Automatically Add Merged Row Across Each Column?

Oct 31, 2011

I have a scorecard that automatically adds a merged row across each column when it is exported to excel. Is there an easy way to copy the entire column over to the next sheet without manually changing the formula in increments of 2?

View 1 Replies


ADVERTISEMENT

Automatically Resize Row With Merged Cell?

Dec 21, 2011

Is there a way to automate the resizing of a row to accomodate the text that is pulled into a cell as the result of a formula?

I have a merged cell which receives the result of a DGET formula. The result can be as few as 6 lines of text or as many as 24 lines.

I suspect I need to count the number of lines in the result and resize based on that count multiplied by 15 points.

I don't know how to write the VBA but it would be kind of Resize Row.Countlines x 15 pts. and be executed by the event of calculating the formula from its default setting.

Practically speaking, the default setting is sized per the result of the desired code: there is a blank formatted merged cell that can be manually overwritten that is sized by the typical number of bullet points.

View 3 Replies View Related

Multiply Every Nth Cell By Another Column Whith Merged Cells, THEN Find Column Total

Aug 6, 2009

Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".

In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.

If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.

View 8 Replies View Related

Adding Column Widths Of Merged Area To Match Single Column Width

Sep 19, 2012

I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.

The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.

This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).

For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.

Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.

Then (10-1) margins allowances time 3.75 points resolves the difference.

Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.

I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.

View 1 Replies View Related

Search Column For Value With Merged Cells

Sep 3, 2009

I'm trying to search column 1 for the word "STATE".

Dim rFound As Range
On Error Resume Next
With Sheet5
Set rFound = .Columns(1).Find(What:="STATE", After:=.Cells(1, 1), LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
debug.print rFound

On Error GoTo 0
If Not rFound Is Nothing Then Application.Goto rFound, True

End With

View 9 Replies View Related

Selecting 1 Row, While 2 Cells Of The First Column Are Merged

Jul 14, 2006

how can i (in VBA) select 1 row (eacht time, it's an ? iteration? (repeating)), while the first 2 cells are merged, like:

a b c d .....
1
2 merged
3 merged

and i need to select row 3 only

and if someone could explain me how i can use the " find" function (on another sheet)

View 5 Replies View Related

Select Entire Column Except The Merged Cells

May 19, 2014

I've been working on a macro which delivers a daily report. the report is made up of 4 sections (received orders, scheduled orders, pending orders and unusual orders) each section is topped by a title which is a merge of all columns (A through I) the problem I am having is that the first column displays case numbers (to be displayed in text or number formats) and the 7th and 8th columns are dates When I try to have the VBA select the first column to format as a number, it will select all columns due to the merged cells is there a way to format only non-merged cells of a columns

This is the section I currently use for formatting but it doesn't actually work, (everything ends up in a date format)

[Code] .......

View 2 Replies View Related

Determine Last Row And Column With Data In Sheets With Merged Cells

Jan 28, 2009

I am using the following functions to determine the highest row and column that contain data:

View 4 Replies View Related

Count Cell Values In A Column And Merged Cells

Apr 10, 2012

I have 10 columns and 18 rows. Every 2nd row might contain a number. I need to sum those numbers, however, sometimes group of cells in a row can be merged and i value of a cell is then 0.

example:

A1 to D1 merged; value 6
A3 to B3 merged; value 3
B5 to E5 merged; value 2

=sum(A1,A3, A5) would return 9 - correct
=sum(B1,B3, B5) would return 2 - should be 11?
=sum(C1, C3, C5) would return 0 - should be 8?
=sum(D1,D3, D5) would return 0 - should be 8?
=sum(E1, E3, E5) would return 0 - should be 2?

View 9 Replies View Related

Copy Merged Cell, Paste As Merged Cell

Dec 17, 2009

I have a macro to copy a merged cell from one sheet and paste it to another as a merged cell. Basically, I want to copy it AS IT IS and paste it AS IT IS. My code is below.

View 4 Replies View Related

Configuring Dates: Enter A Date In One Column, Another Column Will Automatically Populate With The 1st Of The Next Month

May 8, 2009

how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:

If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008

Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.

View 3 Replies View Related

Automatically Applying Custom Value / Number In One Column Dependent On Another Column

Apr 8, 2014

I work in a factory where we create different types of units daily. Below is a list of planned production on a specific date, say today's date. This is a very crude example, with information missing, and it is important to know that there are conditions attached such as:

The types are added randomly. The amount of types is much greater meaning that each type is on it's own page with breaks between. Everything produced on this date will have a URN (unique reference number) with its first 6 digits equating to yy-mm-dd and the last two being the position of the unit in the production sequence (first=01, second=02 etc).

I have gotten it to the point where if you enter them in sequence (Type A first for example) it will lookup to see the last assigned URN and taking the quantity into account issue the correct URNs.

The issues I have are when the URNs are less than "10", there is a problem displaying the 0 before the digit which disrupts the sequence. I can provide more clear examples if required.

Type A
Date08/04/2014
QtyURN
101314040801-03
203514040804-08
462114040809

123914040810-19
Total18

Type B
Date08/04/2014
QtyURN
245114040820

290114040821
689114040822

Total3

Type C
Date08/04/2014
QtyURN
1111414040823-36

211214040821-22
675514040823-27

Total21

View 2 Replies View Related

Basis On 1st Column Automatically Select Input For 2nd Column From Another Worksheet

Mar 18, 2014

I have 02 separate excel workbooks
01 = source file
02 = data list

The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.

In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.

This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).

Screen shot is attached : Automatic Selection.jpg‎

View 1 Replies View Related

Automatically Delete Column Once Date In That Column Expired

Jul 30, 2014

Have have a excel spreadsheets with 2 columns. One with the employees name and one with the date that their warning expires. I would like the employees name to be automatically removed after the date expires. How do I do this.

View 1 Replies View Related

Automatically Copy Column To Last Cell In Another Column Upon Open

Aug 21, 2008

I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.

Private Sub Workbook_Open()

Range("A1").End(xlDown).Select
Selection.Copy
Range("L1").Select
ActiveSheet.Paste
Range("A1").Select
Application.CutCopyMode = False
UserForm.Show

End Sub

This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.

View 6 Replies View Related

Automatically Fill In Column When Certain Cell In Column Changed

Jun 18, 2009

I am trying to have some automation to my WS and what I want to do, is if a certain column (column 104) is changed, it will fill out that column with the data entered as long as the account is the same (column 5). Here is the code I tried, but realized very quickly, it puts me into a loop. This is being called by a change worksheet fuction

If Target.Column = 104 Then
If IsEmpty(Target) Then
Else
testacct = Cells(Target.Row, 5)
temptest = testacct
s_TempSwitch = Target.Value
Testoffset = 0
Do While temptest = testacct
temptest = Cells(Target.Row + Testoffset, 5)
Cells(Target.Row + Testoffset, 104).Value = s_TempSwitch
Testoffset = Testoffset + 1
Loop
End If
End If

View 3 Replies View Related

Automatically Return Me To The Top Of The Next Column

Jul 16, 2009

I am wondering if there is a key or formula that can be inserted when I get to the last cell in a column that will automatically return me to the top of the next column when I hit enter (or another key).

Currently I have to stop and use the mouse to return to the top of the next column and continue entering data.

View 7 Replies View Related

Sort A Column Automatically

Apr 29, 2006

Is there a way to automatically sort a column in ascending order while entering numbers so that the column is sorted when last number is entered.

View 11 Replies View Related

Automatically Add Different Date In Next Column

Nov 11, 2011

So, in column A I have a list of dates, I would like that in column B would be automatically inserted the date in column A + 60 days.

Example:

Column A | Column B

29.10.2011 | 29.12.2011
05.11.2011 | 05.01.2012
07.11.2011 | 07.01.2012
08.11.2011 | 08.01.2012
09.11.2011 | 09.01.2012
10.11.2011 | 10.01.2012

When I insert a date in column A the I would press TAB in column B would appear the date desired.

View 9 Replies View Related

How To Automatically Add / Delete Column

Feb 20, 2012

I have a file and that file has two different tabs. The result in first tab comes from tab two. Every time the columns in tab two changes. Is there a way that any time the column in tab changes, the same is effected in tab one. Eg. For one month there are 8 tabs and 9th is for total. for second month there are 9 tabs and 10th is for total can that effect be done in tab one accordingly?

View 6 Replies View Related

Insert Of Column Automatically

Mar 17, 2007

I have number of column.Say 10 columns. in Column say J5 I have word daily varience. I want a macro to check word daily varience and go 2 steps to the left and insert the column.

View 9 Replies View Related

Automatically Insert Row When Row Value In Column Changes

Feb 7, 2008

I'm unable to find VBA code to insert a blank row when the value in Column L changes. For example if cell L2 = 400 and cell L3=500 I need to insert a blank row between L2 and L3. I need the macro to search the entire sheet which will have variable numbers of rows but Column L will always have data.

View 3 Replies View Related

Automatically Copy And Paste Column?

Jan 4, 2013

I need code automatically copy and paste column A to column B every very three seconds

View 8 Replies View Related

Every Column Of Workbook Sort Automatically?

Mar 6, 2014

This code sort data of every Column of workbook.

I want sort only range e.g (c10:c61) of sheet(10) correct this code :

[Code] .....

sample.xls

View 1 Replies View Related

Automatically Summing Last 12 Cells In A Column?

Apr 21, 2014

I often look at utility data (start date, end date, use, and cost) and have a large list with up to several years worth of monthly data. I am trying to write a formula that will automatically sum the last 12 entries of "use" no matter the amount of lines; be it 12 or 112.

View 2 Replies View Related

Record Timestamp In One Column Automatically

Jan 15, 2009

I am creating a worksheet in excel 2003. Want to use this for attendance log.

As we input numercial data in column B, we would like in column I to create a formula that automatically inputs the actual time that info was entered in column B.

View 14 Replies View Related

Way To A Column Be Filled Automatically By What Is Written On Others

Jan 15, 2009

Is there any way to a column be filled automatically by what is written on others columns.

Example: If one of the cells A2 or B2 and C2 are Nonblank, fills automatically the cell H2 with "ABC2" And If some of the cells D2 and E2 are Nonblank fills the cell H2 with "DE2"

View 2 Replies View Related

Automatically Add Formula To Next Cell In Column

Apr 20, 2009

I have a list of names in column 'A' and a lookup formula in column 'B'. Rather than drag and copy the formula to succeeding rows I would like to have the formula added to column 'B' when a value (name) is entered into column 'A'.

The list in column 'A' is auto sorted by alphabet and the lookup reference in column 'B' need to stay with the value (name) in column 'A'. Mabe some conditional format/formula that says if their is a value in cell A2 to copy the formula in A2 into A3 and so on down the list.

View 3 Replies View Related

Automatically Insert Blank Row Below Each Row That Has Value In Certain Column

Jul 28, 2014

After importing a data set into the worksheet entitled "SPACE", I am trying to find the column entitled "Variability Cpu" and then for every cell in that column that has a value in it, I would like to insert a new row beneath that cell. I thought my code made sense, but I get the "Run-time error '424': Object required" error on the line in red below so apparently I'm missing something. why I'm getting this error (doesn't the object variable shtS refer to the worksheet object "SPACE"? Why is it saying object required?). Here's what I've got so far:

[Code] .....

View 5 Replies View Related

Automatically Number An Index Column

Oct 24, 2005

I am working with a group of individuals that will be passing around an
excel spreadsheet to one another, and wanted to come up with a way to have
the 1st column act as an index, with the key component requiring that the
index column would automatically re-number itself, if someone entered a new
row.

A typical value in the first column looks like this: 8-5-012-005

Which in our case means that there are 4 series of number sets, separated by
dashes. So the first set is 8, the second 5, the third 012, and the fourth
005. The available range for the sets are 7 or 8 for the first, 5 through 9
for the second, and 0 through 130, and 0 through 200, respectively.

So the user can pick any of these ranges for when they decide to create a
new record (row).

Here is the way the spreadsheet columns currently look (always sorted by
Tract_ID):

Row-1 Tract_ID Parcel_ID
Row-2 7-5-065-105 01245787
Row-3 7-5-112-005 01245787
Row-4 8-5-012-005 01245787
Row-5 8-6-030-125 01245787

Now, here is the way I'd like to have the spreadsheet columns look with the
Index_No (can be either Numeric or Text - depending on your recomendations).
The sort order is based on 1st, the index number, then 2nd the Tract_ID:

Row-1 Index_No Tract_ID Parcel_ID
Row-2 1 7-5-065-105 01245787
Row-3 2 7-5-112-005 0126A560
Row-4 3 8-5-012-005 01005147
Row-5 4 8-6-030-125 01000541

Then, let's say the user wants to enter a new value like say, 7-5-105-021.
That value would need to go between Row-1 and Row-2, which, if they just
inserted the value in the row of their choice, would screw up the indexing.

What I need is a way to ALWAYS create an index (automatically), no matter
where they decide to put the value in the spreadsheet, AND it would update
all of the other Indexes as well (very important requirement).

So the end result would be this:

Row-1 Index_No Tract_ID Parcel_ID
Row-2 1 7-5-065-105 01245787
Row-3 2 7-5-105-021 00547419
Row-4 3 7-5-112-005 5126A560
Row-5 5 8-5-012-005 00005147
Row-6 5 8-6-030-125 00001541

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved