I am looking for a way to define a 'Data Validated' Cell to hold a List of Dynamic Sequential Numbers - from 1 to the Value of cell A4. For example:
If cell A4 has a value of 5 the 'Data Validated' List will be 1,2,3,4,5
I have tried to 'name' the Array-Formula {=ROW(INDIRECT("1:"&A4))} and put the 'name' as the List source but without success.
I am looking for a solution for my problem: I work for a bus company, I need a spreadsheet where I will record the bus numbers into a sheet but I only want to be able to add the number once ie. error if duplicate bus entered. Also the numbers will change from time to time, old buses sold when new ones arrive. I have the following code that someone helped me with wich works fine provided you don't have to change the numbers.
=And(Or(And(E42>=121,E42<=125),And(E42>=149,E42<=156),And(E42>=320,E42<=363),And(E42>=700,E42<=799),And(E42>=800,E42<=991)), COUNTIF($B$3:$E$46,E42)<2)
Is it possible to have a dependent validation drop box that under certain conditions automatically produces an actual value in the cell instead of a drop-down list to choose from? For example, if I choose “Holy Avenger” in the first drop box, and the value for that choice in the second drop box is always a “2”, can you get it to auto-populate in the cell occupied by that 2nd drop box (cell B5 in the attachment)? Or, are you restricted to using Lists only, meaning that you could create a List that only has the value “2” in it, and the user would be required to choose the “2” in the drop box?
View 2 Replies View RelatedI'm working on trying to maintain an inventory management sheet where i basically enter all the spare parts issued to vehicles. Now there are more than 700 parts dat form the components of a vehicle, so i decided to split this list into 12 spare groups(Gear, Engine, Body, Axle, etc etc..) and then based on wotever spare group being selected my sheet wud pull dat specific spare group list.
Since i've worked with indirect function before i thought this was a piece of cake!
However when i actually sat working on getting my sheet together i realised its not gonna be dat easy! Basically my spare group lists are a work in progress and so new items would/may be added to these lists as we start working on this sheet. So i decided to make them dynamic by using the offset function. But list validation fails when i use Indirect function on dynamic ranges!
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I have a sheet (database) which has dymamic validation lists based on a another sheet called "look ups". The problem I have is When I choose any of the validation drop downs there are two blank entries at the bottom and the cursor is on the first one of these. I would like the cursor to be on the first entry in the validation list
View 7 Replies View Relatedi want to create dynamic validation list in excel. The logic shd be like
this. i m fetching data from SAP on the click of execute button in sheet2. at this point of time i want to create dynamic validation list in sheet2 in row "E". and data to be filled in the list will be fetched from sheet1. i have added new named range in sheet1 called"mbe"(in sheet1!A) when user will execute excel i will feel data in sheet1 cloumn A. and i have written this code in the click of execute button :
With ActiveSheet.Range("myrange")
.Validation.Delete
.Validation.Add xlValidAlertStop, , "=mbe"
.Validation.InCellDropdown = True
.Validation.IgnoreBlank = True
End With
its giving runtime error "1004" (object defined error)
I have a question on the above but can't seem to find a solution. There are two ways that I can find for dealing with dynamic lists via data validation:-
1) Offset and match, cavet being the data must be sorted a-z
2) Have lists for each potential selection
Is there any way to get around 1 without having to do 2? E.g. Got two columns of data, unsorted, and a list from which the user can choose from. The user chooses from the list in first cell, in the second cell require the dynamic list to return all the values accordingly?
I have a dynamic validation list (see attached) which will not accept the indirect function as a formula in the listbox.
Using the named range on its own works fine, but using the indirect generates an error.
I've converted to a dynamic validation list which allows for a selection of data to be made available based on the selection of the two previous columns.
Unfortunately since creating the new validation a circulating error occurs when tabbing through the table (B) to create a new line or entry? Additionally I've found the following to occur also;
1. The payments and PO# columns converts a red shade colour?
2. The validation on Table B description column do not work while in excel online edit mode?
I have a spreadsheet that pulls in a log file after running a macro with 100000eight digit numbers which may or may not have a record in the system. These numbers are produced by using any seven digits and adding a check digit at the end for an eight digit number using the mod function specifically Mod7...=MOD(A1,7) , for example, if cell A1 has 1234567 the mod7 function will produce the check digit 5 then concatenating for the eight digit number 12345675. the next number will be produced by adding 1 to the end of the 7 digit number 1234567+1=1234568 then concatenating again the number with the check digit 6, 12345686. this would be sequential order.
my spreadsheet gets all the eight digit numbers with no record and sorts them in MOD7 sequential order in one column. since the spreadsheet ignores the eight digit numbers with records. my compiled list of numbers have non sequential numbers in the list.
i need a way in VB to loop through 100000 lines (column A) and find the first and last number of a MOD7 sequential range and place the first number in (column B) and the last in (column C).
I have figured a way to do this in a spreadsheet but it takes too many functions and calculations in 100000 lines so the spreadsheet takes too long to open and sometimes crashes!
I have 2 columns First Name & Surname. What I want to do is create a data validation list on the surname which results in the 2nd data validation list only showing the first names which link to one of the surnames.
i.e. If I selected Smith in the 1st validation list then I would only like to see 'Paul' as an option in the 2nd list
First Name
Surname
Paul
Smith
Paul
Jones
Tony
Phillips
i have a list of serial numbers in a column, say column a, for example, and i have corresponding data in columns to the right of this, say just column B for example- I also have a header on column B which counts the data in column b. (just a COUNTA, counting occurences of 'x' )
my issue is this: i need to limit the range of the COUNTA dynamically- by the number of serial numbers in column A. for example: if i have 10 serial numbers, i want my COUNTA range to be B1:B10 (excluding header) and... i need this to be a built-in formula, NOT a VBA macro. i need it to update automatically, as soon as another serial number is entered. i've tried using references to named ranges and all sorts of language tricks, and i cant seem to get it to work. (such as:
' =counta(b1:namedrange1)
i'm going to have to do the same thing with COUNTIF's, so if that is also easily explainable,
Sheet A - The user input form. There is a column which needs data validation. I want it to look at Sheet B and ONLY accept values based on a column value from the other sheet
Sheet B- Contains the list we want the data validation from. One column is considered the lookup value, while the other is what we want the user to be selecting from.
Here is an example list:
Predecessor Entity Key---- Item ID
2659407------------------- SHELL - SOUTH TOWER
2659407------------------- MARKING / LABELING
2659407------------------- FOUNDATIONS & SUPPORTS
2659410------------------- UPPER HEAD - NORTH TOWER
2659410------------------- FOUNDATIONS & SUPPORTS
2659410------------------- LOWER HEAD - SOUTH TOWER
So, in Sheet 1, if one of the triggering values is 2659407, I want my data validation to ONLY Allow the first 3 values from the Item ID column.
The issue I am having is using a pretty messy formula to try and produce a dynamic range for the Data Validation to use.
Here is what works:
=INDIRECT(CONCATENATE(ADDRESS(MATCH(J4,A:A,0),2),":",ADDRESS(ROW(OFFSET(INDIRECT(ADDRESS(MATCH(J4,A:A,0),2)),COUNTIF(A:A,J4)-1,0)),2)))
where J4 is the lookup value/1st column depicted in our simple example
This is done on the SAME sheet. So I figure, just add "'Sheet Name'!" for the first argument in CONCATENATE. Unfortunately, this does not work. How to get this to work on an outside sheet?
Update:
Also tried:
=INDIRECT(CONCATENATE("'Profile Item Library'!",ADDRESS(MATCH(J4,'Profile Item Library'!A:A,0),2),":",ADDRESS(ROW(OFFSET(INDIRECT(ADDRESS(MATCH(J4,'Profile Item Library'!A:A,0),2)),COUNTIF('Profile Item Library'!A:A,J4)-1,0)),2)))
The error I get is that I cannot Reference other worksheets. However, If I type in ='Profile Item Library'!B1:B18 for the Data Validation argument, it works.
I need to setup a dropdown list (I already have the dropdown created) so that once a value in the list is used, it disappears from the list. Now for the monkey wrench...It need to completely re-populate once the list that is being generated from it is cleared.
I also need to copy a value from one sheet to another sheet, however, the location needs to be matched with a corresponding value from the first sheet. Hopefully it will be easier to understand within the workbook (I feel like I'm not explaining it well).
I have attached a sample copy of the workbook and what I am trying to accomplish.
Mens_Dorm_Sample.xlsm
I have a spreadsheet that I use to store my rock climbing records.
how to create Dependent Validation for this spreadsheet.
The spreadsheet has three worksheets:
1. Climbing Area
This is a unique list of various rock climbing areas.
Data in column A only
2. Climb Details
This is where all the details of the climb e.g. pitch lengths, grade, etc are recorded. Column called Climbing Area uses a named range validation from the Climbing Areas) sheet.
Climbing Area data validation in column A and Climb Name in column B, grade, pitch lengths in other columns.
3. Dates & Pitches
This is where I record the date I did the actual climb. Once again the Climbing Area uses data validation from the Climbing Area worksheet.
What I am trying to work out is how I can get the next column Climb Name to be dependent upon the previous column. For example if I select a climbing area of Mt Arapiles, I only want those climbs from the Climb Details worksheet that a recorded as being at Mt Arapiles.
Column A is date when climb done. Column B is data validation from Climbing Area. Column C is Climb Name (would like this dependent upon column B.
I am a personal trainer/strength coach, and i use excel to write my workout programs.
To save time in writing programs i have made lists of all of my exercises in a separate workbook. I have them all linked via data validation in drop down lists to different templates for different populations ;weight loss, injury prevention, sports performance, ect. And it has been working great!
However here is my problem, I would like to be able to return an entire list of an exercise circuit with one drop down list and have it input all the exercises in cells below the drop down list.
So for example i have three columns on a separate sheet.
Column one
Circuit A
exercise 1
exercise 2
exercise 3
Column two
Circuit A
exercise 4
exercise 5
exercise 6
Column Three
Circuit A
exercise 7
exercise 8
exercise 9
In cell A1 i want a drop down list that that has circuit A, B, C,
using the drop down list if i pick circuit A it will return exercise 1, 2, 3 in the cells A2, A3, A4, receptively.
I am unable to use dependent data validation lists using the INDIRECT function when the initial named range is a dynamic one.
See attached.
The named ranges 'Men','Women','Children' are all dynamic based on number of entries in each column order to accommodate a growing list, whilst also not having blanks in the dropdown (hence I haven't used entire column ranges). The named range 'test' is a static one.
Column H has a dependent data validation based on entry in Col G. This works for the static list, but not the dynamic one!
Trying to set up a dynamic data validation, where each of the subsequent data validation boxes change based on the selection in the first data validation box (while maintaining 4 parameters within a cell, except for the last one).
I have used the IF-statements to determine the "Week's SUM" in H5.
What I'd like to do next is to determine a formula in the "Week's SUM" cells (H6,H7,H8) based on the choices in data validation boxes "Week #" (G6,G7,G8) with the following rules in place:
1. If I made a choice in G5 to be "1" which caused data validation in cell G6 to update, then in G6 I choose "2", the output in H6 should be just week 2's value of 20 (not the sum of week 1 and 2).
2. However, if I choose "3" in G6 (after I chose "1" in G5, as above) then I'd like the output in H6 to be the SUM of week's 2 AND 3, if that makes sense and so on. (e.g. If I chose "5" in G6, then output in H6 should be the SUM of week's 2 AND 3 AND 4 AND 5).
Same rules apply for H7 and H8. I have a feeling this may involve MATCH function and INDIRECT or SUMIFS but how to approach this.
I've attached a file : Dynamic DV and Dynamic SUMS.xlsx
I'm using Data Validation for various fields in a form and I'm trying to make it user friendly by adding Error Alert conditions and text explaining why the error has occurred. I also want the form to be translatable into other languages.
For some VBA message boxes that get displayed I can put the English text in some hidden cells and that can be translated easily by someone without access to the code. But I cannot figure out how to make the Data Validation Error Alert messages point to a cell so that they are also translatable without forcing the translator to open each Data Validation dialog.
I can use a dynamic named range and a direct reference to the name and the DV works.
I can use a standard named range (not dynamic) and an INDIRECT() reference to a cell with the name of the range in it and the DV works.
But if I try to use a dynamic named range and an indirect reference to a cell with the name of the range in it, the DV fails.
Any workarounds out there? This project includes a LOT of DV lists, getting them to self-maintain is important if I can do it.
I have attached a sample data sheet which i am working on . ITs a comparitive matrix trable with Input validation between 0&2 . I also want the table to be dynamic .If i want to increase or reduce no. of rows and clumns i should do it some how . More details are mentioned in the attached file .
View 1 Replies View RelatedI can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies View RelatedI'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
I need a formula to add data in it's respective column, only if the month and year match.
The columns of data will be very long, thousands of lines possibly.
So, basically, in this example.
in O1, if the the data in the columns below match the month(M1) and year (N1), then sum those variables.
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies View RelatedI have a List of Different Fruits in Cells A1 to A5
Apple
Banana
Orange
Strawberry
Cherry
And I use data validation list in 5 different cells from Cells C1 to C5 then in every cell the list will show all the fruits,
But I want that if I select Any Fruit in cell C1 that should not be included in the remaining 4 cells, and the fruits selected in Cells C1 and Cell C2 should not be included in the remaining 3 cells and so on....
I Used the formula
=IF(C1=A1,OFFSET(A2,,,COUNTA($A$2:$A$5),1),0)
But this works fine if I select Apple in the Cell C1, then the List of C2 Shows all Fruits other than Apple, But if in Cell C1 I select any fruit other than Apple it does not work... (Using Excel2007 & Win XP)
I've attached a spreadsheet showing the effect I'm trying to achieve. A list (which changes weekly) contains employee details and length of service. Based on the length of service I need to build a new list grouping the employees based on the service length.
list-test.xlsx
I have created two names within column A (ie: Insert/Name/Define)
in cell A1 I've named StartA01
in cell A5 I've named EndA05
I would like to create a sequential number within this range via script, whereby when new rows are inserted, the script will update the order.
eg:
begin with:
A01
A02
A03
A04
A05
3 rows inserted will update to:
A01
A02
A03
A04
A05
A06
A07
A08
dear....can i set width in list box data validation (width in cell i set short).thanks
View 9 Replies View Related