Loop Between Textboxes?
Jul 31, 2013
So the think is that i have 197 textbox and i whant it to fill them with the range of a sheet preselected automatly with a loop.Whitout a loop i have this.
VB:
Dim e As Integere = CInt(TextBox198.Text)
TextBox1.Text = Sheets("Dia" + " " + CStr(e)).Range("A3").Value
that work, but its to slow, if i try this and also to modify
VB:
Dim e As Integer
For e = CInt(TextBox198.Text) To CInt(TextBox199.Text)
Dim i As Integer
For i = 1 To 17 [code]....
Where Textbox198.text define the start day (sheet), and Textbox199 the final day, this is highlighted.Also i dont know how to write the textbox(i).text loop, i try a lot of ways and always have problems.I tried to write like this that also didnt work out: TextBox & i & .text and TextBox+i.text
View 1 Replies
ADVERTISEMENT
Jul 24, 2008
I have a user form that has a section of 32 text boxes that all information randomly placed inside some of them. Most of the them will be empty.
Is there an easy way to have have a macro loop through these text boxes and find their values (if they have any), and then place those values on the next available row in a worksheet?
Here is a picture of what they look like
What I'm trying to do is get the next rows in my sheet to say:
5
1
22
32
11
23
1
15
etc...
View 9 Replies
View Related
May 31, 2007
Is there a way to do something like this? The purpose is to get the value from a text box and put it in a cell...
View 4 Replies
View Related
Mar 28, 2008
Loop sequentially numbered text boxes. I have a user form with two sets of text boxes one set named txtN109 through txtN134 the other txtC109 though txtC134. Instead of having to have
ActiveCell.Offset(c, 0) = txtN109
ActiveCell.Offset(c, 0) = txtN110
I would like to loop though the text boxes like I am the offset value.
Do While i <= 134
ActiveCell.Offset(c, 0) = “xtN”& (i)
i= i+1
Loop
Puts txtN110 in the cell. I have tried other ways but always get about the same thing.
View 2 Replies
View Related
Dec 3, 2009
i have 2 userforms one with textboxes and the other one with listbox and textboxes.
Everytime user input their data(ie:first name, last name, address etc) in the first form the data's going to be saved in Worksheet("customerSheet") and later on to be displayed in the second form. using the listbox you can select the customer's name and the customer info will be displayed in the textboxes.
here's my code in second form
Private Sub UserForm_Initialize()
Worksheets("CustomerSheet").Activate
Range("A1").Select
'ActiveCell.CurrentRegion.Name = "Database"
'Selection.End(xlDown).Select
'ActiveCell.address(False, False)
viewCustomerBox.RowSource = "A2:A15"
End Sub
View 9 Replies
View Related
Mar 31, 2008
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
View 9 Replies
View Related
May 14, 2014
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
View 4 Replies
View Related
Sep 11, 2013
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
View 4 Replies
View Related
Aug 30, 2006
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
View 7 Replies
View Related
Feb 7, 2008
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies
View Related
Nov 4, 2013
I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
View 2 Replies
View Related
May 28, 2013
I have a big clunky spreadsheet that I thought I'd tidy up by adding a userform to keep the info
There's a combination of textboxes, option buttons, listboxes and a multipage. Everything seems to load correctly, and selecting an item in a listbox correctly fills the textboxes, but when I change the value of the textboxes, only 2 out of 4 holds that value and sends it to the correct cell.
The code that is supposed to send all the values is;
VB:
Private Sub CommandButton1_Click()
'check that a row has been selected
If Range("K3") = "" Then
[Code].....
The culprits are TextBox3 and TextBox4.
I've tried changing the names, I've checked that there are no other textboxes pasted on top, I've even tried adding in a MsgBox line to show the value of the textbox; if the form loads and the box grabs a value of "ABC" from the spreadsheet, and I change it to "DEF", when I hit the button to execute the above code the textbox goes straight back to "ABC".
But it's not an issue with TextBox2 ...
Other parts of the code include a UserForm_Activate block and 5 x ListBox_Click's.
View 4 Replies
View Related
Mar 9, 2009
how to create an array of textboxes in excel vba. I have declared an array of type textboxes and I'm still getting errors. I'm assuming its a flaw in my understanding here. The error is Runtime error 13 'type mismatch'.
View 2 Replies
View Related
Mar 12, 2009
Using vba textboxes too do math .I have attached a sheet too explain, not sure if its possible. If it is I know this is the place too find out.
View 4 Replies
View Related
Apr 19, 2008
I'm populating the textbox (which is locked, so can't be edited) using
Private Sub ComboBox1_Change()
If ComboBox1.Value = "JS Logs" Then
UserForm1.TextBox1.Value = "A load of info on how JS works" & vbCrLf & "blah, blah blah"
elseif etc. etc.
Does anyone know how I can add formatting to the textbox? E.g. making certain bits of the text Bold/italic/different size/underlined etc? I don't want to apply this format to the whole textbox, just bits of the contents (i.e. sub-titles)
View 9 Replies
View Related
Jan 23, 2009
I have about 21 textboxes that are going to be watched by 1 textbox called totaltime on a userform.
I created the code below to add up those 21 textboxes, but it's not showing anything even though they are populated, some with zeros and some with one through eight.....
View 6 Replies
View Related
Nov 7, 2003
I have a number of textboxes, or other boxes, using exactly the same code. In visual basic you can assign an index to these boxes and create one code where the index number specifies the box you are working with.
I have tried finding a way to do thing in VBA, but came up against a blank. I realise that this is either not possible or very simple, but right now I am stuck with the 'not possible'. Does anyone know if the 'very simple' is an option. It would greatly decrease the size of my program, make it easier to visualise and not make me change to much each time.
Of course I refer to subs as much as possible making these routines 3 line routines (sub-call-endsub), but still there are a lot of textbox1_click() routines whereas textbox_click(index) would be nicer.
View 9 Replies
View Related
Jul 23, 2007
I am working on a form in VB and have a textbox that needs to be formatted so that every four spaces in the TB has a dash (users will input an Account Number).
View 2 Replies
View Related
Oct 24, 2009
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
View 3 Replies
View Related
Feb 15, 2014
UserForm1, page5. From Combobox1 I choose a city and the textboxes give me the values from Sheet3. I'd like to color in green the smallest value. for example, if for LHR I find for A-4214, B-4420, C-3127 => value 3127 to be green. The problem is I have more textboxes in other pages and some of them are colored in green also. Is possible to reffer to these textboxes from page5 only?
View 8 Replies
View Related
Mar 10, 2014
I have a form and I would like certain textboxes to be inaccessible via tabbing. In the properties for each textbox I have selected LOCKED, so that their values cannot be altered. Is there a way to completely bypass them when tabbing?
View 1 Replies
View Related
Jan 7, 2009
I have a userform with 3 textboxes. The user will put numbers into 2 of them and the 3rd will add the other 2 textboxes together. My problem is that the result is just stringing the values together and not adding them together. So if textbox1 is 2 and textbox2 is 4 the result is 24 and not 6. Can someone tell me where im going wrong?
View 5 Replies
View Related
Mar 12, 2009
Can I use a commandButton too clear data out of my textBoxes. Been reading a lot and do not understand how,I'm the type of guy if you show me too the water I will drink it. I will send a example of what I want too do.
View 3 Replies
View Related
May 10, 2009
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
View 8 Replies
View Related
Oct 21, 2011
I have a userform with a number of textboxes where the time is entered in the format like 00:00, (24 hour clock).
What I need is code to calculate the time in minutes / hours between 2 of these textboxes and for the result to be displayed automatically in the third textbox with no user input required, (other than to put in the start and end times).
The third textbox must display the result in the same format as above - here is the code I use to get the textbox to force the time in as above;
Code:
Private Sub TextBox3_Change()
Dim t As Date
'If they enter 4 digits and NO colon e.g. 1400
If Len(TextBox3.Value) = 4 Then
[Code] ......
View 2 Replies
View Related
Jul 21, 2012
I have this code:
Private Sub TextBox135_Change()
On Error Resume Next
TextBox138.Value = Format(CDbl(TextBox135.Value) / CDbl(TextBox86.Value), "0.0000")[code].....
It suppose to take one input and calculate for the other variables the problem is that once it writes the outputs the other text box it activates the second text box code so I keep getting the error "13" and the result is the same no matter what number I put.
View 9 Replies
View Related
Jul 27, 2014
I am trying to create textboxes during runtime
The seceond For(c) is working, but not the first For (r)
This is my data looks like at the moment, it Changes.!
Name
Peter
Jan
Rose
Totalt
[Code]....
Code:
Dim r As Long, c As Long
i = 2
j = 1
For r = 1 To 4
[Code]....
View 6 Replies
View Related
Oct 26, 2007
I have WS with over 100 text boxes. Many of them contain text "Current Program".
I would like to replace text "Current Program" in all these Textboxes with text "Testing".
How can I do it without opening each Textbox and replacing text manually?
View 9 Replies
View Related
May 5, 2008
I have a combobox in which are the numbers 1 thru 10. I'd like for the user to be able to choose a number and then that number of textboxes appear below. I have the textboxes invisible on the userform and I'm trying to work out to code to show them when the number is selected (by command button). Heres my code, it only seems to show my first set of textboxes no matter what number is in the combo box. Can someone please help me make this work? And is there a more concise way to do this?
i changed the names of the textboxes because i built the form before i thought about the code and frankly there are too many all together for me to remember their names
Private Sub CommandButton7_Click() 'Ok button page 3
Dim i As Integer
Dim j As Integer
For i = 1 To 10
Select Case Val(ComboBox21.Text) = i
Case 1
View 9 Replies
View Related
Jul 17, 2008
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change()
If Me.TextBox1 = "" Or Me.TextBox2 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub TextBox2_Change()
If Me.TextBox2 = "" Or Me.TextBox1 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub
Private Sub UserForm_activate()
Me.CommandButton1.Enabled = False
End Sub
View 9 Replies
View Related
