I am trying to create textboxes during runtime
The seceond For(c) is working, but not the first For (r)
This is my data looks like at the moment, it Changes.!
Name
Peter
Jan
Rose
Totalt
[Code]....
Code:
Dim r As Long, c As Long
i = 2
j = 1
For r = 1 To 4
[Code]....
I have a combobox in which are the numbers 1 thru 10. I'd like for the user to be able to choose a number and then that number of textboxes appear below. I have the textboxes invisible on the userform and I'm trying to work out to code to show them when the number is selected (by command button). Heres my code, it only seems to show my first set of textboxes no matter what number is in the combo box. Can someone please help me make this work? And is there a more concise way to do this?
i changed the names of the textboxes because i built the form before i thought about the code and frankly there are too many all together for me to remember their names
Private Sub CommandButton7_Click() 'Ok button page 3
Dim i As Integer
Dim j As Integer
For i = 1 To 10
Select Case Val(ComboBox21.Text) = i
Case 1
I am trying to create a userform during the progression of my code. I found this is the MS help website but it doesn't work for me . .
Sub BuildMyForm()
Set MyNewForm = _
VBE.ActiveVBProject.VBComponents.Add(ComponentType:=vbext_ct_MSForm)
End Sub
Following bit of code runs fine if placed in Word VBA:
Code:
Public Sub TaskUsageInExcel()
Dim tsk As Task
For Each tsk In Tasks 'Gives RTE 429 when run through Excel
Debug.Print tsk.Name
Next tsk
End Sub
So I referenced 'Microsoft Word 12.0 Object Library' in Excel and ran the code and it gave me this error 429. Noticeable part was, no instance of word was running at that time.
So I modified the code as below:
Code:
Public Sub TaskUsageInExcel2()
Dim wdApp As Word.Application
Dim tsk As Task
[Code]....
I have a code that adds a couple of ComboBoxes to a UserForm (the number of ComboBoxes is variable). Now that I want to control a certain ComboBox based on the selected value of another ComboBox (change or click event), how do I do that via VBA code?
View 3 Replies View RelatedThe app. that I have been developing requires the user to create a formula in a combobox in a userform that I have setup for them.
They have a list of variables that they can choose from, which they are allowed to use in their formula creation.
A typical formula may look like this:
=SUM(25*DistFromBack) where DistFromBack = 4
I then take their formula and place it out on the sheet which returns me a value of (in this case) 100.
Now this works fine until someone wrote a formula that looked like this:
=SUM((25*DistFromBack)
Now with the double brackets at the front it creates a formula that Excel cant deal with and gives me a 'Runtime error 1004'.
I have tried to trap this error (On Error Goto .....) but unsucessful.
I would really like to have a check when the user types an erronous formula, but dont really know how to go about it.
When I am running a macro in excel 2003/windows 7 and trying to create a text file, it is giving this error. I am attaching two pictures.
View 1 Replies View RelatedI have a userform that has one combobox at the top created manually. When the userform is opened, the user select an option in the combobox (these options are taken from a range on 1 worksheet). From the selection of the combobox, I use the comboxbox's change event to create and display 5 columns of textboxes and 2 columns of command buttons on the userform.
The number of rows of textboxes created depend on the option selected from the combobox since each option links to a different range of cells. Each of the 5 textboxes in each are set to be ".enabled = False" and display text as per the cell values within a range on another worksheet. 2 Columns of command buttons are created at the end of each row of textboxes - 1 is enabled and the other is not.
The creation of the textboxes and command buttons works as required. However, I am having problems with setting click events for each command buttons. When the 1st column of Command buttons are created, I need the click events to be created and filled out with 2 actions:
1. Enable all textboxes in the same row as the command button
2. Enable the other command button in the same row.
Here is the code I have so far that creates the textboxes and command buttons.
Each of the 5 textboxes and 2 command buttons have a unique name so the 1st row will have textbox and command button names of cTxtA1, cTxtB1, cTxtC1, cTxtD1, cTxtE1, CmdAmend1 and CmdConfirm1. The 2nd row will have the same names but with 2 on the end and so on. The bold sections is the code for the creation of the command buttons that I want click events for.
Code:
Private Sub CboTeamSelect_Change()
Application.ScreenUpdating = False
If CboGroupSelect.Value = "" Then Exit Sub
Dim cTxtA As Control, cTxtB As Control, cTxtC As Control, cTxtD As Control, cTxtE As Control
Dim CmdAmend As Control, CmdConfirm As Control
Dim iNum As Integer
Dim TxtTop As Long
[code]....
i have 2 userforms one with textboxes and the other one with listbox and textboxes.
Everytime user input their data(ie:first name, last name, address etc) in the first form the data's going to be saved in Worksheet("customerSheet") and later on to be displayed in the second form. using the listbox you can select the customer's name and the customer info will be displayed in the textboxes.
here's my code in second form
Private Sub UserForm_Initialize()
Worksheets("CustomerSheet").Activate
Range("A1").Select
'ActiveCell.CurrentRegion.Name = "Database"
'Selection.End(xlDown).Select
'ActiveCell.address(False, False)
viewCustomerBox.RowSource = "A2:A15"
End Sub
I have a big clunky spreadsheet that I thought I'd tidy up by adding a userform to keep the info
There's a combination of textboxes, option buttons, listboxes and a multipage. Everything seems to load correctly, and selecting an item in a listbox correctly fills the textboxes, but when I change the value of the textboxes, only 2 out of 4 holds that value and sends it to the correct cell.
The code that is supposed to send all the values is;
VB:
Private Sub CommandButton1_Click()
'check that a row has been selected
If Range("K3") = "" Then
[Code].....
The culprits are TextBox3 and TextBox4.
I've tried changing the names, I've checked that there are no other textboxes pasted on top, I've even tried adding in a MsgBox line to show the value of the textbox; if the form loads and the box grabs a value of "ABC" from the spreadsheet, and I change it to "DEF", when I hit the button to execute the above code the textbox goes straight back to "ABC".
But it's not an issue with TextBox2 ...
Other parts of the code include a UserForm_Activate block and 5 x ListBox_Click's.
So the think is that i have 197 textbox and i whant it to fill them with the range of a sheet preselected automatly with a loop.Whitout a loop i have this.
VB:
Dim e As Integere = CInt(TextBox198.Text)
TextBox1.Text = Sheets("Dia" + " " + CStr(e)).Range("A3").Value
that work, but its to slow, if i try this and also to modify
VB:
Dim e As Integer
For e = CInt(TextBox198.Text) To CInt(TextBox199.Text)
Dim i As Integer
For i = 1 To 17 [code]....
Where Textbox198.text define the start day (sheet), and Textbox199 the final day, this is highlighted.Also i dont know how to write the textbox(i).text loop, i try a lot of ways and always have problems.I tried to write like this that also didnt work out: TextBox & i & .text and TextBox+i.text
how to create an array of textboxes in excel vba. I have declared an array of type textboxes and I'm still getting errors. I'm assuming its a flaw in my understanding here. The error is Runtime error 13 'type mismatch'.
View 2 Replies View RelatedUsing vba textboxes too do math .I have attached a sheet too explain, not sure if its possible. If it is I know this is the place too find out.
View 4 Replies View RelatedI'm populating the textbox (which is locked, so can't be edited) using
Private Sub ComboBox1_Change()
If ComboBox1.Value = "JS Logs" Then
UserForm1.TextBox1.Value = "A load of info on how JS works" & vbCrLf & "blah, blah blah"
elseif etc. etc.
Does anyone know how I can add formatting to the textbox? E.g. making certain bits of the text Bold/italic/different size/underlined etc? I don't want to apply this format to the whole textbox, just bits of the contents (i.e. sub-titles)
I have a user form that has a section of 32 text boxes that all information randomly placed inside some of them. Most of the them will be empty.
Is there an easy way to have have a macro loop through these text boxes and find their values (if they have any), and then place those values on the next available row in a worksheet?
Here is a picture of what they look like
What I'm trying to do is get the next rows in my sheet to say:
5
1
22
32
11
23
1
15
etc...
I have about 21 textboxes that are going to be watched by 1 textbox called totaltime on a userform.
I created the code below to add up those 21 textboxes, but it's not showing anything even though they are populated, some with zeros and some with one through eight.....
I have a number of textboxes, or other boxes, using exactly the same code. In visual basic you can assign an index to these boxes and create one code where the index number specifies the box you are working with.
I have tried finding a way to do thing in VBA, but came up against a blank. I realise that this is either not possible or very simple, but right now I am stuck with the 'not possible'. Does anyone know if the 'very simple' is an option. It would greatly decrease the size of my program, make it easier to visualise and not make me change to much each time.
Of course I refer to subs as much as possible making these routines 3 line routines (sub-call-endsub), but still there are a lot of textbox1_click() routines whereas textbox_click(index) would be nicer.
Is there a way to do something like this? The purpose is to get the value from a text box and put it in a cell...
View 4 Replies View RelatedI am working on a form in VB and have a textbox that needs to be formatted so that every four spaces in the TB has a dash (users will input an Account Number).
View 2 Replies View RelatedUserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?
View 8 Replies View RelatedI have a form and I would like certain textboxes to be inaccessible via tabbing. In the properties for each textbox I have selected LOCKED, so that their values cannot be altered. Is there a way to completely bypass them when tabbing?
View 1 Replies View RelatedI have a userform with 3 textboxes. The user will put numbers into 2 of them and the 3rd will add the other 2 textboxes together. My problem is that the result is just stringing the values together and not adding them together. So if textbox1 is 2 and textbox2 is 4 the result is 24 and not 6. Can someone tell me where im going wrong?
View 5 Replies View RelatedCan I use a commandButton too clear data out of my textBoxes. Been reading a lot and do not understand how,I'm the type of guy if you show me too the water I will drink it. I will send a example of what I want too do.
View 3 Replies View RelatedI've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
I have a userform with a number of textboxes where the time is entered in the format like 00:00, (24 hour clock).
What I need is code to calculate the time in minutes / hours between 2 of these textboxes and for the result to be displayed automatically in the third textbox with no user input required, (other than to put in the start and end times).
The third textbox must display the result in the same format as above - here is the code I use to get the textbox to force the time in as above;
Code:
Private Sub TextBox3_Change()
Dim t As Date
'If they enter 4 digits and NO colon e.g. 1400
If Len(TextBox3.Value) = 4 Then
[Code] ......
I have this code:
Private Sub TextBox135_Change()
On Error Resume Next
TextBox138.Value = Format(CDbl(TextBox135.Value) / CDbl(TextBox86.Value), "0.0000")[code].....
It suppose to take one input and calculate for the other variables the problem is that once it writes the outputs the other text box it activates the second text box code so I keep getting the error "13" and the result is the same no matter what number I put.
I have WS with over 100 text boxes. Many of them contain text "Current Program".
I would like to replace text "Current Program" in all these Textboxes with text "Testing".
How can I do it without opening each Textbox and replacing text manually?
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change()
If Me.TextBox1 = "" Or Me.TextBox2 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub TextBox2_Change()
If Me.TextBox2 = "" Or Me.TextBox1 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub UserForm_activate()
Me.CommandButton1.Enabled = False
End Sub
Say I have a userform that has a bunch textboxes on it. If I wanted to take 20 of those textboxes, and scan through and count which ones have values, is there a simple way to do that?
I need to make it so that if more than 11 of those 20 textboxes contain text, a msgbox will popup and tell my users they are exceeding their limit.
I was thinking one way may be make them all a list, and then somehow count through the list and once the count reaches a specified number it msgbox them...but I'm not sure exactly what the process is for that.
If I copy several cells and try to paste into my userform textboxes they all end up in the first textbox. There are of course equal amount of textboxes as copied cells. How can I make each following cell to be pasted in their seperate texbox?
e.g I copy range A1:A4 and try to copy into 4 textboxes by starting with the first textbox.