I need a macro which will put "P" when the cursor will be moved by right arrow key in the range c19 to AG55 if the cells are blank suppose cursor is moved from c19 to c20 & if c20 is blank then "P" will come on, if c20 is not blank say "Z" is in c20,then at c20 "Z" will remain at c20 and the code will not put "P" at c20 then.
View 9 RepliesI am wanting VBA language in a macro that will move the cursor a certain number of cells in a certain direction. For example, I want the cursor to move right one cell, no PARTICULAR cell, just right one cell. Is there something I can use?
View 6 Replies View RelatedI want to move the cursor in my spreadsheet from cell to cell in a particular order. I've tried the following code, but it only works when I change the value in the cell.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Select Case Target.Address()
Case "$A$1"
Range("$F$5").Select
Case "$F$5"
Range("$B$12").Select
Case "$B$12"
Range("$A$6").Select
Case "$A$6"
Range("$A$1").Select
End Select
End Sub
I want the cursor movement to follow the same order even when I don't change the cell value, for example, when I repeatedly hit the "Enter" key without altering the existing cell value.
I am developing an invoice templet and would like to define the specific movement for the cursor from cell to cell. I searched the forum and found the following in another thread:
This routine should do what you want. You should set your options/preferences to " move selection after enter"....
I want to do a arrangement for a file like this " wherever cursor moves in excel that particular cell will highlight with color and once it goes to some other cell that last highlighted cell will come as a ordinary cell"
View 5 Replies View RelatedI've exhausted my search engine skills and I'm about 99.9% sure Excel is incapable. This message board has been great over the years of figuring out even the trickiest of problems, but is there any functionality in 2003 or the slight possibility that after a user inputs a number in a cell (no tab, no enter) that it will move to the next cell.
After reading about this, most people say it is not possible even with VBA or Macro, and I certainly believe it, but the whiny, and horrible department that I work for are curious if this is possible. So, is it? If this is the wrong area for this questions, I apologize, I was considering putting this in the Macro/VBA area, but I gave up in deciding where to post this.
I want to be able to enter a single digit figure into a cell and have the cursor move automatically to the next cell to the right. then enter a figure in there and have it do the same thing. is this possible and, if so, how?
View 2 Replies View RelatedIn sheet1, The cursom must move only following cells
A2,A5, C10 C15, D15, E50
Besides this the cursor should not move to any cell.
It must remain between the cells that I described above.
I have a sheet with 56 columns with locked columns every 6 or 7 columns.
The rest of the sheet is unlocked for data entry.
What I would like the cursor to do is when it reaches a locked column, drop to next row instead of moving to the next free cell in the row.
Data entry is from left to right first six columns starting at C8 to H8
Next is L8 To Q8 and so on for 56 columns
When cursor reaches H8 I want it to drop to C9 or whatever column I'm entering into Q8 to L9
I need to change the way Exel move the focus when I press return in a cell. For example when I am in column 1 and press return, I want the focus to move to column 4. If I am on column 5 I need to go on the first column of the next line, etc ...
I think I am suppose to use ActiveCell.Offset(1,0), and ActiveCell.Offset(-4,1) for my 2 examples. But my question is what is the VBA code for: "do that when I press enter and I am in this column"?
I'm looking for code that will move the cursor after the "enter" key is pressed through specific cells/order listed in the code, which can be changed as required. Using the option/tools cursor movement affects all excel documents which we don't want - just the specific sheet we are working in.
View 5 Replies View RelatedI have a code that works fine, however only uses one cell as a trigger. I need each cell in column M to run the code, so at the moment only M6 will trigger, and not M7.
[Code] .....
Is there a way to make it so when i hit enter my cursor moves 7 cells instead of 1?
View 9 Replies View Relatedto make cursor to move only on the selected cells.
E7, O21, O22, O23, O24, Z23, Z24, Z26, Z27, Z28, C26, C27, C28 ...
I have written code for a userform, and after I enter in valid data, the cursor will not move on to then next field. I cannot even click on another field with my mouse. I changed some of the code around to add validation to it, and now I am unable to move on once a valid entry has been made. If the user enters in the value "9999" the userform works just fine, it only freezes when they attempt to enter in an employee number. I've tried a few different ways to resolve this, but nothing is working. This is the code I have written.
[Code] .....
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies View RelatedWhen I add a text box in Excel 2007, when I type the text box, instead of the cursor moving forward as I type, the cursor stays in the same place and the text moves backwards.
when I try and navigate back through the text, pressing right will make the cursor go left, pressing left will make the cursor go right
Is there a way to make the text cursor appear at the start, as opposed to at the end, of a cell when pressing F2 to edit it?
View 3 Replies View RelatedI'm in a text box in Excel 2010. I need to find the current cursor position in the line of text in the box - using VBA.
View 2 Replies View RelatedIn Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedIs it possible to make a textbox entry be a number.
I have a text box on a sheet and i have linked it to a cell on a different sheet.
The problem I am having is that when I enter a number in the text box say 2.8 it is stored in the linked cell as text. is it possible to have the entry be number as I need it to be a % and used in other formulars?
I have often used Data Validation List to create selection lists for cells in a worksheet. The problem is the list has to be on the same sheet you want to use it on. Is there any other way to do this so one common list can be used for all sheets? I have a list of accounts I want to use on 12 different Monthly tabs.
View 5 Replies View RelatedI have a form in Excel that has comments fields. Each comments field is a merged cell consisting of four rows and four columns. My understanding is that Excel should be able to display 1024 characters. The input that's causing me trouble has 360 characters. At around 300 characters, the text box gets filled with ############################# instead of text.
If I size the font down significantly to where there would be absolutely no question that the text would fit, it is still #######. I may have to end up using text boxes, but they are a bit troublesome for the less Excel-savvy users of the form.
I am having is on the user form I have a default start time test box and a default finish time text box that when the form is opened it looks at the constants work sheet and if there is any data it puts it into the appropriate text box, all ok so far when a user wishes to change the default data in these text boxes I need to test if they are entering the data correctly, in Access 2000 I would set the defeat format of the text box to Time? Data type=Format(time,”h:mm”) or a or an input mask of “h:mm” so if they did not enter the time in the correct way an error message would pop up and tell them to renter the data the correct way.
I have not been able to find this type of settings in Excel 2000 I have tried testing the data using the beforupdate but it also dos not recognise formatting
The other thing I need to do on the user form with this formatting is calculate the time difference between to two time inputs and come up with a total hours.
I have managed to do all of this in the work sheets and preforms well but not on the user form
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I've a long list of value with indicator which I need to compare with an entry after which it need to return a text indicator. I'm using IF and MATCH function.
Following is the code I use:
=(IF(MATCH(C1,$D$5:$D$29,0)<=5,$E$9,IF(MATCH(C1,$D$5:$D$29,0)<=10,$E$14,IF(MATCH(C1,$D$5:$D$29,0)<=1 5,$E$19,IF(MATCH(C1,$D$5:$D$29,0)<=20,$E$24,IF(MATCH(C1,$D$5:$D$29,0)<=25,"Not Found"))))))
I've attached an excel file with an sample. Btw, Is there anyway I can omit the length of IF & MATCH function by using other function.
I am relatively new to Excel. I have figured out how to use named ranges as lists and use INDIRECT Data Validation to have a list's selection made in one cell populate a new list in an adjacent cell.
A1 contains a list of "Characters" (The choices are "Numbers", "Letters", or "Other")
Based on the choice in A1, B1 has to populate with the following:
- A list of available Numbers to chose from (1,2,3..etc)
- A list of available Letters to chose from ( A,B,C...etc)
- Text that instructs the user to enter text into the cell manually
(For example, their "Other" character might be something like "@#$%^&*!". (Not unlike my mental state trying to figure out this problem.) I want them to see the instruction to "ENTER CHARACTERS HERE" and then be able to type in the cell.
So I need B1 to either populate with a menu that is dependent on the menu selection in A1, or allow for free text entry depending on if they chose the "other" option in A1.
way to set the format of an entry made in a txtbox (on a user form)
I have a txtBox that the user enters an amount, but when this is pasted in the excel workbook the number is stored as text and won't evaluate.
I've tried changing the formats... but the option to change teh valuse from txt to numberinc is not "codable"...
I have a date in H34, 21/03/2009.
In I34 I have the same date again, except formatted as MMMM YYYY so its showing "March 2009".
In G10, I want the cell to read: Number at end of March 2009, with the month and year being taken from the date range. To be honest, I can get the year okay using the Year() function but cant get the month as cant convert it back from a numeric.
I currently have showing 800 suppliers in a List Box... sadly when having to search for a sepcific supplier this seems to be very fustrating and time comsuming for people in the Company.
I have tried the method of copying all of the Supplier above the list, so it can do an AutoComplete filter, but the data needs to be exact.
What i would really like is if i was to type the letter "V" in the cell, it would be able to provide me with a list of the "V" suppliers in a list.