I am trying to write a formula whether it be in VBA or a Macro that will do the following.
In cell A7 and A10 there are validation boxes that drop down with a list of items that can be selected.
We want the user to be able to add multiple items under each month but keep the list to only what is needed. Therefor the function I am trying to get is once cell A7 has a selction or isnot blank or is greater than 0 we want to add a line directly below it with all the same functionality as line 7. Everything else will shift down and maintain the same functionality.
I have a attached a sample workbook... Can this be done
So I am trying to make a file that when opened will act as a template does and change the file name on start-up.
Typically, the template changes the file name by appending one number (e.g. "Book Template REV 1.1.xltm' upon opening would change the file name to 'Book Template REV 1.11.xlsx'). What I want to do, however, is to custom the name change so I could use the file 'Book Template REV 1.1.xltm' while having it change the file name upon opening to 'Custom Name 567.xlsx', without a user being notified of the change (since typically when a template opens the file, the user has no notification that the file name has changed ever so slightly).
I have created a nice custom menu but I only want to tie it to only appear when I open a specific template file or any other saved work book from the template file.
How can I save a new xlt or xls so that the toolbar settings I am viewing will always reload with excel. I have tried purging all items from my xlstart locations, but unwanted (and unchecked) toolbars keep reappearing when I restart excel.
I created a custom toolbar button which works perfectly.
Because I needed to save each workbook as a specific workbook this is taken care of by the vb code.
I would like when the button is pressed for the original workbook template to be opened.
At this moment if I have a blank workbook or no workbook open and I press the button the programme opens a version of the workbook but not the template version how do I point Excel at the templates.
I feel I've searched thoroughly and wasn't able to find the right answer. I've attached a daily report example that needs the "Product" field to be sorted in a particular order. The order should be JEX, Q3791J, YOO5, KLX9, GHT (all similar products need to be grouped together).
Since the report is run daily the number of rows changes daily: one day can have 50 entries and the next 10. Is there a way to dictate the sort order and insert a blank row between each product grouping?
Once the Products have been separated into their groups, how would I sort each grouping by the "Term" column?
I need a code to sort worksheets in a huge workbook. Is this technically possible!?
The information containing the worksheet order is available in worksheet "Aux", column A contains the rank (1,2,3,...etc.), whereas column B contains the corresponding worksheet names.
I am trying to create custom sort list. It works below when I define range as A1:A79.
Sub SortWS2() Dim SortOrder As Variant Dim sheetsorder As Range Dim Ndx As Long Application. ScreenUpdating = False With Worksheets("Sort Order").Range("A1:A79") For Ndx = .Cells.Count To 1 Step -1 Worksheets(.Cells(Ndx).Value).Move before:=Worksheets(1) Next Ndx End With Application.ScreenUpdating = True End Sub
I have created a dynamic range called sheetsorder. If I revise my code it does not work.
I Have A List That Is Generated From Another Program Dump Info Into Excell. This List Has Names In One Colun And Corresponding Values In The Next Column. My Goal: Get The Name And Values To Be Listed In A Specific Order To Be Copied To Another Workbook. Issue: All The Names Do Not Always Get Sent From Original Program. Example:
Person1 Always Needs To Be In Row2 Person 2 Always Needs To Be In Row3 Etc However Person1 May Not Be On The List Today. In Which Case I Need Row2 Blank
I would like to sort my column A by "Urgent, High, Medium and Low". However, when I click on sort, it obviously sorts alphbetically. Need to code to sort all colums A:K.
Is it possible to do a custom sort on a column so that I can change the order the way the months are sorted. The order I'm looking for is:
October November December January February March April May June July August September
Also the format for the cells in that column is 01-Jan, I don't want to see the year because I enter and sort the date as if the year doesn't matter so it automatically registers as 2014, if that makes sense. Basically I want that order of the months regardless of the year.
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
I have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):
Macro 1: clears order Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.
It's the Macro 2 I want to edit.
I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.
Row 1 to 11 includes standard order info and Macro buttons. Row 11 includes the heading for order data.
For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.
The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)
File and Folder info:
To simplify suggestions, the following file and path info can be used (I can change to the correct later): Template file name: template_order.xlsm Template file location: \servershared emplate
Total list file name: total_list.xlsx Total list file location: \servershared otal
Selection info:
The template file exists of a "general order info area" A1:N10 The column heading for order data is located at A11:N11 The selection to be copied is A12:N550 - But only rows where column A includes data (not empty). (If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).
When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A Cell A2 = B Cell A3 = C Cell A4 = D Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C Cell A2 = D Cell A3 = E Cell A4 = A Cell A5 = B
how to create a copy of my employee attendance template. Is there a way to create a copy of the template by entering an employee name in the "name" cell of the template and it automatically renames the sheet that employee name and also saves or recopies the template for use with the next employee?
I Have a number(30+) of excel files based off of one template. I have since updated the template, thus making the the old ones obsolete. Is there a way to update the older files to use the new template without having to copy and paste the addition's row by row column by column?
None of the additions to the template will change the placement of existing data, nor will it change the data itself. It will however add Values to cells that were previously empty.
I have created a template including a macro. It works as expected besides the issue that macros need to be enabled manually. This is totally annoying. I need to have it work directly.
Or what would be another way to have a macro available all the time I run Excel?
I created a macro in VBA that pops up a calendar with keyboard short cut and places the date in selected cell. It works great on my pc. I can't share the macro with anyone. I saved it as an add-in...installing the add-in did nothing. Then I saved it as a template...the template did not open with any macros associated. both cases, no errors. no message to enable to disable macro.
Step 1: I have data coming from a data dump which is placed on the "Summary" sheet of my excel workbook. I need to take column A (beginning at A8) and create a new sheet (based on "Template" located in the same workbook) for each name in column A.
Step 2: I need to place the name of the new sheets in cell C4 of each sheet so I can do a lookup using C4 as my lookup_value, so this can't be a formula like "=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)" because lookup doesn't function properly.
Step 3: Delete "Template", so that the only things left are the "Summary" sheet and the new sheets.
Each department will have their own workbook with a "summary" sheet and different sheet names although they will all start off with the same data dump and will all be in the same format. Each department could also have a different number of new sheets added depending on information from the data dump.
I found a utility (ASAP Utilities) which will do the steps I need done, but it won't record in the macro.
Budget time is fast approaching and each department needs their worksheets.
I need to create a "purchasing programme sheet from extracted data in a different workbook.
In short I need to open the Allocation, Add stock qauntities to the the boxes with a quantity in it and if its a zero i need (Once the button has been pressed) the information to be extracted to the corresponding boxes in the Purchasing Programme Document: Description, Part Number and quantity.
*Inserts an existing worksheet template and places it at the end (or after all) the existing worksheets.
What I would like the macro to also do is:
*Automatically rename the inserted worksheet (via my worksheet template) in sequence to the existing worksheets
Example: So let's say I have 3 existing worksheets titled Sheet1, Sheet2, Sheet3 (that's basically the default naming Excel uses). But would when I insert a new worksheet (via my worksheet template) it is shown as Sheet. And if I insert another one, it would be Sheet (2). So basically it is showing as such:
Sheet1, Sheet2, Sheet3, Sheet, Sheet (2)
What I would like the macro to do is automatically rename those last 2 worksheets (and any subsequent worksheets thereafter) in sequential order. Basically displaying it as such:
Sheet1, Sheet2, Sheet3, Sheet4, Sheet5...(and so on and so forth)
I'm trying to create a workbook with multiple worksheets. My first sheet to be named "Main" and each additional sheet to be named in sequence after the values in the cells between B5:B98 on !Main.
I'd like to have a macro that would take a worksheet in this workbook named "Template" and make a copy for each cell between B5:B98 and name that new worksheet "c" and then the value in each of those (B5:B98) cells.
Example: First worksheet named "Main" Second worksheet named "c01" Third worksheet named "c01.1" and so on.....
1) I created a one-sheet template, and a new workbook from that sheet. When in that new workbook I go Insert>Sheet>Other and select the aforementioned one-sheet template, Excel crashes, or if not, it adds the new sheet, but then no longer saves the workbook and starts producing error messages (like: "An unexpected error has ocurred. AutoRecover has been disabled for this session of Excel.").
1a) Now, the complication is that this is working when I do a model operation with a generic template sheet. So I checked the template that I actually want to form sheets after, and Excel finds no errors, nor does it's name contain any unusual characters. What could Excel prevent from working with a template like this?
2) How do I edit a template? The only way I can find is to manually find the spot in finder, open, and save with the same name. But: if I do that, the documents basing on that template don't change accordingly. If they're intended not to, the whole template procedure makes no sense. I could then just as well copy a file. — I've been searching for tutorials on that, but google doesn't even return a single result on Excel "edit template". Therefor my very basic question here.
(Excel 2007), I have a template that I need duplicated for every reference. My Worksheet lists all the references and the macro use to duplicate a worksheet for every reference in the worksheet. The problem is when duplicating now, it duplicates the name of the template. For example, when the macro is ran sheet1= Template(1), sheet2= Template(2) ect.
Here's the code- I think it has something to do with the named ranges
Code: Sub Macro1() For i = 1 To Application.WorksheetFunction.CountA(Worksheets("Worksheet").Range("A:A")) Sheets("Template").Select Sheets("Template").Copy After:=Sheets(Sheets.Count) Sheets(Sheets.Count).Name = Worksheets("Worksheet").Cells(i, 1).Text Next i End Sub
Included in the macro, I would like for the macro to open up Word, grab a label template, that I have stored (have to navigate there), and then merge the data from the excel file into the Word template.
