Date Format Error In CSV File
Apr 3, 2014
I am facing a weird date format error in .csv file for a specific time periods.
I have a file where data is stored on monthly basis from the years 1976 uptil today. I have all the data months in expected format except for the years 1989, 1990 and 1991. These files are created by using Informatica and SAS.
For example:
Expected date format = 1-January 1989
Actual Date Format = 1-Jan-89
This issue doesn't exist when we open the same file in Excel, Textpad and Notepad.
I have attached screenshot of the data (filename: CSV Issue.JPG).
View 7 Replies
ADVERTISEMENT
May 15, 2009
Apparently my program quits after i try to open an excel file. If you open the file manually you get an error upon opening the file...something like this:
"File you are tyring to open is in a different format than specified by the file extension".
The problem is i am using an excel macro using VBA and once the file is opened the VBA execution quits.
The excel file turns out to be an xml file which excel can open the file and have the VBA continue running if i RENAME the file with an "xlsx" extension. The problem is that i cant ask the user to rename the file.........how do i get VBA to open the file without an issue?
View 13 Replies
View Related
Oct 13, 2009
I found the following code someware on the forum and have been using it for a while and it has been all good, however when I went to use it today it is coming up with Runtime error 1004 and highlights Range("H1") =MyDate.
View 2 Replies
View Related
Feb 18, 2013
I have a spreadsheet with a column full of dates
I used the formatting wizard to make all dates the format of dd/mm/yyyy but, now, when I put a date in the column it throws up a number '41313' instead of a date, even if I manually input the date in the same format as above.
Also, I have tried to turn cells back into general number fields, but this doesn't appear to be changing it back to a date format..
There are HUNDREDS of dates I might have lost if I can't get them to start showing as dates again!
View 2 Replies
View Related
Aug 30, 2007
I'm just wondering how you would go about extracting a date from a filename and formatting it into a different format so you can . Find with it. The file names are always in the same format with the same prefix. So each file is something like ABCDEFGyyyymmdd.xls. I'm really lost on where I should start with this one
View 4 Replies
View Related
Oct 21, 2007
I am using a CSV that has the date in Column A in the format of DD/MM/YYYY. When I open this CSV using a VBA comand the Format of the Cells in this col are then formated as either Date or General. The general format happends when the date cant be turned into US format and when it can then the date is turned US and displayd as such.
SO
14- Sep = 14/09/2007 as General
10- Sep = 09/10/2007 as Date
Im in Australia so the correct format is DD/MM/YYYY. Microsoft has issued a fix for this using Local:=True in the file open comand which is all good and well as it works unless you have office 2000 when it crashes. What would be the best way of fixing this, so that the Dates are all correct or the col is all the same format?
View 4 Replies
View Related
Sep 10, 2009
What I have is a double quoted, comma delimited text file that is created from an external application, every now and again we need to open the file to make corrections and this is easier if we open it via Excel using the delimiter options, the problem is when saving the file as a csv it removes the double quotes, however I have found some vba coding that adds the double quotes back, which works great, but it changes the format of the date fields from what the original file had from 09-Aug-2009 to 09/08/2009.
I suspect this may be because the file is opened before the double quotes are added and excel changes the format.
Is there any code I can add that will stop the date format from changing ...
View 12 Replies
View Related
May 26, 2014
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
[Code] ......
When I select the calendar in my userform that is set as follows:
[Code] .......
And select the first day of the month, it will always add the format as 05/01/2014 but if I select today’s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
Calendar.xlsm
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I need the format as follows: yyyy/mm/dd
View 2 Replies
View Related
Mar 20, 2012
Formating Date Issue
--
Excel or Access version:Excel 2010
Computer operating system:Windows XP
Sample data:No sample data
Formula(s) right now:Mar-5-2012
Current result(s):Mar-5-2012
My goal:To convert the above text into a date format.
Error message:Can't format the way I want it.
How error occurred:No error message
Generated in:Excel
View 3 Replies
View Related
Dec 19, 2006
the spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
View 7 Replies
View Related
Apr 24, 2012
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
View 7 Replies
View Related
Oct 10, 2011
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies
View Related
Mar 7, 2012
I am receiving an error at
Set CopyRng = Wkb.worksheet1.Range(Cells(RowofCopyworksheet, 1),
Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToLeft).Column))
I am trying to copy the first sheet in each file in the designated folder and paste it into a master worksheet.
Below is the code.
'Description: Combines all files in a specific folder to Format File for Upload.xls
Sub MergeMultipleFiles()
Dim path As String, ThisWB As String, lngFilecounter As Long
Dim wbDest As Workbook, shtDest As Worksheet, ws As Worksheet
Dim filename As String, Wkb As Workbook
Dim CopyRng As Range, Dest As Range
Dim RowofCopySheet As Integer
[Code] ....
View 1 Replies
View Related
Feb 2, 2007
When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example;
The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"...
I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"...
The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook
Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks
If wb.Name = "P'Binder L&T Pages.xls" Then ........................
View 9 Replies
View Related
Aug 10, 2009
I have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
View 2 Replies
View Related
Mar 31, 2014
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies
View Related
Oct 26, 2012
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
View 2 Replies
View Related
Aug 1, 2013
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
View 3 Replies
View Related
Oct 17, 2012
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies
View Related
May 23, 2014
I have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
View 9 Replies
View Related
Jan 10, 2007
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
View 9 Replies
View Related
Mar 19, 2008
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
View 5 Replies
View Related
Sep 20, 2013
I saved my worksheet in vba .xlsx and for some reason, when I go to the folder that it's saved in and try to open the file I get an error message saying "excel cannot open the file 'PO Acks fo 09-20-2013.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
This is weird because I have another file that I save right before this that opens just fine without an error. Getting frustrating. When I go into the ~Users folder it shows as an excel file and saved as .xlsx.
Where would the link be missing?
Here is the code
Code:
ActiveWorkbook.SaveAs Filename:= _
"G:PURCHASINGSupplier ServicesGroupSharePublic~UsersPO Acks for " & Format$(Date, "mm-dd-yyyy") & ".xlsx"
View 2 Replies
View Related
Apr 8, 2013
I have a long list of dates that are fomatted as 3-12-13 that I want to format under custom date as d-mmm-yy : 12-Mar-13. I tried to do this but it does not change. I tried to change it to a number and that didn't work either.
View 2 Replies
View Related
Oct 6, 2008
Example......
In D2 I have: =B2
In D3 I have manually input: (space)3-08
As you can see the CONCATENATE puts the "39569" date in A2 But the second line puts the text date as I prefer. What I would like to do is put in a formula or macro in D2 and down that will change the "Mar-08" to "3-08" so it CONCATENATEs correctly to column A. Simply: I'm trying to avoid manually inputing the text version "3-08" (or whatever M-Y) into D2 down a hundred or so rows!
View 3 Replies
View Related
Mar 23, 2012
How we can convert any data which is in General format in to date format.For ex I've:
19/03/2012 14:57 (General format)
I want the output/result
19-Mar
View 5 Replies
View Related
Feb 21, 2014
I have a column in excel which gets populated in the format "2/1/1980" when copied from a different source. I want a macro to run on this column and convert this in the below format. Required format: '02-01-80 (note the ' symbol before 02 which will keep it as text)
Existing ----> Required
2/1/1980 --> '02-01-80
2/1/1970 --> '02-01-70
2/1/1983 --> '02-01-83
I need this macro to run on two columns and replace them with the required format. I can do a find and replace either in the sheet or through hard coding the VBA, but as the date format keeps growing, I would need to do this via code and hence requesting the same.
View 4 Replies
View Related
Jul 3, 2006
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
View 3 Replies
View Related
Oct 19, 2012
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
View 1 Replies
View Related
Jan 17, 2010
I have two questions regarding date format and hope you can provide input.
1) say 01/01/2010 displays as Jan-10 and i need a new column to state it as JAN. What function should i use to achieve it?
2) i need to state the difference between first day and last day of the month. What function should i use to achieve it?
View 2 Replies
View Related
