Update Userform Textboxes On The Fly

May 10, 2009

I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.

A couple of issues I've struggled with:
1. I'd like the UserForm to open when the workbook opens.
2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B
3. I'd like the UserForm to always stay open; the user cannot close it.

I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.

View 8 Replies


ADVERTISEMENT

Update Spreadsheet With Textboxes Content

Sep 6, 2007

I have about 5 text boxes. The user enters data in each text box and, as of right now, the data automatically gets saved as I am using the _change event. (TextBox1_Change()) This stores the value of each text box into a cell of my choosing on an Excel spreadsheet automatically.

From what I gather (according to a great ozgrid administrator ), it would be better, as a coder, to not use the _Exit event and instead, perhaps I should use the _Enter event. (TextBox1_Enter.) This way, when the user fills out the information in the text boxes, the information will NOT be loaded onto an Excel spreadsheet automatically as they type. (Which is what it does now by using the following code for each text box

Private Sub TextBox1_Change()
Sheets("Sheet1").Range("A" & intRow.) = TextBox1.Value........

View 9 Replies View Related

UserForm Textboxes To Be Filled

Jul 17, 2008

I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox

Private Sub TextBox1_Change()
If Me.TextBox1 = "" Or Me.TextBox2 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub

Private Sub TextBox2_Change()
If Me.TextBox2 = "" Or Me.TextBox1 = "" Then
Me.CommandButton1.Enabled = False
Else
Me.CommandButton1.Enabled = True
End If
End Sub

Private Sub UserForm_activate()
Me.CommandButton1.Enabled = False
End Sub

View 9 Replies View Related

Grouping Textboxes In A Userform

Mar 31, 2009

I am working on creating a userform to make sure that information gets entered correctly into a spreadsheet. This is a rather large user form with numerous text and list boxes on a number of tabs. I also have a toggle box at the top of the form that helps choose what sort of data I will be needing. When the toggle box is selected I only need about half as much information and do not want users to be able to enter the rest. I am looking to enter code that changes the enabled property of the unneeded boxes to false when the toggle button is selected and back to true when it is clicked off. Unfortunately, this involves about 50 text/list boxes. Things are going to get very messy if I need to write out a seperate line for each of these items.

My question is this. I know there is a way to group these boxes and change the properties of the group as a whole in the editor, but is there a way to refer to such groups and their properties in my code.

View 9 Replies View Related

Userform With The Unfilled Textboxes

Jul 6, 2009

Here is my case:
I have made a userform called "frmvakanties"
this form contains a certain amount of textfields in wich the user should be able to put dates (d-mm-yyyy)
the userform also contains a OK button, wich is called cmdOK.
in the the Private sub cmdOK_click it says:

Dim txtNwJrvan as date
unload me
So far no problem.
For this question i just take one of the textboxes, wich is called 'txtnwjrvan'

Now have my vb module. I wrote there: 'frmvakanties.Show'

When i run this program, I get the userform with the unfilled textboxes, fill them with a date and press OK.

this is where my problem is: after frmvakanties.show i've typed
msgbox (frmvakanties.txtNwJrvan)

I do get a msgbox, but it is empty!

I just made this msgbox to check what date it returns, since i need the entered date for further use in my script.

View 9 Replies View Related

Clear All UserForm TextBoxes

Jul 18, 2007

I have a bunch of TextBoxes on a UserForm, and I would like to create a Sub to clear all of them. Something like that:

For I = 1 To 10
NameBox = "TextBox_Area" & I
For Each objControl In UserForm1.MultiPage_1.Pages(1).Controls
If TypeOf objControl Is MSForms.TextBox And objControl. Name = NameBox Then
objControl.Text = ""
End If
Next objControl
Next I

But of course there is no Text method for Controls. And I cannot loop directly through TextBoxes instead of Controls. So what can I do ?

View 2 Replies View Related

Calculate Age With Userform Textboxes

Apr 23, 2008

I have a userform with three textboxes.

1. txtStartDate
2. txtDateofBirth
3. txtAge

What I would like is for the txtAge box to be populated once dates have been entered into the other two textboxes.

It needs to be the person's age as calculated between the Date of Birth to the Start Date.

View 3 Replies View Related

Codes For Clearing Userform Textboxes?

Sep 14, 2013

I am looking for codes to clear the textbox fields while the existing codes transfer the information to the execel page. I have programmed it to transfer the data to the sheet but I can't write the codes to clear the textboxes for the next entry.

I want to program the same command button to transfer the data to the sheet and clear the textboxes simultaneously.

VB:
Private Sub CB2_Click()
Unload UFH1
End Sub

Private Sub L1_Click()

[Code].....

View 5 Replies View Related

Clear Dependent Userform Textboxes

Nov 17, 2013

I have a userform that has 3 sections. In each section are a number of text boxes which, following input of a value in the first text box in the section (master box), self populate with data from a spreadsheet.

This works apart from when I change the value of one of the first text boxes. Is there a simple bit of code that if on the change of the value in the master box will reset the 'dependent' text boxes to empty?

View 5 Replies View Related

Userform With Two Textboxes - Date Format

Jun 12, 2014

I have a Userform and 2 text boxes that require users to enter a date. I really need the users to be forced to enter the date in "mm/dd/yy" format or they cannot get passed that text box or at least an error comes up.

View 2 Replies View Related

Sum 2 Textboxes On Userform To 3rd When Data Entered?

Jun 13, 2014

I am trying to get two text boxes on a userform to populate a third box on the form when the user inputs the data in both of the first two boxes. I am pretty sure i need to use a change event, but I am not sure how or what triggers them. so I have:

[Code] ....

but they don't work when I put data in VSShortPrem and VSLongPrem textboxes. Do I need to call them to the userform module?

View 6 Replies View Related

Get Statistical Results In Textboxes Of Userform

Jun 27, 2014

When the user choose a customer from a combo box then i need to get some statistical results in the text boxes, such as last amount of credit-charge, last date, and amount that he has to pay us until now.

When user adds a new amount in the grey textbox then this has to be added in the previous amount.

I have the expected results of my example in my sample sheet.

View 11 Replies View Related

Currency Format In Textboxes Of Userform?

Feb 11, 2014

I have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?

In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.

How can i do this?

View 11 Replies View Related

Format All The TextBoxes On A UserForm The Same At One Time

Apr 1, 2009

I have 30+ Textboxes on the form.

In the process of entering data the textBoxes get different .BackColor settings.

When the reset command button is hit the boxes stay the same colors, so I could reset them with a single command rather than 30+ lines of formatting code.

View 7 Replies View Related

How To Empty All Comboboxes And Textboxes In A Userform

May 3, 2009

I have a userform with many comboboxes and textboxes and I am using the following code to empty those controls:

View 9 Replies View Related

Move Values In Textboxes That Are In Userform Up And Down

Jan 29, 2012

I have seen a lot on how to do this with a listbox, but i need to do it with textboxes. I have 30 textboxes in order and would like to have two buttons (1 For move up and 1 for move down) to move the value from the current textbox in focus (active) and swap it up or down.

View 7 Replies View Related

Userform [Averages Of Textboxes IF Populated]

Mar 23, 2009

I am trying to create some VBA code, which will average the contents of up to twelve textboxes on a Userform, and then put the average in the next one.

I have sorted this, HOWEVER.. I have a couple of problems.

The average isn’t correct Some of the textboxes may be blank, and therefore should not be included in the calculation

Here is my code

Private Sub CommandButton3_Click()
Dim results(12) As Double
Dim ave As Double
results(1) = CDbl(TextBox5.Value)
results(2) = CDbl(TextBox6.Value)
results(3) = CDbl(TextBox7.Value)
results(4) = CDbl(TextBox8.Value)
results(5) = CDbl(TextBox9.Value)
results(6) = CDbl(TextBox10.Value)
results(7) = CDbl(TextBox11.Value)
results(8) = CDbl(TextBox12.Value)
results(9) = CDbl(TextBox13.Value)
results(10) = CDbl(TextBox14Value)
results(11) = CDbl(TextBox15.Value)
results(12) = CDbl(TextBox16Value)

ave = Application.WorksheetFunction.Average(results)

TextBox17.Value = ave

End Sub

View 9 Replies View Related

Fill Textboxes In UserForm From ComboBox

Jun 4, 2006

I've been trying for hours to populate a textbox on a userform based on a combo box. I'm including a zip of my workbook to see. (don't laugh to hard at my code, like I said I'm green...:) When you select a mix design in my form I want the next six combo boxes to populate. The way I have it now is based on one of the many examples found here, (none of which have worked for me so far, but this one said "the simplest way to do this is......") And I get an error 425 - "Object not found". I've done searches based on the error but haven't found an answer.

View 4 Replies View Related

Multiple Textboxes: Multipage UserForm

Nov 2, 2006

re: Validating Textbox to work on a simple form.)

View 2 Replies View Related

Fill Multiple UserForm TextBoxes

Dec 30, 2006

I have a form using in Excel 2003 that's 5 columns and 20 rows I need to populate the Textboxes with values from a worksheet. I want to use a loop statment that fills the first row, then increments to the next row until all 20 are filled. I have named each row the same name except the last character is the row number 1-20.

ie on the form textboxes named:

NameRow1 AddressRow1 CityRow1 StateRow1 ZipRow1
NameRow2 AddressRow2 CityRow2 StateRow2 ZipRow2

This is what I want to happen

Sub test()
Dim RowNumber As Integer
Dim FormRow As Integer
Dim NameRow As Object
Dim AddressRow As Object
Dim CityRow As Object
Dim StateRow As Object
Dim ZipRow As Object
RowNumber = 3 'Row in Data sheet
FormRow = 1 'Row on form
NameRowString = "NameRow" 'first part of the named object
Do While FormRow < 21
NameRowVar = NameRowString & FormRow................

View 2 Replies View Related

Fill Associated Row Range From UserForm TextBoxes

May 30, 2008

I have a user form that with a textbox on that I want to use a search tool, then display the outcome on the user form. the worksheet has 3 columns in titled Name, Description,Contact number. What i want the form to do is when I place the comapny name in the text box on the form and press enter it will look though my table on the worksheet and display the Description and contact number on the form. I am not sure if I will need to place a frame or text box onto the form for this as of yet all i have is the textbox.

View 5 Replies View Related

Format Multiple Userform TextBoxes

Jun 13, 2008

When opening up a userform I'm attemping to change the value of a range of textboxes ( 6 to 18) to 0.00.

To do so I used the following code which is controller by a command button

Private Sub CommandButton1_Click()

Dim i As Integer
For i = 6 To 18
userform1.textbox(i).value = format(0,"#,##0.00)
Next i
userform1.show
End Sub

It keeps stalling at "textbox(i)"

A simple solution I'm sure.
Simple problem I'm

View 9 Replies View Related

Getting Results From 4 Combobox Selection To Textboxes In Userform

Apr 19, 2013

My data resides in a workbook in sheet2 and sheet3. I have 4 comboboxs refering to different columns in sheet2 and sheet3. Basically when the user selects all the four comboboxs, the criteria should be satisfied and the results in terms of rows matching those values should be shown in the textboxs below.

Each three of the textboxs refers to individual columns in sheet2 and sheet3. All I want to do is simple search criteria on both sheet 2 and sheet3 and put the results in textboxs.

I have populated my comboboxs but dont know the macro to do the search results .

my userform,which has 4 comboboxs

combobox1 = sheet2 column C
combobox2 = sheet2 column BL
combobox3 = sheet3 column K
combobox1 = sheet3 column F

The results which satisfy the above 4 criteria should come from ,when user presses POP UP DETAILS BUTTON,

textbox1= sheet3 column C
textbox2= sheet3 column N
textbox3= sheet2 column T

Actually I have many records which satisfy the above 4 criteria, dont know how to display them whether in textbox or any another method.

View 3 Replies View Related

Copy All Values In Row From Userform To Worksheet If Textboxes Has Value

Feb 20, 2014

When I enter values in the userform textbox and press update button i need to copy whole row of data which is next to the textbox from userform to database sheet. (Copy only if data entered in the textbox).

Basically if textbox has a value in userform row 1 and it has a value copy it to database sheet if not skip and if value is in other texbox copy other rows.

The worksheet sample attached : example.xlsm

[URL] .....

View 9 Replies View Related

Userform Label To Display Information From Several Textboxes?

May 10, 2014

I would like to ask if there is a possible way for a Label to display information that are based on multiple textboxes? All the information are based on the textboxes and listboxes that are in the userform and will be displayed on the Label (label16)

userform.png

**Cross reference link: [URL]

View 14 Replies View Related

Copy To Clipboard Only Visible Textboxes From Userform

May 26, 2014

I have a user form where people fill in data into text boxes. some text boxes remain hidden if the user does not need to fill in the requested field. but when the command button is submitted all text boxes hidden or otherwise are copied to clip board.

VBA in order for only visible text boxes to be copied to clip board. I was thinking of some sort of if statement around the vba to copy to clipboard but nothing i use works.

View 5 Replies View Related

Copy Paste Userform Textboxes To Word?

Jun 28, 2014

I have created a userform thats extracts data from a worksheet, pace a command button on the form that will send the info in textboxes to a word document.

I did attempt this but even reading how didn't make sense. I have placed book marks on my doc (RTWdoc) ready. bookmarks are named textbox1, textbox2, etc, for ease of reference so they match textboxes on userform1.

word.doc and workbook are in same folder.

View 1 Replies View Related

Using A String To Reverse Fill Textboxes On A Userform

Apr 27, 2009

I've got a VBA userform with 5 text boxes. When a user selects the cell the userform shows and I want the text boxes to fill each text box from a string in the cell which has a "-" as a seperator.

E.g say the string was "Item 1 - Item 2 - Item 3 - Item 4 - Item 5"

Userform1 Textbox1 would equal the string Item 1
Userform1 Textbox2 would equal the string Item 2 etc

The below works but wondered.

1) Is there a better way to do this.
2) How to count the number of "-" with using the Evaluate Method and a sumproduct formula which I'm doing at the moment

View 11 Replies View Related

Preventing Blank Spaces On Userform Textboxes

Apr 18, 2007

On a userform, I have three textboxes, one listbox, and an OK button. When the user presses the OK button, the information in these boxes is pasted onto a worksheet. I am wondering how I can detect if any of these boxes have been accidentally left empty, so as to prevent the user from pasting an incomplete entry onto the worksheet. This is what I have so far (this is part of the routine that executes when the OK button is pressed):

If EnterGrowerTextBox.Text = "" Then
MsgBox "Please Enter the Grower Name"
Exit Sub
End If
If EnterAmountTextBox.Text = "" Then
MsgBox "Please Enter the Number of Chicks"
Exit Sub
End If
If EnterBreedTextBox.Text = "" Then
MsgBox "Please Enter the Breed"
Exit Sub
End If......................

View 6 Replies View Related

Loop UserForm Textboxes & Copy To Cells

Mar 28, 2008

Loop sequentially numbered text boxes. I have a user form with two sets of text boxes one set named txtN109 through txtN134 the other txtC109 though txtC134. Instead of having to have

ActiveCell.Offset(c, 0) = txtN109
ActiveCell.Offset(c, 0) = txtN110

I would like to loop though the text boxes like I am the offset value.

Do While i <= 134
ActiveCell.Offset(c, 0) = “xtN”& (i)
i= i+1
Loop

Puts txtN110 in the cell. I have tried other ways but always get about the same thing.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved