, 2007
I am trying to use the DCOUNT function to count based on two different criteria in adjacent columns is this applicable.
Situation:
I have column B that contains initials and I have column C that contains a type (of store) so it'd look like this
jp RET
jp RTO
jb RET
ma RTO
Rn CI
ma Fur
tc CI
ma RET
jp RET
and I want to have a count of how many RET's there are for Initials JP ect
View 6 Replies
View Related
Apr 5, 2009
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
View 2 Replies
View Related
Jan 20, 2014
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Book1.xlsx
View 2 Replies
View Related
