Dynamic Data Validation To Determine SUM Related Output?
Dec 2, 2013
Trying to set up a dynamic data validation, where each of the subsequent data validation boxes change based on the selection in the first data validation box (while maintaining 4 parameters within a cell, except for the last one).
I have used the IF-statements to determine the "Week's SUM" in H5.
What I'd like to do next is to determine a formula in the "Week's SUM" cells (H6,H7,H8) based on the choices in data validation boxes "Week #" (G6,G7,G8) with the following rules in place:
1. If I made a choice in G5 to be "1" which caused data validation in cell G6 to update, then in G6 I choose "2", the output in H6 should be just week 2's value of 20 (not the sum of week 1 and 2).
2. However, if I choose "3" in G6 (after I chose "1" in G5, as above) then I'd like the output in H6 to be the SUM of week's 2 AND 3, if that makes sense and so on. (e.g. If I chose "5" in G6, then output in H6 should be the SUM of week's 2 AND 3 AND 4 AND 5).
Same rules apply for H7 and H8. I have a feeling this may involve MATCH function and INDIRECT or SUMIFS but how to approach this.
I've attached a file : Dynamic DV and Dynamic SUMS.xlsx
View 3 Replies
ADVERTISEMENT
Jun 6, 2014
I have an Excel file with two different visible sheets (dashboards), each with different types of charts, which are pulling from the same data tables on a hidden sheet. I have a data validation drop down list on one of the dashboard sheets, which lists 7 items. Once one of the 7 item is selected, both dashboards update, which is what I want. However, I'd like to be able to have duplicated, related validation drop down lists. So if someone is looking at the first dashboard sheet and they select a new item, when they go to the second dashboard and see that same item, they could on that second dashboard select a new item without having to go back to the first dashboard.
I'd provide an example if I could, but cannot. I've tried searching on the forum for something similar, but most often the topic of dependent data validation is on two different types of drop downs with the second being dependent on the first, whereas I'm looking for two drop downs that are interconnected and can update in sync.
View 2 Replies
View Related
Jan 9, 2014
Essentially, I would like a user to be able to select a PUB from the Data Validation drop down in row 2 of the PUB RATES sheet so that the corresponding information in the DATA sheet autofills.
Currently, this works only for the first column under each PUB when selected and this fills across all 4 columns (rather than the respective information for each column filling).
Also, the Data Validation dropdown includes blanks which I would like to exclude.
I have used a Range Name for the Data Validation of each PUB so that these can be drawn from a separate sheet as I don't want all the DATA content on the same sheet as the PUB RATES content.
View 4 Replies
View Related
Jun 24, 2009
I have a question on the above but can't seem to find a solution. There are two ways that I can find for dealing with dynamic lists via data validation:-
1) Offset and match, cavet being the data must be sorted a-z
2) Have lists for each potential selection
Is there any way to get around 1 without having to do 2? E.g. Got two columns of data, unsorted, and a list from which the user can choose from. The user chooses from the list in first cell, in the second cell require the dynamic list to return all the values accordingly?
View 5 Replies
View Related
Aug 26, 2008
I have a vehicle intake-form in which users have to enter vehicle data.
I also have a huge list containing make/model information.
I would like to be able to use this database in the following way : I want the user to select the make in cell A1 , and then the model in cell B1. It must be possible to choose for example the make "BMW" in cell A1 and then cell B1 should only display the BMW models, and not all others that are present in the list...
I tried to use Data Validation with a list of choices, this works fine for the make (A1) ; but how do I make the list used for Data Validation on B1 dynamically related to the value in cell A1 !
View 7 Replies
View Related
Aug 4, 2014
Sheet A - The user input form. There is a column which needs data validation. I want it to look at Sheet B and ONLY accept values based on a column value from the other sheet
Sheet B- Contains the list we want the data validation from. One column is considered the lookup value, while the other is what we want the user to be selecting from.
Here is an example list:
Predecessor Entity Key---- Item ID
2659407------------------- SHELL - SOUTH TOWER
2659407------------------- MARKING / LABELING
2659407------------------- FOUNDATIONS & SUPPORTS
2659410------------------- UPPER HEAD - NORTH TOWER
2659410------------------- FOUNDATIONS & SUPPORTS
2659410------------------- LOWER HEAD - SOUTH TOWER
So, in Sheet 1, if one of the triggering values is 2659407, I want my data validation to ONLY Allow the first 3 values from the Item ID column.
The issue I am having is using a pretty messy formula to try and produce a dynamic range for the Data Validation to use.
Here is what works:
=INDIRECT(CONCATENATE(ADDRESS(MATCH(J4,A:A,0),2),":",ADDRESS(ROW(OFFSET(INDIRECT(ADDRESS(MATCH(J4,A:A,0),2)),COUNTIF(A:A,J4)-1,0)),2)))
where J4 is the lookup value/1st column depicted in our simple example
This is done on the SAME sheet. So I figure, just add "'Sheet Name'!" for the first argument in CONCATENATE. Unfortunately, this does not work. How to get this to work on an outside sheet?
Update:
Also tried:
=INDIRECT(CONCATENATE("'Profile Item Library'!",ADDRESS(MATCH(J4,'Profile Item Library'!A:A,0),2),":",ADDRESS(ROW(OFFSET(INDIRECT(ADDRESS(MATCH(J4,'Profile Item Library'!A:A,0),2)),COUNTIF('Profile Item Library'!A:A,J4)-1,0)),2)))
The error I get is that I cannot Reference other worksheets. However, If I type in ='Profile Item Library'!B1:B18 for the Data Validation argument, it works.
View 2 Replies
View Related
Dec 17, 2013
I need to setup a dropdown list (I already have the dropdown created) so that once a value in the list is used, it disappears from the list. Now for the monkey wrench...It need to completely re-populate once the list that is being generated from it is cleared.
I also need to copy a value from one sheet to another sheet, however, the location needs to be matched with a corresponding value from the first sheet. Hopefully it will be easier to understand within the workbook (I feel like I'm not explaining it well).
I have attached a sample copy of the workbook and what I am trying to accomplish.
Mens_Dorm_Sample.xlsm
View 2 Replies
View Related
Dec 2, 2006
I am looking for a solution for my problem: I work for a bus company, I need a spreadsheet where I will record the bus numbers into a sheet but I only want to be able to add the number once ie. error if duplicate bus entered. Also the numbers will change from time to time, old buses sold when new ones arrive. I have the following code that someone helped me with wich works fine provided you don't have to change the numbers.
=And(Or(And(E42>=121,E42<=125),And(E42>=149,E42<=156),And(E42>=320,E42<=363),And(E42>=700,E42<=799),And(E42>=800,E42<=991)), COUNTIF($B$3:$E$46,E42)<2)
View 2 Replies
View Related
Jan 24, 2008
I have a spreadsheet that I use to store my rock climbing records.
how to create Dependent Validation for this spreadsheet.
The spreadsheet has three worksheets:
1. Climbing Area
This is a unique list of various rock climbing areas.
Data in column A only
2. Climb Details
This is where all the details of the climb e.g. pitch lengths, grade, etc are recorded. Column called Climbing Area uses a named range validation from the Climbing Areas) sheet.
Climbing Area data validation in column A and Climb Name in column B, grade, pitch lengths in other columns.
3. Dates & Pitches
This is where I record the date I did the actual climb. Once again the Climbing Area uses data validation from the Climbing Area worksheet.
What I am trying to work out is how I can get the next column Climb Name to be dependent upon the previous column. For example if I select a climbing area of Mt Arapiles, I only want those climbs from the Climb Details worksheet that a recorded as being at Mt Arapiles.
Column A is date when climb done. Column B is data validation from Climbing Area. Column C is Climb Name (would like this dependent upon column B.
View 9 Replies
View Related
Feb 2, 2010
I am a personal trainer/strength coach, and i use excel to write my workout programs.
To save time in writing programs i have made lists of all of my exercises in a separate workbook. I have them all linked via data validation in drop down lists to different templates for different populations ;weight loss, injury prevention, sports performance, ect. And it has been working great!
However here is my problem, I would like to be able to return an entire list of an exercise circuit with one drop down list and have it input all the exercises in cells below the drop down list.
So for example i have three columns on a separate sheet.
Column one
Circuit A
exercise 1
exercise 2
exercise 3
Column two
Circuit A
exercise 4
exercise 5
exercise 6
Column Three
Circuit A
exercise 7
exercise 8
exercise 9
In cell A1 i want a drop down list that that has circuit A, B, C,
using the drop down list if i pick circuit A it will return exercise 1, 2, 3 in the cells A2, A3, A4, receptively.
View 9 Replies
View Related
Apr 24, 2014
Is it possible to have a dependent validation drop box that under certain conditions automatically produces an actual value in the cell instead of a drop-down list to choose from? For example, if I choose “Holy Avenger” in the first drop box, and the value for that choice in the second drop box is always a “2”, can you get it to auto-populate in the cell occupied by that 2nd drop box (cell B5 in the attachment)? Or, are you restricted to using Lists only, meaning that you could create a List that only has the value “2” in it, and the user would be required to choose the “2” in the drop box?
View 2 Replies
View Related
Aug 7, 2014
I am unable to use dependent data validation lists using the INDIRECT function when the initial named range is a dynamic one.
See attached.
The named ranges 'Men','Women','Children' are all dynamic based on number of entries in each column order to accommodate a growing list, whilst also not having blanks in the dropdown (hence I haven't used entire column ranges). The named range 'test' is a static one.
Column H has a dependent data validation based on entry in Col G. This works for the static list, but not the dynamic one!
View 4 Replies
View Related
Oct 1, 2009
I'm working on trying to maintain an inventory management sheet where i basically enter all the spare parts issued to vehicles. Now there are more than 700 parts dat form the components of a vehicle, so i decided to split this list into 12 spare groups(Gear, Engine, Body, Axle, etc etc..) and then based on wotever spare group being selected my sheet wud pull dat specific spare group list.
Since i've worked with indirect function before i thought this was a piece of cake!
However when i actually sat working on getting my sheet together i realised its not gonna be dat easy! Basically my spare group lists are a work in progress and so new items would/may be added to these lists as we start working on this sheet. So i decided to make them dynamic by using the offset function. But list validation fails when i use Indirect function on dynamic ranges!
View 2 Replies
View Related
Jun 23, 2014
I'm using Data Validation for various fields in a form and I'm trying to make it user friendly by adding Error Alert conditions and text explaining why the error has occurred. I also want the form to be translatable into other languages.
For some VBA message boxes that get displayed I can put the English text in some hidden cells and that can be translated easily by someone without access to the code. But I cannot figure out how to make the Data Validation Error Alert messages point to a cell so that they are also translatable without forcing the translator to open each Data Validation dialog.
View 1 Replies
View Related
Jul 21, 2007
I am looking for a way to define a 'Data Validated' Cell to hold a List of Dynamic Sequential Numbers - from 1 to the Value of cell A4. For example:
If cell A4 has a value of 5 the 'Data Validated' List will be 1,2,3,4,5
I have tried to 'name' the Array-Formula {=ROW(INDIRECT("1:"&A4))} and put the 'name' as the List source but without success.
View 8 Replies
View Related
Sep 25, 2009
I can use a dynamic named range and a direct reference to the name and the DV works.
I can use a standard named range (not dynamic) and an INDIRECT() reference to a cell with the name of the range in it and the DV works.
But if I try to use a dynamic named range and an indirect reference to a cell with the name of the range in it, the DV fails.
Any workarounds out there? This project includes a LOT of DV lists, getting them to self-maintain is important if I can do it.
View 12 Replies
View Related
Jul 8, 2013
I have attached a sample data sheet which i am working on . ITs a comparitive matrix trable with Input validation between 0&2 . I also want the table to be dynamic .If i want to increase or reduce no. of rows and clumns i should do it some how . More details are mentioned in the attached file .
View 1 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Feb 6, 2014
is it possible if I have a directory like the following
[Code].....
with .csv files which are placed in arithmetic order 01,02,03 etc to determine if one .csv file is missing and print an error that this file is missing? I think that if I knew how many files I got I would create an array and check one by one the files.. But in case I have a dynamic directory and the number of files is not the same all the time , is this possible?
View 2 Replies
View Related
Mar 13, 2014
I have done all the computation and final output was in the form of tables with different solution sets in one worksheet in an excel.
From the dropdown list (List of solution models), when I select one solution set it should pick that particular workout and populate the final output table in the new worksheet in the same excel. Firstly, I need to establish dynamic linkage between the drop down list and final output tables and then push the final table to new worksheet based on the option selected.
View 1 Replies
View Related
Aug 12, 2006
is it possible to set up a form (or any method) that would let me input a name (from my workbook) that would then "pull" up details about that name. I am thinking of making a staff holiday planner. This would have a column of names, holiday entitlement,days brought forward etc and columns that have a year (daily) calendar.
View 2 Replies
View Related
Oct 31, 2006
Is there a way that I can click on a link in a worksheet that is linked to a data list in in another sheet and display the results in a text box on the original sheet containing the link.
For example ...
View 4 Replies
View Related
May 9, 2008
Essentially I have a sheet of names. This is just my master database. Other sheets get names from this sheet. The names are alphabetized. When I add a new name, the names are resorted on other sheets, but the data assocaiated with those names does not move.
Example:
Sheet1:
Jane Doe
John Doe
Add
Jimmy Doe
Therefore:..............
View 2 Replies
View Related
Feb 22, 2012
I have a table with multiple rows for some employees and single rows for others. Each employee has a unique identifier.
Employee IDT1T2T3T4123Net salesmarket assetsmarginsspeed to market123Net salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time delivery180unit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
Is there a way in which I can restructure the data so that the multiple rows for any single employee are added into subsequent columns in one single row? e.g.
Employee IDT1T2T3T4T1bT2bT3bT4b123Net salesmarket assetsmarginsspeed to marketNet salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time deliveryunit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
The table has approximately 15000 rows & c. 30 columns in the original format. I can use basic excel, but I've never dipped into macros or anything very complicated...
View 1 Replies
View Related
Dec 1, 2008
I am trying to do a multiple compare.
First I have a table that has these headings with data..
Name, Level, Req1, Req2, Req3, Req4
Bob, 2, 423, 506, 649, 798
Fred, 4, 601, 799, 1023, 1547
In another section I have..
name Drop down, level drop down. with the 4 Req.
Basically, when you select Fred and 4, I want to to display 601, 799, 1023, and 1547 in the columns to the left of where you do the selection. (which is not in the same place as that table at the top of this question.
View 9 Replies
View Related
Mar 12, 2008
I have an excel document that contains two columns and ithe columns there are more than 50000 rows of data. The first column contains numbers and the second column contains text filled from only three values for example work, work 1 and work 2.
I want to see only the three identical same values from column A where the values from column B are diferent.Example of how to look the result criteria:
Column A Column B
123456 work
123456 work 1
123456 work 2
View 5 Replies
View Related
Aug 19, 2009
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies
View Related
Jan 30, 2007
I have a sheet (database) which has dymamic validation lists based on a another sheet called "look ups". The problem I have is When I choose any of the validation drop downs there are two blank entries at the bottom and the cursor is on the first one of these. I would like the cursor to be on the first entry in the validation list
View 7 Replies
View Related
Nov 26, 2008
The database is for a Prison, and an obvious item to search for on a userform is Prison number. I have a serach option that generates an array listing in a listbox, selecting that item then populates the userform - no problem.
The problem occurs when an individual has more than once instance that has been recorded, is it possible to have more than one row generated in a listbox that can be selected, I only want indiviudal rows selected. The coding I am using for one of the single instance listbox is etc etc etc has been used to demonstrate that the coding continues to the length of the array requied
Private Sub FindAll()
Dim FirstAddress As String
Dim strFind As String 'what to find
Dim rSearch As Range 'range to search
Dim fndA, fndB, fndC, fndD, fndE, 'etc etc etc' As String
Dim i As Integer
i = 1
Set rSearch = Sheet1.Range("ChargeNo.")
strFind = Me.CbAdjFind.Value 'find Charge No
With rSearch
Set c = .Find(strFind, LookIn:=xlValues)..............
View 4 Replies
View Related
Nov 24, 2008
I have a question regarding dynamic validation. I have attached a sample spreadsheet to clarify if my explanation doesn't. I have a list of codes that map to a list of other codes that are not one to one mapping. I would like for the other users of this code to populate what the correct code on our side is but without having to go thru the entire list in a validation field. (if that makes since)
Using validation before in a similar instance i used indirect to grab a named range to help shorten the list for them. However in this case that would be a ton of ranges i would have to set up! I've tried Match, countif and index in an offset formula in the validation list but can never get it to work!
View 2 Replies
View Related
