I'm just wondering how you would go about extracting a date from a filename and formatting it into a different format so you can . Find with it. The file names are always in the same format with the same prefix. So each file is something like ABCDEFGyyyymmdd.xls. I'm really lost on where I should start with this one
View 4 RepliesI have two questions regarding date format and hope you can provide input.
1) say 01/01/2010 displays as Jan-10 and i need a new column to state it as JAN. What function should i use to achieve it?
2) i need to state the difference between first day and last day of the month. What function should i use to achieve it?
I need formula to extract my data to date format...
see this below :
col.a
expected result
Jakarta, 21 Mei 2005
21 Mei 2005
Bangkok, 11 Agustus 1994
11 Agustus 1994
I have a column with the following values:
SubmitDate
November 8, 2012 1:37:07 PM GMT+05:30
November 8, 2012 9:32:03 AM GMT+05:30
November 8, 2012 4:32:54 AM GMT+05:30
November 7, 2012 10:28:11 PM GMT+05:30
November 7, 2012 8:36:43 PM GMT+05:30
November 7, 2012 6:33:13 AM GMT+05:30
[code]......
I need another column, with just the month specified there based on above dates, so that I can manipulate the complete sheet further using a pivot. Some formatting issue isn't allowing me to use month() function, to derive the month of the date mentioned in the cell.
Using Auto-filter is too tedious, since I'd have to do it 12 times to cover each of the month. Tried recording a macro, but that too isn't supporting much, since it gets specific to cells and hence isn't re-usable in another sheet with similar data.
How can I automate the task of extracting just the month from the above column?
I need to extract the date from the following file name format:
C:Documents and SettingsRezDesktopExcel forumQueue Performance Phone Daily15_Dec_2009.csv
i have macro running where this file path gets save as a string and i can paste this string in a cell, is there a way i can use a few extra line of code to extract only the date from this string and paste only the date? or the other way for this would be use formula to convert this to a date.
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.
I am facing a weird date format error in .csv file for a specific time periods.
I have a file where data is stored on monthly basis from the years 1976 uptil today. I have all the data months in expected format except for the years 1989, 1990 and 1991. These files are created by using Informatica and SAS.
For example:
Expected date format = 1-January 1989
Actual Date Format = 1-Jan-89
This issue doesn't exist when we open the same file in Excel, Textpad and Notepad.
I have attached screenshot of the data (filename: CSV Issue.JPG).
I am using a CSV that has the date in Column A in the format of DD/MM/YYYY. When I open this CSV using a VBA comand the Format of the Cells in this col are then formated as either Date or General. The general format happends when the date cant be turned into US format and when it can then the date is turned US and displayd as such.
SO
14- Sep = 14/09/2007 as General
10- Sep = 09/10/2007 as Date
Im in Australia so the correct format is DD/MM/YYYY. Microsoft has issued a fix for this using Local:=True in the file open comand which is all good and well as it works unless you have office 2000 when it crashes. What would be the best way of fixing this, so that the Dates are all correct or the col is all the same format?
What I have is a double quoted, comma delimited text file that is created from an external application, every now and again we need to open the file to make corrections and this is easier if we open it via Excel using the delimiter options, the problem is when saving the file as a csv it removes the double quotes, however I have found some vba coding that adds the double quotes back, which works great, but it changes the format of the date fields from what the original file had from 09-Aug-2009 to 09/08/2009.
I suspect this may be because the file is opened before the double quotes are added and excel changes the format.
Is there any code I can add that will stop the date format from changing ...
I have a file that has the Date and Time combined into one cell. I want to separate the two, and cannot find anywhere on the net to do so!
This is the cells format:
d/mm/yyyy h:mm
Cells look like this:
28/05/2008 12:30
The code below looks at file names in column A and then goes to a folder and opens and copies the data in range c2 -lastrow from each file and pastes the data into sheet2.
how I could add to the code so that it also inserts the file name in column c?
It would make it easier to track the data in column B.
VB:
Sub CopyFromFile()
Dim fPath As String
Dim lRow As Long
[Code].....
I have attached a sample workbook. The list of file name is in sheet 1. An example of the output is in sheet 2. The data in column A is dummy data generally spans 100's of rows not just 10 as in the example.
The purpose of the code is to be able to put a list of file names in column a in sheet 1 and extract data from those files in a folder. The data extraction works fine. The reson for adding the file names is so that I know what file the data came from.
I need to set up an automated process to open an existing .xls file, extract the data from specific cells located in that file and insert it into a totally different file that I have preformatted to accept this data.
Example scenario:
If I have "that_file.xls" and it is unopened, but it contains data in cells "A2 thru F2" that I need to extract... then I have "this_file.xls" , which is open, and set up with all my calculation cells and a specific layout (lets say it has cells "D8, E9, F10, G11, H12, and I13"). I want to be able to add a button to "this_file.xls" to run a macro that would open a file search window where I can select "that_file.xls", and then it will automatically extract the data from "that_file.xls" into "this_file.xls" as follows:
A2 to D8
B2 to E9
C2 to F10
D2 to G11
E2 to H12
F2 to I13
i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies View RelatedI have created a userform but I am having extensive problems with the date formats.
My system is set to UK and short date is set to: DD/MM/YYYY
When I used code to add the values in the userform to the spreadsheet, any that contained a date format would revert to the US format.
So I finally figured out to use DateValue to format it correctly for example: ...
I have attached an excel spreadsheet
how to set a macro to extract the following datas from it.
Game Title
Description
URL
Picture can be set at 1 side to the right of the URL
One of the reports I run provides me information on lengths of time. Such a field displays as |0:09:16| indicating 9 minutes and 16 seconds. However, when the report generates the excel spreadsheet it saves these cells in date/time format ([h]:mm:ss). If I were to convert this field to the number format (so I can manipulate and graph it) it displays as such |0.00643460648148148| Ideally I would be able to have the data in the field stored as |556| (556 seconds, or 9 minutes 16 seconds). I have thousands of fields that I need to manipulate where the data is stored in this format and I can not figure out how to fix it.
View 5 Replies View RelatedEvery month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
I have an Excel 2010 spreadsheet where the default number format keeps switching to the date format. I keep switching it back and it'll stay as a number format for a time, but then it'll switch back. This is also the case for any new worksheets in that one spreadsheet.
This only happens with this one file - everything else behaves according to my regional settings or to how the file had been previously formatted.
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
View 9 Replies View RelatedI have a some dates in a format which are not being converted into the normal date format. So i made this formula to convert it into the normal date format:
=IF(LEN(B218)=10,(MID(B218,4,2)&"/"&LEFT(B218,2)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=9,(MID(B218,3,2)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,IF(LEN(B218)=8,(MID(B218,3,1)&"/"&LEFT(B218,1)&"/"&RIGHT(B218,4))+0,"")))
Formula is working fine except on this type of date "9/9/2013"..i also tried an OR formula with mid but didnt get the desired result.These are the type of dates:
12/10/2013
12/9/2013
9/11/2013
9/9/2013
7/25/2013
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I have a problem where i am just trying to do a simple copy of dates from one spreadsheet to another
18/03/2008 00:00 however when the its copied to the other spreassheet is changes to the US date formate 3/18/2008 0:00 I need to keep the format as date as the date needs to be the current day. How do i get this to remain UK
I saved my worksheet in vba .xlsx and for some reason, when I go to the folder that it's saved in and try to open the file I get an error message saying "excel cannot open the file 'PO Acks fo 09-20-2013.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
This is weird because I have another file that I save right before this that opens just fine without an error. Getting frustrating. When I go into the ~Users folder it shows as an excel file and saved as .xlsx.
Where would the link be missing?
Here is the code
Code:
ActiveWorkbook.SaveAs Filename:= _
"G:PURCHASINGSupplier ServicesGroupSharePublic~UsersPO Acks for " & Format$(Date, "mm-dd-yyyy") & ".xlsx"
I need to extract all instances of words that have format xnnnnnn, where x is an alpha character (letter of alphabet, to be precise) and nnnnnn are numbers. The words could something like u435586. The problem is I do not know how many instances of these words are in the string. The entire string is contained in a cell. A sample string could be something like:
SMNTv922970;#1283;#SMNT 433925;#1284;#SQRS 003417;#1285;#SQRSp047683;#1286;#SMNT 6132451;#1287;#SQRSw3145627;#1288
and the end result should be
v922970 t433925 t003417 p047683 t6132451 w3145627
The words are preceded by the character "" which might facilitate the search.
I have a report that is downloaded off a company database and creates a report that is attached.
Is there a way to create a macro to extract some data that I need and leave the rest:
I need to keep and everything in the assigned column
PB ID (A3), Issue (B3), Group Code (J3), Group Name (K3), Sub group id (L3), Sub Group Name (M3),Subject ID (L3), Subject Group Name (M3), Subject ID (N3), Subject (O3), PB Status (P3), CPM Report Name (T3), CPM Profile Name (U3), Profile State (V3).
The worksheet's name changes so I can't reference the worksheet. Attached is a copy of what I get when downloaded.
I have a folder with some 126 word document files.
What I need is to create list of file names in a column & its properties like Author, Date modified in adjacent columns of each file..
I am having trouble with a macro of mine. Essentially it opens a file, based on user input (Full path is stored in variable FilePath), but then I want to select that workbook, and therefore need just the .xls filename. I figured I would create a new variable, FileName, to pull out the filename.
How can I edit the string in my macro to extract just the filename.xls from the full path?