I have the following code:
[Code]......
Each macro is assigned to its own button, Clear and Restore. What I'm trying to do is make it so that the macro attached to the Restore button will not activiate unless the Clear macro attached to the Clear button is clicked first and visa versa. I can't see to find anthing quite like it in my research.
I have many workbooks that I receive from clients I run various Excel VBA macros on depending on which workbook it is, and I need to automate all of this so that anyone can run an simple .exe user interface designed in VB 2005 Express Edition where when that interface is run, a window opens on the destop with a collection of buttons, when the user clicks one of the buttons, Excel launches, loads the appropriate file and runs an already-existing appropriate Excel macro, then some file maintenance is done, like moving a group of files from one subdirectory to another.
View 9 Replies View RelatedOn a spreadsheet I have a button which has a macro assigned to it, for some reason when I protect the worksheet then then click the button, nothing happens (or though I do get egg timer for a second). but when I unprotect the shet its fine.
ive used this type of method many tiems, and cant see what the problem is, have tried all combination of locking and unlocking cells in and around etc, but nothign changes it.
Running into this issue of "transworksheet macros"
I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.
What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.
I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
This is the macro I am using
Sub Macro3()
'
' Macro3 Macro
'
Range("C2").Select
Selection.Copy
Sheets("Table").Select
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Range("A1").Select
[Code] .....
It does everything I want but take F2 info and send it over. But F3-F6 does go over.
I found this code for a button, so I can collapse and expand a set number of rows within that sheet. It works exactly the way i want it to, however, now I have a second sheet in my workbook, and I used the same button. Problem here is that when I activate the button, it opens the same rows in EVERY sheet in the workbook. "For each ws in Worksheets" so my question is what is the term for it to only work on a certain worksheet?
Code:
Private Sub ToggleButton1_Change()Application.ScreenUpdating = False
Dim ws As Worksheet
With ToggleButton1
If ToggleButton1.Value = True Then
For Each ws In Worksheets
[Code] ........
Other questions is about the ability to send an MS Outlook email from inside of excel.
I've been trying to find something that does the following:
Click button, Form pops up, has drop downs to select recipient, has field for subject, has field for message body, sends email.
I keep getting an automation error in excel 2010 when I click on the button that executes the macro. Excel crashes when the box appears. There is no code in the error box. Why I get this error message.
View 2 Replies View RelatedI have a long complicated macro that processes a ton of data and gives the output in a new sheet. I then want to create new buttons (or some sort of user clickable triggers) on this new sheet that runs another macro.
I have got the actual adding of buttons in the sheet working, but I can't find a way to automatically assign macros to newly generated buttons during runtime. Is this even possible (or are there any clever tricks I could use to get around this?)
I am trying to create a uniform stock database for my company. Thus far, I have 2 worksheets. The first is a face sheet, for the user to interact with. This face sheet has a number of drop down menus on it allowing them to select "Type" and "Size" of the item they need. This information is then translated (by a hidden table) into an item code.
The second sheet contains a list of all the uniform items currently in stock. Each item has its individual code that correlates to the code the face sheet generates.
My question is regarding a search macro.
I want the user to be able to click a command button on the face sheet, labelled "search". This would then take the generated "Item Code" and search for it on the second worksheet. I am aware that it would be very easy for them to simply copy the code into "find" on the second sheet, however it needs to be as easy and quick to use as possible.
what code I can put behind a button so that once I click on that button,
What ever cell i click on, the whole row of that cell will be colored a certain color.
Is this where i would used a target approach?
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
I wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies View RelatedI have this workbook with 10 sheets. Each sheet has macros that are called from a floating toolbar. What I am trying to do:
I want to create a msgbox that warns me when I click in a toolbar's button to call a macro that not runs in the activesheet. Something like: "This code (or macro) doesn't match (or run) with the active sheet.
Is there a way to add a new sheet as soon as click on button on excel sheet with the name i give.
ex : there should be a button on the Index page , as soon as i click on button it should add a new sheet and i should be able to provide a name in the index page for that sheet.
I am using VBA to pull a web query to get sone info from an intranet site.
Unfortunately, the data it pulls is usually old. I've found the only solution is to open a browser manually and to click the Reload button on the web page then navigate back to my workbook and run it again. Then it will pull the most up to date info.
I've tried several ways of forcing a refresh of the data, but have not figured it out yet.
I have been trying the past couple of hours to use the send keys button to tab down to the button on the page I need and to hit enter, thus forcing a refresh, but I can't seem to get that to work either.
I have a spreadsheet with 6 buttons on it. Ive been using the code from Daves Download Page to log users of the spreadsheet, however im now want to log which button is being clicked the most. Is this possible? Ive tried to do it myself, by adding a hidden sheet, and adding code to each button to add a line to the new sheet each time the button was clicked etc, but faield miserably.
View 2 Replies View RelatedIs there any way, through VBA code, to click a button on a sheet in another workbook. This button has a macro assigned to it. What I need to be done is this :- the workbook which has the button is open. The code should click the button on a specific sheet. On this action, the macro assigned to the button should get called.
I could just call the macro which is assigned to the button in this code. But the requirement is that the button click operation should call the macro.
I have found that one can do quite a lot with the code, but this seems to be one a whole different level. I came across a possible solution in the below mentioned link but it doesnt seem to be working for me. [URL]
I need to capture / record a cross country race results in excel. Is the a code already available to log time (per click / press enter) as the runners complete the race and capture their time...?
View 1 Replies View RelatedI've been looking for a way to save a worksheet as a PDF document and place it in a folder in Documents.
View 4 Replies View RelatedI am looking at designing a simple radio button system which allows me to fill an adjacent cell with values from a certain column - so in the example, column C is the total value, and columns D-F will ideally have a radio button which a user can just click to select the value.
View 4 Replies View Relatedonce the command button on sheet 1 is clicked, a input box appears which asks "has this number been entered" and has a place to enter a number within the input box.
Once the info is entered in the input box, it searches through sheet 2 for the number. If the number is found, I would like for a box to pop up with the number found and the name that is next to the number from sheet 2.
If the number is not found, I would like for a box to pop up and say "number not found"
I have a User form which had a button which redirects me to a certain sheet, e.g. If I wanted to go to stock sheet I would click cmdViewStock and it would open the stock worksheet meaning it works, but the userform still stays open. Is there a way in which once I click the cmdViewStock it opens the Stock worksheet but closes the userform automatically straight after?
Here is the current code I have for the button:
Code:
Private Sub cmdViewStock_Click()
Sheets("Stock").Select
Sheets("Stock").Range("B4").Select
End Sub
I have a form that allows users to browse for a file so the location can be stored in a cell. When they select a file the form then creates another area so people can browse for another file. (Similar to an attach a file on an email)
The problem I have is that when I create the next button I don't know how to add a _click event to it.
I'he a button in Excel Userform and i want to open directory using button cliick and put selected directory in textbox1 e.g. i've selected D:Susheel then it will reflect in textbox1
View 3 Replies View RelatedWhen my worksheet is activated, code is executed which defaults the values in my userform controls. The users enter the appropriate data, and with the clicking of a command button, the data is entered into the worksheet. When that is complete, the idea is to return the user to same form, in a default value so they can enter in new data for submission. This will continue until the user selects the Exit button onthe userform.
Code:
...
With wshairport
.Range("A" & llastrow).Value = uf2.ident
.Range("B" & llastrow).Value = uf2.freq
.Range("C" & llastrow).Value = slocation
.Range("D" & llastrow).Value = slat
.Range("E" & llastrow).Value = slong
End With
Application.EnableEvents = False
uf2.Activate
This is resulting in an 'Object doesn't support this property or method.'
I'm not sure about the appropriateness here of the 'Application.Enableevents=False" here. Since the fields of the userform have change events associated with them, I need to disable that what the userform activation code defaults them.
I want to write a macro , which creates a form and once the user double click the form i get a popup message "hello" , but when i run my code i get compile error : Sub or function not defined for the line Sub one().
This is the code on my module:
Sub one()
CommandButton1_Click
End Sub
And this is the code i get when i double click the button
Private Sub CommandButton1_Click()
msg "hello"
End Sub
I want to be able to have a set of buttons or a dropdown menu where i can put all the titles of my columns in.
After clicking on one of the titles the column must hide or show itself, is there a way to do this?
It's for an automated sheet wich contains a lot of information and this will be used by a lot of people, i want to make it easy for people to simply generate a sheet with just the info they need.
For instance if I want to cut a row and column, how do I insert with the keyboard without pasting over other data
View 9 Replies View RelatedI must have disabled right click on the forms button. I usually associate a macro with the button but the menu disapeared. How can I get it back.
View 9 Replies View RelatedI have a User Form that I am trying to open with a button click. I made a copy of one workbook with a new name. The Buttons and Macros were all copied as well. I modified the old Userform so that I can release Version 2 of the Userform, and now when I click on the button in Excel, I get the following error : Object doesn't support this property or method. Run-Time error '438'.
The code assigned to that button is as follows:
Sub Button121_Click()
'
' Button121_Click Macro
' Macro recorded 8/11/2002 by Kale Mayfield
'
UserForm1.Show
End Sub
What am I doing wrong? HELP! Once you have the Userform populated with ComboBoxes,Textboxes, etc., is there now way of making changes to that Userform? If you make changes and rearrange the locations of the buttons and boxes and labels... does that mess up the button in Excel that opens the form to begin with?