Days Between Dates Blank If One Or Both Columns Have No Date
Jun 2, 2014
I'm attempting to write a formula that will allow me to determine the number of days between two dates but to leave the cell with a zero in it if either of the first two date cells are blank or have N/A in them. Here's what I have so far:
=IF(AND(K5="N/A",L5="N/A"),0,L5-K5)
This will give me a zero in the cell if both date cells are blank or will give me the days between if not. How do I get it to also put a zero in the cell if only one of the date cells is blank?
I have the following formula which counts number of days between dates in two adjacent cells excluding holidays
=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1
The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.
I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1
However if no date is in both fields it count -1 (minus one)
If a date is just in one field it counts a very high number, example below.
-1
16/07/2014
-29879
20/06/2014 08/07/2014 12
[code].....
is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?
I wanted to determine the number of days between two dates. Specifically, if the initial date is in one month, and the second is in a different month and an output would result a number of days in each month until the final date. BUT I have a large amount of data to do this for in a list view, way to put a formula in excel and just drag down the entire list to get the required information. see below for an example.
The result I'm looking for is the separate the months and only show the relevant months between the two dates in one cell or the adjacent. Something similar to the table outlined below.
I am trying to calculate dates that will happen 16 days from date specified in column A (A23:A200), based off a certain entry in Column B (B23:B200), which is named in cell P5. I can get the date by doing the specified date + 16, e.g. =IF($B$23:$B$200=$P$5,$A23+16,"")
The trouble I am running into is not having the date populate until it has reached 16 days from the dates in column A, show blank if possible until 16 days from date in column A. The dates in column A will always be previous to todays date.
I have been using a formula to count the number of days between 2 dates and if the date was older than 12 months it would work fine.
The data that i was using has been changed and they have decided to change the format of the dates and dropped the year reference no all i have to work with is dates like 27-07 this represents 27th July i can format this date to work fine unless the date falls before 1 jan this year all i get is lots of numbers and it stuffs up the whole calculation.
I have 2 Columns of Holiday Dates (Column A is the "FROM" date; and Column B is the 'TO' date) and Column C is Peoples Names corresponding to the Holiday dates:
ie:
COLUMN 1 ; COLUMN 2 ; COLUMN 3 A1= 2 Jan 13 ; B1= 10 Jan 13 ; C1= Tom A2= 4 May 13 ; B2= 10 Jun 13 ; C2= John A3= 7 Jul 13 ; B3= 10 Jul 13 ; C3= Tom A4= 3 Aug 13 ; B4= 25 Aug 13 ; C4= John A5= 6 Dec 13 ; B5= 15 Dec 13 ; C5= John.
I am trying to figure out a formula (eg SUMIF) to calculate and summarize the number of Days Holiday based on a person's name (eg Tom's total Number of days Holiday days) based on the above column configuration of Dates and Names.
I have spent too many hours Googling and trial with mostly error in attempting this. I formatted the very first cell A1 for today's date =TODAY(); this is also dirrectly above the column with all the dates in it. I just want an entire row's contents to turn red if it is 15 days old or older. This =$A1<TODAY()-15 somewhat works, but it only turns the date cell red, not the whole row. It also makes blank cells turns red, which I would like to remain blank (another formula is needed I imagine).
Within a user entered range of two dates, I would like to identify the individual calendar date(s) and count the number of Mondays which fall within the specified date range.I will eventually be using the same "Monday" code to find the same data for every day of the week within the dates ranges, but I figured I'd start with Mondays and build from there.
For Example: Date range 1/1/2013 - 1/15/2013 (date ranges could potentially encompass a full business quarter) Within the range, list each of the dates as dates. (used for comparative counting purposes elsewhere in the document)Count the number of Mons, Tues, Weds, Thurs, Fris, and Sats within the date range.Based on the example date ranges above; Mons = 2, Tues through Sats = 3 each.
I would like to move columns to the right as the date changes. For example, the top of the column has the current date. Within the column are about 40 rows of data. as the date changes, I would like that column to automatically move to the right and show that column with yesterday's date, and have that data associated along with it moved. I am looking for 6 months of columns to store, with the current date in the first column and subsequently moving right with the previous dates and info.
------------------------------------------------------------------------------------------------ August 7, 2012 | August 6, 2012 | August 5, 2012 | August 4, 2012 | August 3, 2012 ------------------------------------------------------------------------------------------------ Accepted Processed Accepted Rejected Accepted Processed Processed ... and so on
I want to calculate the end date of my German courses. This is how it works:
A course consists of 60 LU*. The course can occur i. e. three times a week: Monday, Wednesday and Friday. In each day the course lasts 2 LU, which means 6 LU each week. There is no course on Tuesday, Thursday, Saturday, Sunday and on holidays. Therefore this type of course that begins on 18-Nov-2013 will end on 03-Feb-2014.
Another course which occurs Tuesday, Thursday and Saturday, and respectively has 2 LU on Tuesday, 2 LU on Thursday and 3 LU on Saturday and starts on 03-Dec-2013 will end on 06-Feb-2014.
Therefore I want to create a worksheet where I set the start date, choose the days and respectively the LU amount on those days. The end date shall be calculated according to these criteria.
The workday function on excel cannot do this and I do not have any programming skills to work with VBA.
I want to pick a range of dates and find the number of days without sales between those dates. So, a formula that will look to a start date in A1 and an end date in B2, and then count the number of days that did not have sales between. Index/Match/Countif/Dateif I can't seem to make anything work.
Today I am having a very annoying problem that really has me stumped – I need to work out the lag between a Due Date and Delivered Date
But as people sometimes manage to deliver on the Due Date it needs to show a zero (as in they got it in on time) but using the formula below the result is a 1 and I want a zero
Can anyone help me please? I have tried putting assorted -1s in to the formula and it looks like it might work until I copy down and find that if a person delivered one day early the result shows -3 for example!
There are dates in column C and I need to count how many days are coming due within 90 days of each date based on the today() function but do not exceed the 90 days.
I have 3 columns (Name, Pass Date, Fail Date) Each name will only have 1 date in either column B or C.
I want a formula that will say "if there is a date in the pass column (B) then this name is a pass, if there is a date in the Fail column (C) then this name is a Fail"
I am now trying to create a excel macro to auto populate all the dates with reference to a start date and end date. The catch is that only working days are required in the range. My reference cells (start and end date) are in Sheet 1 while the destination cell range are in Sheet 2. The reason for creating a macro instead of a function is that the intervals between the start date and end date changes frequently (annual, semi-annual and quarterly) Best case scenario would be a button which I can just press after i input the dates to generate the range of dates in another sheet.
Using one spreadsheet with three date columns and two columns counting days.
If there is a value in Resolution date, then Column N is blank If there is no value in Submit date and Resolution date, then Column N is blank If there is no value in Resolution date, and there is a value in Submit date, subtract Submit date from todays date to show how many days it has been pending approval
Created on = J4 Submitted on = K4 Resolution Date = L4 Days to Approve = M4 I've got that formula =IF(L4="","",L4-K4) Days Pending Approval= N4 (cell with formula)
If Resoultion Date L4 has a value, return blank If Submit on K4 and Resoultion date L4 are blank, return blank If Resolution date L4 is blank, and Submit on K4 has a value, subtract Todays date from Submit on K4 to show Days Pending Approval
Cell J4______Cell K4______Cell L4__________Cell M4__________Cell N4 Created on___Submit On___Resolution Date___Days to Approve___Days Pending Approval 4/5/13_______blank______Blank____________Blank___________Blank 4/5/13_______4/5/13_____4/7/13___________2_______________Blank 4/5/13_______4/5/13_____Blank____________Blank___________()Today-K4
I would typically consider myself a decent Excel user, but I haven't been able to solve this one. Maybe it's just the lack of sleep now. I am attempting to combine 4 cells into one where the last cell contains a date. Below is the formula I am using:
=B3&" "&C3&" "&D3&" "&TEXT(E3,"m/d/yy")
It works when all of the cells have values, but the only problem I am having is that some of the dates (in column E) are blank. When this cell is blank the default date that displays is "1/0/00." If I add the typical, " " at the end it says the formula has errors. The need for the TEXT(E3,"m/d/yy") for the cells that contain dates is throwing me off.
I have been using: =DATEDIF(A1,B1,"md") & " days" to calculate the difference, in days, between two dates in a speadsheet, however, the number of formulae in the spreadsheet now is cumbersome so I'm trying to put it together in VB.
So, it is for a hotel, I need to know to know between a Check-in and a check-out date, each day (monday, saturday) there is. In depending it is for one night or 12.. I will try to be clear: Depending on the channel of booking and the day of week we have a % of commission different. so I want to put the price in one cell and it is calculate for each date in order at the end I have the right net profit (because the right commission has been applied). Of course to complicate the commissions do not apply in the same order depending the channel and there are fixed costs which are count one time or repeat by the amount of nights. For the these things what i did seems work.
After, my boss would like to link the dates with another excel file which say for each date which "level of price" (price point) is applied and function of this Price Point we have the price applied per room type and offer
But for now, I didn't find anything what can say to me between 2 dates what dates are between...
Right, Column A on my sheet is the date that the work was completed. First thing is I need to be able to count how much work was completed per month. (I dont know why we have it all in one big sheet rather than monthly sheets but thats too logical!)
Secondly, column I is the number of days that piece of work took to complete. I need to be able to have a formula that looks at the month the work was completed, then total up the number of days that the work took.
(Example, if I have three bit of work completed in October, 1 took a total of 20 days, 1 took 15 and 1 took 10 it would = 45 days)
I know that this should be possible as I've had Excel doing more complex formulas than this.
I have a start date (say 01/04/07) and I need to add a number of days to it to get the start of the next financial period. Unfortunately, I need to ignore a small list of dates (bank holidays, etc).
I am trying to set up a function to derive a number of days between 2 dates.
Within the table I have an on hire date, and off hire date, and an optional suspend hire date range in 2 other columns - ie. there are 4 columns with dates in.
On hire is in column B; offhire in C; suspend hire in G and recommence hire in H. The optional suspend hire date range will always fall within the main hire date range.
Column I calculates the number of days for the suspend hire period.
My key cut off date is in cell C4.
There are 3 different scenarios I need the function to cover.
1 - if the cut-off date (in C4) is later than recommence hire, calculate the number of days from hire start to cut-off date, less suspend hire period days.
2 - if the cut-off date (in C4) falls within the suspend hire period, calculate the number of days from the hire start to the begining of the suspend hire period.
3 - if the cut-off date (in C4) falls before the suspend hire period, calculate the number of days from the hire start to the cut-off date.
I have a formula in column E: =NOW() for the date.
I need a Formula in Column H from H11:H300 such that:
i) when a date is entered in G11 the number in Cell H11 should be a difference between G11 and D11 as in rows 11, 13, &14 and
ii) Until a date is entered in cell G11 the difference should be between E11 and D11 as in ROW 12
Below is an example of what I want.
D E F G H8 Date Days9DateStatus as of Expected ActualTOTAL10out of order8-Aprin orderin order114-Mar8-Apr14-Mar101210-Mar8-Apr29134-Mar8-Apr6-Apr33141-Mar8-Apr31-Mar30
I wish to calculate the days between the starting date (column A) and ending date (column B). For the first 7 days are excluding all the holiday and weekend and the rest of it until the ending date are counted.
I couldn't find a solution to my problem in the forum: Is there are formula that will allow me to calculate number of days between two dates? The date format is eg. 07/06/07
I have a simple formula to work out the number of dates between to dates ie: =U6-T6
This works out the days between 9 may and the 31may as 22 days but i want to show the correct number of days including the 9may so this would be 23 days.
I tried this =U6-T6+1 which was fine but all the empty cells now show the value 1 in them.