Counting BlackCircle Unicode Symbols
Feb 18, 2009
I use dot symbols in one column of my spreadsheet to call attention to a particular row. I am currently using ASCII(decimal) Char 149 and I count the column of dots with the following formula: =COUNTIF(A1:A20,CHAR(149))
This works fine, however, ASCII(decimal) Char 149 is a very small dot which is hard to see. I have found a much larger dot which is identified as BlackCircle Unicode(hex) 25CF. From an appearance standpoint the BlackCircle is much larger and much easier to see, however, I have been unable to construct a formula which will count the dots. How do I identify BlackCircle Unicode(hex) 25CF in order to count the character using the formula listed below: =COUNTIF(A165:A184,CHAR(25CF))
View 2 Replies
ADVERTISEMENT
May 8, 2009
Counting with text and symbols mixed in. This is what I'm wanting to do:
For example:
View 5 Replies
View Related
Aug 1, 2009
Lotus 123 had a function where you could graphically, in a cell, show plus symbols(+) or negative symbols (-) for the value of the data. For example if you had a column of numbers that you calculated from the previous year that indicate the change, Lotus, in the next cell would allow you to graphically display the symbols that indicate the strength of the change. So if your result was a positive ten then ten plus symbols would be shown. If it was -20 then 20 negative symbols would be shown. Now the numbers I am looking at could be 600,00 and I believe there was a way to to proportion the symbols for example for every 100,000 put in one symbol so the result would be 6 (+) signs.
View 5 Replies
View Related
Jul 7, 2012
I have written code to export data from excel as a unicode .csv file - see [URL] .....
However I now want to open that file by vba, yet it does not format the data correctly. I have a field in the delimited data that is string (in my .csv file strings are surrounded by " to indicate strings). This string can contain a vbLf as part of the string ie. the string goes over a couple of lines in one cell.
Using vba I open the .csv file as follows:
Code:
Workbooks.OpenText filename:=singlefname, origin:=65001, DataType:=xlDelimited, textqualifier:=xlTextQualifierDoubleQuote, comma:=True
yet when the code opens the file the vbLf starts a new worksheet row messing up the layout of the .csv file. It should just indicate a new line in a cell.
How to open the file so the vbLf only creates new line in the cell does not start a new worksheet row?
View 8 Replies
View Related
Oct 11, 2008
In my excel file I have chinese and some other special characters and many cells have text with commas.
My problem starts when I try to save my file as a Text.
When I Save As with the Unicode option I can see the chinese characters in my text file but also I see a lot of quotes """ because I have commas in my xls file.
When I Save As with Tab Delimited option to solve the comma problem, the chinese characters become?
It seems that cannot be possible to do it manually cause there is no option to Save As with Unicode and Tab option together.
So I would deeply appreciate someone could give me a solution with VBA code to save my file as Text with Unicode and Tab Delimited option.
View 9 Replies
View Related
Mar 30, 2014
The following macro works:
Code:
Range("b42").Resize(, Len(Range("A42").Value)) = split(StrConv(Range("A42").Value, vbUnicode), Chr(0))
I tried to revise the macro so that instead of 'b42' it's activecell.
Code:
Dim b As Range
Set b = ActiveCell
Range(b).Resize(, Len(Range(b).Value)) = split(StrConv(Range(b).Value, vbUnicode), Chr(0))
My code isn't working.
View 2 Replies
View Related
Oct 16, 2009
Does such function exist in Excel?
View 9 Replies
View Related
Apr 19, 2014
In Excel 2013, how do I translate all characters of selected cells to Unicode?
There is a formula to translate the first character into Unicode [=UNICODE(text)] and that formula would have worked fine for me .Only if it could translate all the characters to Unicode not just the first one.
View 1 Replies
View Related
Apr 19, 2014
In Excel 2013, how do I translate all characters of selected cells to Unicode? There is a formula to translate the first character into Unicode [=UNICODE(text)] and that formula would have worked fine for me .Only if it could translate all the characters to Unicode not just the first one.
View 10 Replies
View Related
Jan 14, 2011
what format is used when you save an excel file as "unicode." I am using excel 2002 on XP.
I have been asked to provide a UTF-8 formatted unicode file for use by another program but I am not sure which formatting excel uses.
View 3 Replies
View Related
Oct 10, 2007
When I copy from Excel 2003 (values & formulas) and paste special into Excel 2007 i get the option screen to select unicode text,sylk etc instead of the other screen with the option of values,formulas,formats etc.How can I select the option for value,formulas?
Sorry cannot attach a screen shot as it is above the allowed limit.
View 9 Replies
View Related
Jul 30, 2012
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
View 1 Replies
View Related
Apr 23, 2014
I use an excel spreadsheet alot for billing in the construction industry. There are premade formulas in this spreadsheet. When no input value is present, the total column(s) either show a "$0.00" or show "#DIV/0!". How do I hide these results for the rows that do not yet have any input? I have seen it done on other speadsheets
View 3 Replies
View Related
Mar 14, 2007
I need to display the currency symbols for all European & Asia Pacific countries. The only ones available that I could find in excel help are , , . Does anyone know if there are more available? This seems limiting.
View 9 Replies
View Related
Jun 17, 2008
I have lists of phone numbers with parenthases and hyphens. like (555) 333-4444
I would like to remove all symbols and leave just the numbers.
I would alsolike to add the number 1 in the first position.
so (555)333-4444 would end up 15553334444
View 9 Replies
View Related
Jun 4, 2009
is there a way to use the "1/4" symbol as 0.25 in a calculation?
View 9 Replies
View Related
May 17, 2014
I've got a workbook with multiple formulas e.g.:
t=S/D
TCh=Ch*(S^2/2D)*(D/Q)
TC=Co*(D/Q)+Ch*((i-D)/2i)*Q
which are built by implementing the symbols:
t, S, D, TCh, Ch, Q, TC, Co, i
I'd like to substitute the symbols in following sequence:
t = a
S = b
D = c
TCh = d
Ch = e
Q = f
TC = g
Co = h
i = x
Questions:
1) Which formula could substitute the symbols automaticly?
2) If there are up to 100 formulas in the workbook in the range of A1:E100,-
would it be possible to to set the substitution for the mentioned range?
See the attachment.
View 5 Replies
View Related
May 8, 2009
I have a column with e mail addresses that all have > < this symbols in the beginning and at the end, how can I remove them from the column?
example
<Ana.Gomez@taca.com>
View 6 Replies
View Related
Sep 18, 2009
Im looking for a formula to count different symbols in a row. I am using =COUNTIF(A1:A1600,CHAR(251)) to count 1 symbol and =COUNTIF(A1:A1600,CHAR(252)) to count another. what i need is a formula to count all symbols no matter what they are. As in this case they will only be the 251 + 252 a formula just for that would be great.
View 4 Replies
View Related
Oct 27, 2009
I have a worksheet with what appears to be symbols or text boxes; squares, some with a check mark in them, some without. cannot select any of them to edit or delete them, I can type in the cell behind the symbol, the symbol hides the text. I can copy and paste them, but not delete them. how to identify them to edit and/or delete them. Password protection and all cells are unlocked as well. I have stumped as well as other forums.
View 4 Replies
View Related
Feb 4, 2010
Can i find a list anywhere of the new Excel 2007 ALT numbers to give the symbols eg Alt0186 = the degrees symbol in 03 but doesnt work in 07?
View 10 Replies
View Related
Jan 8, 2012
I need to delete cells that contain certain characters (symbols) and space. Say I have some columns/rows like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box Text Box Power Power Place Nice Nice.Plus Jump Jump Over High (Jump) Car Black Car Green.Car Car's Color Cars Blue Color Green Red (Color) Black White
And now I need to have cell without those contain symbols or space or character like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box
Power
Nice
Jump
[Code]....
View 7 Replies
View Related
Jan 28, 2012
VBA code for inserting "X" for wrong and Tick mark symbol for completed items.
View 5 Replies
View Related
May 8, 2013
I am importing content control information in a word file into excel by using a macro in excel. The information is coming across nicely but when the information about a checkbox comes across, in excel, that's what you see, a checkbox (☐ or ☒). Is there any way (formula or vba) to replace all the checkboxes with a yes or a no?
I wrote a formula that works:
Code:
=IF(G8="☒","YeS","nO")
But this will add this information to a new column and I would like to replace the information in the existing column (the form has about 200 checkboxes) and I don't want to add a bunch of new columns.
I also toyed with VBA:
Code:
Range("G1:G100").Replace "&", "No"
But when I try to paste the ☐ in the vba code, I get a "?" so I am assuming it doesn't recognize the ☐ as a valid character.
View 6 Replies
View Related
Jan 9, 2014
This is my qns
cell A1 having <txt>NEWM</txt>
cell A2 having <txt>RSQ</txt>
I need to display NEWM in B1 and RSQ in B2....
View 2 Replies
View Related
Oct 21, 2008
way to convert all symbols ( ) to their equvilant letters (u a) I know that I can do this manualuy with Find replace but I was hoping there was some magic that I am missing.
Please note that the exapples are only 2 of the symbols I need to convert the sheet could contain all of the varieties of symbol.
View 9 Replies
View Related
Jan 13, 2009
I have a spreadsheet that creates a named file using data entered into a field. For a hypothetical example, people can put their favorite car in A2 and, when the macro is run, it will SAVE AS the spreadsheet and name it with the value of A2. Problem is, some folks don't follow instructions and do things like HONDA / INSIGHT, or else something using symbols that are not valid for file names.
I know there are lots of ways to use Data Validation to prevent certain entries, but is there any way to prevent certain symbols? If not, can anyone help me with an Event Handler that would evaluate the data for certain symbols once the data is entered?
View 9 Replies
View Related
Jun 9, 2009
I have created a survey on excel. When completing the survey, the customer will have to place an "X" in the appropriate column (very satisfied, satisfied, dissatisfied, etc.) Is there a formula in excel that will allow me to add the number of responses ("X's") for Very Satisfied, Satisfied, etc.???
View 9 Replies
View Related
Jun 17, 2006
Could anyone guide me how to express symbols & signs in VBA , LIKE ....
View 6 Replies
View Related
Aug 20, 2006
some times we use numeric symbols with formulas such as subtotal(109,a1:a100)
109 here meaning the visible cells only. well, Iwant to know if other numeric symbols also used in formulas !
View 3 Replies
View Related
