In sheet1, The cursom must move only following cells
A2,A5, C10 C15, D15, E50
Besides this the cursor should not move to any cell.
It must remain between the cells that I described above.
Is there a way to make it so when i hit enter my cursor moves 7 cells instead of 1?
View 9 Replies View Relatedto make cursor to move only on the selected cells.
E7, O21, O22, O23, O24, Z23, Z24, Z26, Z27, Z28, C26, C27, C28 ...
I am wanting VBA language in a macro that will move the cursor a certain number of cells in a certain direction. For example, I want the cursor to move right one cell, no PARTICULAR cell, just right one cell. Is there something I can use?
View 6 Replies View RelatedI want to move the cursor in my spreadsheet from cell to cell in a particular order. I've tried the following code, but it only works when I change the value in the cell.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Select Case Target.Address()
Case "$A$1"
Range("$F$5").Select
Case "$F$5"
Range("$B$12").Select
Case "$B$12"
Range("$A$6").Select
Case "$A$6"
Range("$A$1").Select
End Select
End Sub
I want the cursor movement to follow the same order even when I don't change the cell value, for example, when I repeatedly hit the "Enter" key without altering the existing cell value.
I am developing an invoice templet and would like to define the specific movement for the cursor from cell to cell. I searched the forum and found the following in another thread:
This routine should do what you want. You should set your options/preferences to " move selection after enter"....
I want to do a arrangement for a file like this " wherever cursor moves in excel that particular cell will highlight with color and once it goes to some other cell that last highlighted cell will come as a ordinary cell"
View 5 Replies View RelatedI've exhausted my search engine skills and I'm about 99.9% sure Excel is incapable. This message board has been great over the years of figuring out even the trickiest of problems, but is there any functionality in 2003 or the slight possibility that after a user inputs a number in a cell (no tab, no enter) that it will move to the next cell.
After reading about this, most people say it is not possible even with VBA or Macro, and I certainly believe it, but the whiny, and horrible department that I work for are curious if this is possible. So, is it? If this is the wrong area for this questions, I apologize, I was considering putting this in the Macro/VBA area, but I gave up in deciding where to post this.
I want to be able to enter a single digit figure into a cell and have the cursor move automatically to the next cell to the right. then enter a figure in there and have it do the same thing. is this possible and, if so, how?
View 2 Replies View RelatedI have a sheet with 56 columns with locked columns every 6 or 7 columns.
The rest of the sheet is unlocked for data entry.
What I would like the cursor to do is when it reaches a locked column, drop to next row instead of moving to the next free cell in the row.
Data entry is from left to right first six columns starting at C8 to H8
Next is L8 To Q8 and so on for 56 columns
When cursor reaches H8 I want it to drop to C9 or whatever column I'm entering into Q8 to L9
I need a macro which will put "P" when the cursor will be moved by right arrow key in the range c19 to AG55 if the cells are blank suppose cursor is moved from c19 to c20 & if c20 is blank then "P" will come on, if c20 is not blank say "Z" is in c20,then at c20 "Z" will remain at c20 and the code will not put "P" at c20 then.
View 9 Replies View RelatedI need to change the way Exel move the focus when I press return in a cell. For example when I am in column 1 and press return, I want the focus to move to column 4. If I am on column 5 I need to go on the first column of the next line, etc ...
I think I am suppose to use ActiveCell.Offset(1,0), and ActiveCell.Offset(-4,1) for my 2 examples. But my question is what is the VBA code for: "do that when I press enter and I am in this column"?
I'm looking for code that will move the cursor after the "enter" key is pressed through specific cells/order listed in the code, which can be changed as required. Using the option/tools cursor movement affects all excel documents which we don't want - just the specific sheet we are working in.
View 5 Replies View RelatedI have a code that works fine, however only uses one cell as a trigger. I need each cell in column M to run the code, so at the moment only M6 will trigger, and not M7.
[Code] .....
Is there some possible way to control-C type copy a range from a sheet, then paste it duplicating everything from the original cheet; i.e., exact same cell references as are in the cell formulas?
I am suspicious it is right in front of me and I can;t see it, but I have run through all the special pastes that I could from the left-click paste sub-menus and I can not find it!
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies View Relatedwhen i position the cursor over a cell, i get muliple cells highlighted. i enter data and it is entered in the cell i want but the others being highlighted is confusing. i checked and i am not in extended mode.
View 9 Replies View RelatedThe VBA code (in the code window) runs nicely on the range B10:B1000, but I'd prefer that it only run on a range I define by the cells that are currently highlighted/selected on the active sheet. How should the line of
Set SHOPS = Range("B10:B1000")
I would like to change the mouse cursor when the pointer passes over (without clicking) some cells which have double-click-event script attached.
I know how to change the cursor with a custom one. The pb is for me to identifie that the pointer is over the cell so as to launch the cursor change macro (and reverse when going over another cell).
Excel does that, for ex, with commented cells but can VBA do it also?
I keep running into this error when I try to create a pivot table.
The debugger highlights the following line:
Trying to convert an Excel 2003 macro to work in Excel 2007.
The problem line is
Dim MyDataObject As DataObject
I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing
Microsoft Forms 2.0 Object Library
Is this the one it needs? It is called something else in 2007?
The ones I do have ticked are
Visual Basic For Applications
Microsoft Excel 12.0 Object Library
OLE Automation
Microsoft Office 12.0 Object Library
Microsoft ADO Ext. 2.8 for DDL and Security
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.8 Library
Microsoft Scripting Runtime
Microsoft XML v2.6
'Code1
Call movedata(1, rrow, ecol, erow)
'Contact Person
Call movedata(26, rrow, ecol, erow)
Worksheets("new").Activate
Worksheets("new"). Range(Cells(erow, ecol), Cells(erow, (ecol - 2))).Font.Bold = True
'Name
Call movedata(2, rrow, ecol, erow)
'Street Address
Call movedata(3, rrow, ecol, erow)
'city
Call movedata(4, rrow, ecol, erow)
' zip
Call movedata(5, rrow, ecol, erow)
Worksheets("new").Range(Cells(erow, ecol)).Font.Bold = True
' speed dial
Call movedata(6, rrow, ecol, erow)
the first time font.bold is set to true, it completes w/o error. The bolded line returns 'application defined or object defined error 1004'. Ive tried activating the new sheet immediately before setting bold (like the first time it gets set) but it still errors.
Trying to add a named range at run-time
Here's what I have so far ...
I have problems with setting Validation input title and message. When in column "C" I type product code, data validation of corresponding cell in column "D" changes to list of diameters allowed for that product. That works fine. But i also want to set validation message to show allowed diameters.I set it in VBA using named ranges.
But for every second line (13, 15, etc on attached file) I get an application-defined or object-defined error. The rest (14, 16 etc) works ok.
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application
'
' do nothing for now
'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
I have a very strange problem in DEBUG mode, because i get this error "Application-defined or object-defined error" when referring to a cell and assigning it a value so it goes to my error handler and i have a Resume Next there. It continues to go through the code whilst continuing to go to the error handler but when i step out of the function it restarts again from the beginning on the called function and then on the second run of my code it seems to WORK!?! So i'm thinking what the hell is going on, it falls over and fails the first time round and works the second time round?
In free-run mode from excel i just get a #VALUE!
I had to change sheet one but everytime I open this workbook, it keep saying "Application-defined or object-defined error"
but I cannot find what is causing the bug. I have checked the name of sheet and it seem correct for me in the codes.
I am having some trouble with a variable range selection within a regression. I keep getting an "application-defined or object-defined error." I've isolated each statement to find that the code that is causing the regression not to work is below (the error for that line of code states that the Select method of Range class failed):
View 6 Replies View RelatedI'm trying to enter a series of formulas into a worksheet using vba. However, this code is giving me Run time error '1004', along with the description in the title. This is the first formula (they're all relatively similar).
View 2 Replies View RelatedI have a sub that takes the value of a cell and get the hour by using
mhours = Hour(KRT)
then using DateAdd I need to subtract the mhours from etd
and Im getting this error
Application-Defined or Object-Defined Error
Worksheets(b).Range("G" & q).value = DateAdd("h", mhours, etd)
Note: KRT and ETD are dim'd as Date
Note2: DateAdd returns the same error wether mhours is postive or negitive
