when i position the cursor over a cell, i get muliple cells highlighted. i enter data and it is entered in the cell i want but the others being highlighted is confusing. i checked and i am not in extended mode.
View 9 RepliesIs there a way to make it so when i hit enter my cursor moves 7 cells instead of 1?
View 9 Replies View RelatedI am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies View RelatedIn sheet1 there are three columns
A1 : PO Number (for example 111001)
B1 : PO Line (for example line # 91)
C1: Amount ( USD 50.00 )
In Sheet2 there are three columns also
A1 : PO Number (for example 111001)
B1 : PO Line (for example line # 91)
C1 : Account Code ( For example AA.00.000,725001)
Now, I would like to use a function that brings the value of C1 in sheet 2 ( The Account Code) to d1 in sheet1 taking into consideration that the PO number may repeat but the line numbers is not repeating for the same PO. Attached is a sample for better illustration
cell AT7 is a formula which brings back a numerical value i.e. 15.
in cell AS7 i need a formula that displays the value of cell AT7, as long as that value is less than 15, if the value is 15 or higher then 0 should be displayed.
I dont know why i cant get this, seems like a simple IF statement to me, but who knows.
Once this formula is done i need to drag it down about 2500 cells and autosum to get a column total...
I have several thousands lines of data....much of the data is the same, 2-5 rows per person, but at the last two columns is different numbers/totals....I'd like to get those all into their own column so that each person has one row with all the data...I USUALLY would sit and sort by each total, shift them over to the right into their own columns, then sit and shift them all up to one line...but thats a carpal tunnel project and i know there must be an easier way....subtotalling brings the numbers down to one line once I have shifted each one over, but not the rest of the data....
Pic Attached: Excel problem pic.JPG
In sheet1, The cursom must move only following cells
A2,A5, C10 C15, D15, E50
Besides this the cursor should not move to any cell.
It must remain between the cells that I described above.
The VBA code (in the code window) runs nicely on the range B10:B1000, but I'd prefer that it only run on a range I define by the cells that are currently highlighted/selected on the active sheet. How should the line of
Set SHOPS = Range("B10:B1000")
to make cursor to move only on the selected cells.
E7, O21, O22, O23, O24, Z23, Z24, Z26, Z27, Z28, C26, C27, C28 ...
I would like to change the mouse cursor when the pointer passes over (without clicking) some cells which have double-click-event script attached.
I know how to change the cursor with a custom one. The pb is for me to identifie that the pointer is over the cell so as to launch the cursor change macro (and reverse when going over another cell).
Excel does that, for ex, with commented cells but can VBA do it also?
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
I'm talking about the little black box that appears anytime you put the mouse on a cell, or drag the mouse around a group of cells - mine doesn't show up. I can still edit the cell, but I have to guess about which cell I am on.
how to make my dear cursor reappear?
I try to move the cursor using the keyboard arrows it stays on the cell it is on and the whole spreadsheet page moves across the screen in the direction of the arrow. So how do I restore cursor movement to the arrows.
View 3 Replies View RelatedHow do I make the cursor jump down to the next row. Example: once I entered value on H2, I would like the cursor jump down to A3 then once I reach H3, the cursor would jump down to A4 and so on.
View 5 Replies View RelatedFor many projects I work on I use listviews in forms, this time I thought I'd try something different.
I've created a scrollable frame with dynamically added controls and have started creating their events in a class module.
Here is the problem I now face. If I create for example a label at design time I can click on the MouseIcon property and navigate to the "hand.cur" file I have.When dynamically creating the label control I have been able to reference to the file by using:
Code:
.MouseIcon = LoadPicture(ThisWorkbook.Path & "hand.cur")
What I've now done is embed the file on a worksheet, but hat the correct syntax is to refer to it. I've come up with the following but it doesn't work:
Code:
.MouseIcon = LoadPicture(ThisWorkbook.Sheets("Objects").OLEObjects("Object 1"))
Am I on the right lines or am I completely off the mark.
I received this code from the board about a month ago. It works perfectly to highlight the row the cursor is currently in but, has one flaw. Once you place this code in the sheet module and the code initiates, it will "erase all other highlight colors" within your sheet. Is there a way to correct this problem?
Here is the code;
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Cells.Interior.ColorIndex = xlNone
With Target.EntireRow.Interior
.ColorIndex = 37
.Pattern = xlGray25
.PatternColorIndex = 24
End With
End Sub
how I can move the cursor position on all visible worksheets to A1 before a workbook is saved.
View 9 Replies View RelatedI am wanting VBA language in a macro that will move the cursor a certain number of cells in a certain direction. For example, I want the cursor to move right one cell, no PARTICULAR cell, just right one cell. Is there something I can use?
View 6 Replies View RelatedUsually when I select a number of cells with my cursor excel adds up the cells and shows a total on the bar. It's stopped doing this now and will only show the 1st cell showing "max=No"
View 3 Replies View RelatedI have created a simpel userform that shows sales total and it is activated [.show function] whenever an entry is made in the order column. All of this works fine.
The only problem I have is that the curser jumps in to the text box and doesn't return to the order column where next entry needs to be made.
How do you move the curser out of the userform, back to the activesheet?
Ideally it should move to the next cell for the user to make entry.
I am attaching my sample file here. It has some odd things that I was just playing around with as learning experience. But the main question is how to control the curser.
I was able to input barcode reader data into A1, and automatically get the date inserted into B1. I wish the next activecell to be C1, instead of A2 as the above code is doing at the moment - so how do I alter the code above to make this happen?
View 3 Replies View RelatedI have a for which consists of
2textbox
1 listbox
1 textbox.
While entering the data, the cursor does not stop in the list box and goes directly goes to the next textbox. Autotab is set to true.
i have faced a problem i want to draw straight connector using code imagine when you select straight connector to draw line mouse cursor changes when you move it to a node i want to do this with excel vba code without going to shapes and selecting connector.
View 5 Replies View RelatedI would like to change A1 cell's Interior.ColorIndex to red color and A1's font format to Italic, while mouse cursor on top of A1 cell.
Can i do it with a VBA code or any different way to do it?
For example:
Sub CursorOnA1()
If MouseCursor OnTopOf [A1] Then
With [A1]
.Interior.ColorIndex = 3
.Font.Italic = True
End If
End If
End Sub
the code to get my cursor to move down 1 row or cell without it actually referencing the chosen cell.
I have a workbook that contains spreadsheets that serve as input sheets to generate reports (other spreadsheeets within the workbook). I did not create user forms as I find them cumbersome to do so. Instead I formatted the input sheets to be extremely user friendly. I protected the sheets so that user can only access the unlocked cells that require inputs.
Question:
Is it possible to control the movement of the cursor by both tab and enter like is done in the user forms. The input cells are spread out in various locations on the spreadsheet - therefore, I would like to drive the direction of the cursor as to what cell to go next after an input is made and entered by either hitting the enter button or tab button.
is there a control for placing the cursor at the beginning of a large amount of text in a userform testbox.
evertime i run the userform the cursor is at the last entry so the user has to scoll up to read?
Is there a code to make the Cursor Movement direction to be set to move Left ?
View 2 Replies View RelatedExcel Sheet Description:
My Excel sheet is a check list inventory and is arranged in three, two column matrix.
The cells are expecting an integer rating (1-5).
Problem Description:
What I would like to do is enter my integer rating in a cell in a column and then automatically have the cell selection advance once to the right and then down to the next row until all the cells have been filled with there integer ratings.
I would like to do this without having to hit the enter or tab key.
I know this will probably be a simple thing, but how do I write in code the function cntl Home and then arrow down to take my cursor back to the top of my worksheet?
View 3 Replies View Related