I want to write a macro , which creates a form and once the user double click the form i get a popup message "hello" , but when i run my code i get compile error : Sub or function not defined for the line Sub one().
This is the code on my module:
Sub one()
CommandButton1_Click
End Sub
And this is the code i get when i double click the button
Private Sub CommandButton1_Click()
msg "hello"
End Sub
I have a form that allows users to browse for a file so the location can be stored in a cell. When they select a file the form then creates another area so people can browse for another file. (Similar to an attach a file on an email)
The problem I have is that when I create the next button I don't know how to add a _click event to it.
I have a UserForm with 2 command buttons.
The first Command Button ( called CommandButton22 ) displays the result of some other calculation as its Caption ... this caption will therefore be changing from time to time.
I would like the second Command Button (called EnterButton ), when clicked, to send the caption from CommandButton22 to whatever cell on the active spreadsheet the user clicked into just prior to clicking on the 'EnterButton'.
I would like each time that I click on the 'EnterButton' for the Caption in CommandButton22 to be sent to the next cell down and so on and so on etc.
I have this code that ideally should change font color in usedRange to red upon button click. The problem is it's not working and I've been pulling my hair out all day (not that there's much left of it)
HTML Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim UsedRange As Range
Dim cel As Range
[Code]....
and the related "End If" this works i.e. if I click on any cell within respective sheet font in used range all changes to Red but I only want this to change on CommandButton1 click which I have inserted in sheet.
Need a method for launching the color palette from a Button Click event so that the palette opens, the palette may be used to set a color, then have the color palette return the Long INT color value to the calling click event routine?
View 3 Replies View RelatedI have five worksheets among eight total in my workbook that I use as a report. I would like to have a button that copies those five particular worksheets into a new workbook and pastes all numbers as un-linked values. This would save me a TREMENDOUS amount of time generating my reports every month.
View 3 Replies View RelatedI want to catch the click event on "Increase Indent" commandbar button.
I have this reference- http://msdn.microsoft.com/en-us/libr...ffice.10).aspx
But not able to execute properly:
Till now I have generated below
Class Module "clsCBEvents"
Public WithEvents colCBars As Office.CommandBars
Public WithEvents cmdDecreseEndent As Office.CommandBarButton
Private Sub cmdDecreseEndent_Click(ByVal Ctrl As Office.CommandBarButton, CancelDefault As Boolean)
MsgBox "Hi"
End Sub.............
Running into this issue of "transworksheet macros"
I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.
What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.
I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.
what code I can put behind a button so that once I click on that button,
What ever cell i click on, the whole row of that cell will be colored a certain color.
Is this where i would used a target approach?
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.
View 6 Replies View RelatedI am creating a spreadsheet that has various form controls, etc... in it and I wanted to create a "help" macro. I have a small Question Mark icon and I want the user to be able to click the icon and have little text boxes appear on the excel sheet with instructions.
I was wondering instead of making a toggle event where the user clicks once to turn on and again to turn off, if there was a way that the user could click and hold on the icon to make my text boxes visible....and when the user releases they disappear.
How do I run code if I click on a cell in the workbook, like Cell A1 of Sheet1?
So far I just have...
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Stop
End Sub
1. I would like to trigger an event once i click on a cell, for example I click one click on a cell (1,1) and it run some macro.
2. When I bring my cursor to this cell, to change cursor pointer to pointer like in hyperlink.
I have set double click event to open my userform.
It opens normally, but when I try to close It, It opens again. After that I can close It normally.
I checked Userform code, but can't figure out why event triggers twice. What's wrong ??
This is my double click code :
[Code] ......
I have some rows in my sheet locked and some unlocked rows. When user clicks on a unlocked row I should be able to enter some information. I am suppose to populate some dropdowns in that row for him to choose. How can this be done??
I know when a user clicks a row worksheet change event is call. I can write a function in the worksheet change event to populate values in the dropdown. I went through some articles, and they say it can be done by hiding and unhiding rows.
I currently have a set of ListBox controls on a worksheet tab. They are all configured as multi-select and i have the values populated via the ListFillRange properties. Each listbox has an '{All}' option; when the user clicks on this value I want to de-select all other previously selected values. The code for this is straightforward enough, but I cannot get it to fire using the _Click event. Why this is not working?
Additionally, I attempted to use the _Change event but quickly got caught in recursive loops which obviously is not going to cut it.
I would like to create a macro in which, when the user double clicks on a cell, that cell will be shaded yellow and other cells within the Workbook containing the same value as that cell will be crossed out. I have come up with the below code, but it doesn't work correctly. Any ideas on what I have done wrong? Would also like it to not cross out the cell the user double clicked on.
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
Dim wk As Worksheet
Dim selectedName As String
selectedName = ActiveCell.Value
With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
For Each wk In ActiveWorkbook.Worksheets
For i = 200 To 2 Step -1
If ActiveSheet.Cells(i, 2).Value = selectedName Then
ActiveSheet.Cells(i, 2).Font.Strikethrough = True
End If
Next
Next
End Sub
[/code]
I am working with a large legacy file/program which has a lot of issues. Foremost, and unfortunately this cannot be changed, is that all of the controls were placed directly on the worksheets instead of on Userforms.
I had previously posted code from the legacy file which may have been excessively complicated. So I edited my post to this simple example. Sheet1 has one textbox and one command button. Sheet 2 is blank.
If Sheet2.Activate is commented, everything works fine. If Sheet2.Activate is executed, then Excel crashes....
I ask because I would like to change the value of a cell within A:A to TODAY() if the user right clicks on it - or with some keyboard combination.
View 9 Replies View RelatedI use a CommandButton on a UserForm to copy the contents of 12 TextBoxes into the last row on a sheet. I am getting numbers with too many places. I tried to use Round(), but it is not working.
Here is the original With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i).Value = Me.Controls("TB" & i + 4).Value
Next i
End With
This gives me all of the decimal places.
Here is my attempt to use Round():
With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i).Value = Round(Me.Controls("TB" & i + 4).Value)
Next i
End With
This gives me a type mismatch error.
code to have check marks appear in multiple non-adjacent columns in a worksheet by double clicking.
The code I am using works for a single column : (The named range "Checkboxes1" is D4:D100)
VB:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Target.Count > 1 Then Exit Sub
If Intersect(Target, Range("Checkboxes1")) Is Nothing Then Exit Sub
[Code]......
However I also need the code to work on two other named ranges "Checkboxes2" (E4:E100) and "Checkboxes3" is G4:G100.
I am trying to apply a double click event to all sheets. It works if I apply to each sheet but I won't to prevent from having to copy and paste into each new sheet. I am trying this code in ThisWorkbook but doesn't seem to work.
VB:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
' If the cell is clear
If Sh.Target.Interior.ColorIndex = xlNone Or Sh.Target.Interior.Color <> vbCyan Then
' Then change the background color to yellow
Sh.Target.Interior.Color = vbCyan
[Code]....
I am trying double click event.
Code is as follows:
[Code] .....
Not getting there yet.
Is there a way that when a cell is clicked in a worksheet. that I can get a user form to open?
View 9 Replies View RelatedI have a Shared Workbook that 10 or 15 users are in and out of all day. In Column A on a few sheets I have a Before Double Click Event that launches a userform. The macro works for all users except this one person. I have tried several things:
1. I closed the file and Reopened it, to make sure that the user did not disable macros.
2. I checked the file on other users computers to see if the file was working properly (It was.)
3. I went to Options>Trust Center>Trust Center Settings>Macro Settings and Enabled All Macros on this User's system
None of these actions corrected the issue.
The purpose of the BeforeDoubleClick Event is to store Columns A:E data and then let the user add more information through the form. Once the User fills out the UserForm. A:E is transferred to one of a number of sheets depending on criteria in the UserForm. A:E is transferred along with the new information that the user has entered in the UserForm.
Another symptom is that on other computers when the Before Double Click Event is activated the Userform launches and the cursor does not appear in the cell until after the User Clicks a Command Button to Update Data on the Userform. On this individual's computer the cursor does appear in the cell without the Userform launching....
what im trying to do is to copy only the last 7 characters in column A:A
when i dubleclick on a cell.
example:
if i click on a cell that has "8peu99s8a" i want it to copy only "eu99s8a" wich is the last 7 characters, and then i will past the data to another program i use.
this code will only apply for any cell in column A:A
I am working with a large legacy file/program which has a lot of issues. Foremost, and unfortunately this cannot be changed, is that all of the controls were placed directly on the worksheets instead of on Userforms. The actual code from the legacy file is excessively complicated, so I created this simple example. Sheet1 has one textbox and one command button. Sheet 2 is blank. I want to be able to click the command button or use the Enter key on the command button, to trigger the Click Event. Clicking works fine. When using Enter, if Sheet2.Activate is commented, everything works fine. If Sheet2.Activate is executed, then Excel crashes.
Private Sub TextBox1_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Dim bBackwards As Boolean
Select Case KeyCode
'Only look for tab, return, down arrow, up arrow
Case vbKeyTab, vbKeyReturn, vbKeyDown, vbKeyUp
Application. ScreenUpdating = False
'Do we need to go back to previous control
bBackwards = CBool(Shift And 1) Or (KeyCode = vbKeyUp)
If bBackwards Then TextBox1.Activate Else CommandButton1.Activate
Application.ScreenUpdating = True
End Select
End Sub
Private Sub CommandButton1_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Dim bBackwards, bForwards As Boolean
Select Case KeyCode
Case vbKeyTab, vbKeyReturn, vbKeyDown, vbKeyUp
Application.ScreenUpdating = False...................
filling a textbox from a cell using a label click event. I have attached an example.
View 2 Replies View RelatedMy program(which is an add-in, or will be when I've finished writing it) creates a new worksheet called "Groups Summary" I would like this sheet to be locked so that the user can not modify anything on it. I would also like that if they double click a cell this will launch a userform if based on certain conditions.
I believe this code would have to go in the worksheet itself, so the question is how do I get the macro to enter code into a worksheet that it creates?
Is there a way to write it in a standard module and then automatically copy it when the worksheet is created?