Sum Cells Until Adjacent Cell Meets Date Condition
Apr 27, 2008
Two Sheets:
1) Top Sheet
2) IRA
- Cells A4:A10 of sheet "Top Sheet" contain dates. i want B4:B10 to show the IRA value as of the date in column A:
____A__________|_B______________________
4 | 09/22/2005 | $ Total as of date in A4
5 | 10/06/2005 | $Total as of date in A5
6 | 10/20/2005 | $Total as of date in A6
7 | 11/03/2005 | $Total as of date in A7
8 | 11/17/2005 | $Total as of date in A8
9 | 12/01/2005 | $Total as of date in A9
10| 12/15/2005 | $Total as of date in A10
- Cells A6:A12 of sheet 'IRA' also contain dates but not in the same sequence (some date ranges had several transactions), B6:B12 of sheet 'IRA' contains the transaction values during the date range:
____A__________|_B______________________
6 | 09/22/2005 | $100
7 | _ _ _ _ _ _| $200.................................
View 4 Replies
ADVERTISEMENT
Jul 31, 2008
I have 2 sheets, sheet1 and sheet2. On sheet1 I have a cell (w,3) which displays either "OK" or "Needed". It will be like this for every row on the sheet. On sheet2 I have more information. I have been trying to create a macro or VB function that everytime the workbook is opened will scan the entire column W for any that say "needed" and if/when one is found copy the data in the cell in column A of the same row from sheet1 to column A of the first blank row in sheet2.
So say cell w,6 displays "needed", I then want to have cell a,6 copied from sheet1 to sheet2 into the first column A that is blank. I don't really care if when w,6 changes to "OK" it removes the entry on sheet2 or not, in fact if it does that would be great.
Here is the code that seems to be not so complicated and has copied information from one sheet to another, can't get it to work consistantly. I copied it off a similar post on this site and am not sure what the last value = "1" is doing but I doubt its helping my cause. The cell I need to trigger the action is in the 23 column, the cell I need copied is always in the first and the cell I need it to be copied into on the 2nd sheet is always in the first column as well. I'm pretty good with regular logical statements but I feel that a lack of knowledge about all the available commands is really whats hurting me on this....
View 9 Replies
View Related
Jun 19, 2008
I have a spreadsheet with about 225 sheets or so containing data. The date is in column J. I am needing to delete all the Rows that have a date greater than or equal to 06/06/08 and loop through all of the sheets.
I recorded a macro to find the date 6/6/2008, then highlight the row, then select the next 450 rows and delete them and it worked ok, but I don't know how to get it to loop through the sheets to the end.
View 2 Replies
View Related
Nov 21, 2007
Iīm trying to do a macro that changes the color of all fonts in a row if the cell in the column "R" has the date lower than a specific one, something like this:
Dim Data2 As Date
Data2 = Sheets("Sheet1").Range("today")
Range("R12").Select
Do While ActiveCell <> ""
If ActiveCell < Data2 Then
ActiveCell.EntireRow.Select
Selection.Font.ColorIndex = 3
Else
ActiveCell.Offset(1, 0).Activate
End If
Loop
But it just donīt work. The macro does that in the first row, than it stops. Do you have another code for this, or another way to do?
View 7 Replies
View Related
Apr 30, 2014
In the picture below, I need a formula in column E to count the unique occurrences in column A (excluding blanks) if its corresponding value in column B (B1 value) matches that in column D (B2 value). Currently column E is showing the values I would want the formula to return.
Capture.PNG
At the moment I have a formula as below:
=SUMPRODUCT(--(B:B=$D2),--(A:A<>""))
this will do a countif in column A if column B matches the value in column D, but would not weed out duplicates for me.
Modifying my formula. I have attached the sample workbook below.
Book1.xlsx
View 7 Replies
View Related
Feb 19, 2014
Basically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
View 7 Replies
View Related
Aug 4, 2007
I currently have a report that I have code on that will change the color of a cell based on whats in the cell.( Code posted below) However I also need to look at $J and if the first letter of the value in that column is a "z" then I would like to change that whole row to icolor 13 (purple).
For example J14 might be "Z-Thomas". if it does I would like that row 14 to change to purple.
Also I would prefer that the solution be in VB, so that we do not have to do something in VB with the fix below AND do something in Conditional Formatting.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("$A:$E")) Is Nothing Then
Select Case Target
Case "y", "Y"
icolor = 4
Case "n", "N"
icolor = 3
Case "?"
icolor = 6
View 9 Replies
View Related
Sep 28, 2007
I'm setting up a spreadsheet for work and i have a question. I'm not familiar with the formulas. If i want to set up a formula to where if i type "complete" in the cell it will move the entire row over to the next sheet.
View 2 Replies
View Related
Oct 19, 2007
I have 5 cells on a sheet. When one has an X in it the other 4 go blank. It so I can keep track of who has ownership of a job.
View 6 Replies
View Related
Jan 15, 2014
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
View 7 Replies
View Related
Sep 12, 2007
I am currently doing a spreadsheet and require cells in column f (which have monetry values entered) to colour in different colours depending on whether there is a yes or no value in column e.
View 2 Replies
View Related
Nov 23, 2006
How do I define two adjacent cells as a condition to be found in other adjacent rows. E.g. if the value A1=X and the value B1=Y, how do i perform the action that's seeking for X in K1 and Y in L1 at the same time. Subsequently, I'd like to display the X and the Y behind as they are displayed in the original A1-A2.
View 9 Replies
View Related
May 8, 2008
I am attaching a sheet in which Data can be entered in cells C5 & D5 in "Calculation " sheet, depending upon the value of C5 it will count all the Occurrence of data of D5 in adjacent cell i.e. (one up & and one below of data of C5) . data will search in "PCM_PLAN" sheet in column " I ".
count will be given in E5 in "calculation sheet"
View 9 Replies
View Related
Jul 25, 2012
I'd like to sum a range of cells if the date in the adjacent cell is last month, so... A2:A1000 holds the dates and B2:B1000 holds the values, i'm trying to figure out how to sum all of the values for the previous month (i.e. June).
View 7 Replies
View Related
Jul 22, 2008
I have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
View 14 Replies
View Related
Mar 24, 2013
formula to find the last number in a cell and if that number meets a condition put a letter in the adjacent cell.
In cell A1 I have numbers as such 254671 (these numbers vary in length but not normally more than 8 in length). I want to know if the last numeral on the right is a 1 and if so then enter in the adjacent cell (B1) the letter y if not then leave blank.
View 6 Replies
View Related
Jan 21, 2008
I'm trying to Multi-Select rows in order to format all rows, in "One Step" if the cell in col. "A" = 1. I managed to write the hereunder code but I'm still frastrating because I don't like the first RNG setting command. How can I avoid declaring RNG as row(1) and still be able to run the code. I assume I need some other Range set for RNG which, unfortunately, I could'nt find and the command I used includes row1 in RNG although cell A1 = 5.
Sub Conditional_Multi_Rows_Select()
Set RNG = Rows(1) ' this is my problem
LR = [A65536].End(xlUp).Row
For R = 1 To LR
If Cells(R, 1) = 1 Then
Cells(R, 1).EntireRow.Select
Set RNG = Union(RNG, Selection)
End If
Next
RNG.Select
Selection.Font.Bold = True
Selection.Font.ColorIndex = 3
End Sub
I had in mind to use:
Set RNG = Rows(65536)
but this will not make it a "neat" vba code, either.
View 9 Replies
View Related
Oct 21, 2008
I have a userform that should open a file and then figure out if a integer meets a condition. All this works.
My problem is that i want to run another sub from this userform after the file is open(this will be the active file).
View 9 Replies
View Related
Jan 14, 2009
We were so close!. But it appears that the assumed correct answer only works if there are no repeating N. The repeating N gets the same count as the last Y and it throws off the sum ....
View 14 Replies
View Related
Apr 5, 2009
I have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
View 2 Replies
View Related
Nov 17, 2009
I have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
View 4 Replies
View Related
Jun 23, 2008
I want to count no of "yes" in Range Column B only if corresponding values in column A is less than 10/06/2008
Please see the attached file for refrence
View 5 Replies
View Related
Mar 9, 2007
I am trying to make a simple program that will go down column A deleting the rows until it meets a cell with the word "Date" in the A column. When it has found that row I want it to delete that row also and then stop.
This is what I have so far
Sub FindAndDelete()
Dim row As Integer
Dim col As Integer
ActiveSheet.Range("a1").Select
If Range("a1") "date" Then Rows("1:1").Select
Selection.Delete
End Sub
I tried defining row =1
col = 1
and then going if range ("rowcol") but no joy.
View 9 Replies
View Related
Feb 2, 2014
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
View 3 Replies
View Related
Feb 19, 2008
I have data in 37 sets of 6 columns and on several rows (that increase in number depending on my needs). Rows 1 to 3 are information headers.
For each row, starting on row 4, I would like to sum the cells that are on the 4th column of every set, providing that the info in the 1st row & 2nd column of each set equals either "USD", "EUR" or "GBP". If one of the above conditions is met but the cell is empty (shows "#value!"), I do not want it to be taken into account.
View 11 Replies
View Related
May 2, 2014
column 1 is vouchers
column 2 is date
vouchers column is populated with a voucher code for every date date column is populated with dates beginning with today, ending with the last day of the year.
I would like to create a function that evaluates the date file, If date = today's date, return value in the adjacent vouchers column.
View 1 Replies
View Related
Oct 31, 2006
Is there a really easy code which will insert the current users ID into a cell adacent to the one previously completed automatically? For example if a date was entered in A2, then B2 would automatically be completed with the user identity?
View 7 Replies
View Related
Feb 28, 2008
formula to auto input the date into a specific cell once one cell has been changed
View 6 Replies
View Related
Jan 23, 2014
I have a formula in my spreadsheet that shows dates for servicing of products. Column F show's Date Last Serviced and the adjacent column (G) then shows Date Next Service. When there is nothing on the F column's cell then the date that appears on my spreadsheet is 31/12/00. It looks messy and I would rather have a formula to make it so that if the F column is blank, then the adjacent cell in G column should stay blank also.
To automatically calculate the next service due date, I have variants of this formula that creates the dates in G column:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))
I tried adding as an extra part, for example:
=DATE(YEAR(F4)+1,MONTH(F4),DAY(F4))&If(F4 = 0, "", F4)
It always brings back the answer of 366, and does not make the cell blank...
View 2 Replies
View Related
Jun 21, 2009
I have this userform:
DATE : [TextBox1] WITHDRAWAL: [TextBox2]
[Commandbutton1]
In my sheet I have a list of all the days in a year in the cell range of AJ12:AJ376.
Basically I want to find the date in Textbox1 within the range of AJ12:AJ376 and enter the value of Textbox2 in a adjacent cell. The adjacent cell would be in column AT. This would be achieved hopefully via a code using the commandbutton.
View 9 Replies
View Related
