Im looking for a formula to count different symbols in a row. I am using =COUNTIF(A1:A1600,CHAR(251)) to count 1 symbol and =COUNTIF(A1:A1600,CHAR(252)) to count another. what i need is a formula to count all symbols no matter what they are. As in this case they will only be the 251 + 252 a formula just for that would be great.
View 4 RepliesLotus 123 had a function where you could graphically, in a cell, show plus symbols(+) or negative symbols (-) for the value of the data. For example if you had a column of numbers that you calculated from the previous year that indicate the change, Lotus, in the next cell would allow you to graphically display the symbols that indicate the strength of the change. So if your result was a positive ten then ten plus symbols would be shown. If it was -20 then 20 negative symbols would be shown. Now the numbers I am looking at could be 600,00 and I believe there was a way to to proportion the symbols for example for every 100,000 put in one symbol so the result would be 6 (+) signs.
View 5 Replies View RelatedI've got a workbook with multiple formulas e.g.:
t=S/D
TCh=Ch*(S^2/2D)*(D/Q)
TC=Co*(D/Q)+Ch*((i-D)/2i)*Q
which are built by implementing the symbols:
t, S, D, TCh, Ch, Q, TC, Co, i
I'd like to substitute the symbols in following sequence:
t = a
S = b
D = c
TCh = d
Ch = e
Q = f
TC = g
Co = h
i = x
Questions:
1) Which formula could substitute the symbols automaticly?
2) If there are up to 100 formulas in the workbook in the range of A1:E100,-
would it be possible to to set the substitution for the mentioned range?
See the attachment.
I have created a survey on excel. When completing the survey, the customer will have to place an "X" in the appropriate column (very satisfied, satisfied, dissatisfied, etc.) Is there a formula in excel that will allow me to add the number of responses ("X's") for Very Satisfied, Satisfied, etc.???
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedI am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedI have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View 2 Replies View RelatedI have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.
View 4 Replies View Relatedin writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).
On the table listed below I will return the data using a match.
From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed
To this table
A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43
I use an excel spreadsheet alot for billing in the construction industry. There are premade formulas in this spreadsheet. When no input value is present, the total column(s) either show a "$0.00" or show "#DIV/0!". How do I hide these results for the rows that do not yet have any input? I have seen it done on other speadsheets
View 3 Replies View RelatedI need to display the currency symbols for all European & Asia Pacific countries. The only ones available that I could find in excel help are , , . Does anyone know if there are more available? This seems limiting.
View 9 Replies View RelatedI have lists of phone numbers with parenthases and hyphens. like (555) 333-4444
I would like to remove all symbols and leave just the numbers.
I would alsolike to add the number 1 in the first position.
so (555)333-4444 would end up 15553334444
is there a way to use the "1/4" symbol as 0.25 in a calculation?
View 9 Replies View RelatedI have a column with e mail addresses that all have > < this symbols in the beginning and at the end, how can I remove them from the column?
example
<Ana.Gomez@taca.com>
I have a worksheet with what appears to be symbols or text boxes; squares, some with a check mark in them, some without. cannot select any of them to edit or delete them, I can type in the cell behind the symbol, the symbol hides the text. I can copy and paste them, but not delete them. how to identify them to edit and/or delete them. Password protection and all cells are unlocked as well. I have stumped as well as other forums.
View 4 Replies View RelatedCan i find a list anywhere of the new Excel 2007 ALT numbers to give the symbols eg Alt0186 = the degrees symbol in 03 but doesnt work in 07?
View 10 Replies View RelatedI need to delete cells that contain certain characters (symbols) and space. Say I have some columns/rows like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box Text Box Power Power Place Nice Nice.Plus Jump Jump Over High (Jump) Car Black Car Green.Car Car's Color Cars Blue Color Green Red (Color) Black White
And now I need to have cell without those contain symbols or space or character like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box
Power
Nice
Jump
[Code]....
VBA code for inserting "X" for wrong and Tick mark symbol for completed items.
View 5 Replies View RelatedI am importing content control information in a word file into excel by using a macro in excel. The information is coming across nicely but when the information about a checkbox comes across, in excel, that's what you see, a checkbox (☐ or ☒). Is there any way (formula or vba) to replace all the checkboxes with a yes or a no?
I wrote a formula that works:
Code:
=IF(G8="☒","YeS","nO")
But this will add this information to a new column and I would like to replace the information in the existing column (the form has about 200 checkboxes) and I don't want to add a bunch of new columns.
I also toyed with VBA:
Code:
Range("G1:G100").Replace "&", "No"
But when I try to paste the ☐ in the vba code, I get a "?" so I am assuming it doesn't recognize the ☐ as a valid character.
This is my qns
cell A1 having <txt>NEWM</txt>
cell A2 having <txt>RSQ</txt>
I need to display NEWM in B1 and RSQ in B2....
way to convert all symbols ( ) to their equvilant letters (u a) I know that I can do this manualuy with Find replace but I was hoping there was some magic that I am missing.
Please note that the exapples are only 2 of the symbols I need to convert the sheet could contain all of the varieties of symbol.
I have a spreadsheet that creates a named file using data entered into a field. For a hypothetical example, people can put their favorite car in A2 and, when the macro is run, it will SAVE AS the spreadsheet and name it with the value of A2. Problem is, some folks don't follow instructions and do things like HONDA / INSIGHT, or else something using symbols that are not valid for file names.
I know there are lots of ways to use Data Validation to prevent certain entries, but is there any way to prevent certain symbols? If not, can anyone help me with an Event Handler that would evaluate the data for certain symbols once the data is entered?
Could anyone guide me how to express symbols & signs in VBA , LIKE ....
View 6 Replies View Relatedsome times we use numeric symbols with formulas such as subtotal(109,a1:a100)
109 here meaning the visible cells only. well, Iwant to know if other numeric symbols also used in formulas !
I am trying to write some code that will repair errors in a standard workbook. One of the errors is a blank cell that needs to be changed to "325F T 350F". How do I insert these symbols/operators into the VBA code?
View 6 Replies View RelatedI use dot symbols in one column of my spreadsheet to call attention to a particular row. I am currently using ASCII(decimal) Char 149 and I count the column of dots with the following formula: =COUNTIF(A1:A20,CHAR(149))
This works fine, however, ASCII(decimal) Char 149 is a very small dot which is hard to see. I have found a much larger dot which is identified as BlackCircle Unicode(hex) 25CF. From an appearance standpoint the BlackCircle is much larger and much easier to see, however, I have been unable to construct a formula which will count the dots. How do I identify BlackCircle Unicode(hex) 25CF in order to count the character using the formula listed below: =COUNTIF(A165:A184,CHAR(25CF))
Counting with text and symbols mixed in. This is what I'm wanting to do:
For example: