Counting Merged Area?
Jul 21, 2014I have a sheet with many merged cells.how is it possible to count the merged area and display the unique values in each area?
View 8 Replies
ADVERTISEMENT
Counting Merged Cells As Multiple Values
Aug 15, 2014I have a spreadsheet, similar to the one attached, that monitors deliveries. The reasons for deliveries not being made on time are merged across to have one reason per delivery vehicle.
I am trying to count the number of times a reason occurs, but utilizing a COUNTIF function it will only count a merged cell as one count, rather than per each delivery.
Merged Count if examples.xlsx‎
Adding Column Widths Of Merged Area To Match Single Column Width
Sep 19, 2012I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
Print 2 Selected Area (highlighted Area)?
Apr 11, 2013How can I print 2 selected area (highlighted area). I know there is a trick to do that. Right now I can only select (highlight) one area to print, but would like to know how to print 2 or more areas at same time
View 7 Replies View RelatedProgrammable Print Area: Macro To Set The Print Area According To The Amount Of Data In A Particular Range Of Cells
Feb 25, 2009Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View RelatedGraph The Following Data In An Area Chart With Line Charts Superimposed On The Area Chart
Nov 1, 2006I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
Copy Merged Cell, Paste As Merged Cell
Dec 17, 2009I have a macro to copy a merged cell from one sheet and paste it to another as a merged cell. Basically, I want to copy it AS IT IS and paste it AS IT IS. My code is below.
View 4 Replies View RelatedHow To Set Fixed Print Area In Excel So Cells Within Print Area Can Still Be Modified
Feb 12, 2013I have a workbook with multiple sheets that I need to print.
Is there a way to create a fixed print area within which you can mess around with formatting without extending or shrinking the print area?
I have tried adjusting the margins settings so that they are all the same, but this does nothing to keep a fixed print area.
Counting Matching Values In Two Separate Ranges Without Counting Duplicates?
Jan 1, 2014I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
Formula Counting Attendance - Counting 1 Day Too Many
Feb 3, 2014I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies View RelatedMerged Cell Value As Name?
Mar 21, 2014Im trying to use a merge cell value on the Active sheet as the sheets Name, my code is throwing an error when it gets to the naming the sheet.
VB:
Sub CreateSheets()
Application.ScreenUpdating = False
Dim numtimes, x As Integer, ActNm As String
[Code].....
Insert, Keep Merged
Nov 5, 2009Insert, keep merged When I insert a cell using:
View 2 Replies View RelatedHow To Separate Merged Address
Jul 4, 2014I received a file where address are merge. which i want to break in such a way that, see the below that actual data receive:
[Code] ......
i just want to break it like Add1=First Line of Address, Add2=Second Line of Address, Add3=Third Line of address.
Sort Merged Cells
Feb 22, 2010i have a problem to sort merged cells in the file attached. i tried via macro but could not reached a good solution. I have 30 plans inside the sheet and even manually is too hard to do it because i use some "=" to not type again every number since some are the same but when i try to sort the lines became diferent values.
View 10 Replies View RelatedReference Merged Cell Value
May 10, 2009The issue that I am having is with merged cell data. What I am trying to do is check the value of the merged cell against a selection from an array and place the value into a cell.
What apparently occurs is that if the row that I am on is an even number (being as my rows start on an odd number); the reference returns empty. I have tested to confirm that this only affects even numbered rows. My spread sheet has a 2 row merged cell in column 2, and the cell I am referencing from is on the second row of that merged cell. Here is some
Cut Paste Merged Cells.
Aug 12, 2009I now see why alot of you dont like merged cell's. What i am trying to do is Cut and paste a range that contains merged cells. A kit can be created using the Button on the sheet. The cells in column G are merged down to the last kit item. On Row A of the kit the 1st cell contains data validation once the Delete kit cell is re-entered it removes the selected kit from the sheet. Then will select all kits below the (now deleated one) and cut the range, and paste it to where the old kit was located.
When the kit's are pasted into the new location there are issues with the merged cells in column G. Is there a way to fix this issue, or know of another approach to keeping the same layout.
Iterate Through Merged Range
Sep 1, 2009I'm trying to iterate through a range of merged cells, but each cell in the merged row is being iterated through and I want it to go from row to row. This what I have, but the subscript goes out of range since is looking at the cells within the merged rows.
View 4 Replies View RelatedMerged Cells And Returns 0
Sep 17, 2007I have merged cell C2:C9. When I insert formula =C5, it returns 0. How do I make it to return the actual value?
View 11 Replies View RelatedAutomatically Add Merged Row Across Each Column?
Oct 31, 2011I have a scorecard that automatically adds a merged row across each column when it is exported to excel. Is there an easy way to copy the entire column over to the next sheet without manually changing the formula in increments of 2?
View 1 Replies View RelatedFiltering Across Merged Cells?
Feb 13, 2012I have exported a report to Excel from a BI tool called ZAP.
Unfortunately the cells in the columns are merged by group eg. salesperson, product, country.
I need to be able to filter by each of the columns - the only way i can think of is to unmerge and copy the information to the rest of the "merge area".
This will be extremely time consuming as there are more than 1000 rows and at least 5 columns that I want to filter.
Sales PersonCountryCustomer NameProduct Model DetailJohn WUNITED KINGDOMAPCBasicPremiumStandardStAPLAccessoriesAcrylic FsPremiumFsStStyAPOAccessoriesPremiumStandardStAPMFsPremiumStandardSt
Clear Merged Cells
Oct 8, 2012I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
How To Filter Merged Cell
Dec 19, 2013I am working on an FMEA and have a slight issue.
I have a number of merged cells in Column B.
I have merged 30 rows of column B to one Failure mode let's say 'Gaps'.
In column C there are 30 individual items relating to gaps.
When I want to filter column B to look at Gaps, it only returns the first row of the merged cells. So instead of getting the entire merged cells as a result of my filter, I get 1 row.
I hope this is clear. My question is, is there a method of filtering so that the whole merged cell is returned?
Reading Into Merged Cells
May 15, 2007I have a table where sometimes cells are merged. To the right they are not merged, but I need to link to the value of the merged cell. How can I do it if I don't want to do it manually?
Example:
Say A1:A4 is merged, A5 is just normal. I want a formula using those values, say in B1:B5. Now just filling down the formula would reference A1, A2 and so forth. This is wrong.
Copy The Merged Cell
Jun 18, 2007how to copy the merged cell from closed excel sheet and pasted over into new excel?
Linking Merged Cells
Jan 23, 2010when i try to link a merged cell to retrieve result, i get cell ref for both cells, i only like to see B7 not B7:E7.
Summary C708 Spreadsheet FormulasCellFormulaC7='Abode Homewares Pty Ltd'!B7:E7 Excel tables to the web >> Excel Jeanie HTML 4
Alternative To Merged Cells
Jul 22, 2009I have a workbook in Excel 2007 where I am creating a summation worksheet through the use of arrays which sumif and countif the other worksheets. Things went fine until about halfway through when I started getting merged cell errors. In between the calculations, I had some merged cell rows for section titles. I was not entering the array into them, but researched the error and unprotected the cells. Problem solved. Now, with 10 row to go, I started getting the error again. I unmerged the sectional title rows. I verified that the cells are not protected. However, when I ctrl+shift+enter to input the array, my formula is moving from the cell that I am inputting to, to the cell in the row directly beneath it.
View 3 Replies View RelatedLooping Through Merged Cells
Apr 16, 2007I need to compare cells in two worksheets but with a difference ex:
Worksheet 1 contains merged/single Cells
Worksheet 2 contains single Cells
Now , i fneed to compare first merged/single cell in Worksheet1 with first single cell in Worksheet2 and similarly , second merged/single cell in Worksheet1 will be compared with second single cell in Worksheet2 and so on.........
Though i can use exact and compare them maually by specifying cells but since i need to make it general , suppose second time there can be some other combination of Merged cells I need to compare with Worksheet2 .
Moving In Merged Cells
May 8, 2007I have a merged cell area, several columns wide and 2 rows deep.
I know that pressing enter before reaching the end of the first row moves to the next cell below. Is there any method, either key combination or whatever, of moving to the next row within the merged cell?
Add Filename To Merged Cells
Aug 20, 2007I have the following VBA script that merges 2 cells together, but at the end of the merge I need it to add the filename and path of the active workbook.....
Sub Merge()
Dim Cell_e, Cell_Sheet1 As Variant
Dim R, C As Integer
'This Macro is add the Test condtion and the precondtions together in 1 cell, before they are exported to TD
Sheet2.Select
R = 11
C = 9
Do Until Sheet1.Cells(R, 9).Value = ""
Cells(R, 9).Select
Cell_Sheet1 = Sheet1.Cells(R, 9).Value
Cell_e = Sheet2.Cells(R, 7).Value
Sheet2.Cells(R, 7) = "Test Condtion: " & Cell_Sheet1 & Chr(10) & Chr(10) & "Test Preconditions " & Cell_e
R = R + 1
Loop
End Sub
Unmerge Merged Cells
Jun 14, 2008I have read the posts regarding merged cells and understand they should be avoided, but I am working with spreadsheets created by others. My problem is that I need to sort the data, but some of the cells are merged so it won't work. Is there a macro command to easily find the merged cells and unmerge them?
View 5 Replies View Related
