Declare Multiple Subs On 1 Line Just Like Multiple Variables

May 25, 2014

I'm making a Form with multiple pages and on every page there are atleast 36 Textboxes.

[Amount] [Description] [price]

I want to run a small sub updating the price on changing the amount. My code now looks like this:

Code:
Private Sub TextBox1_Change()
Call UpdatePrice
End Sub

Private Sub TextBox2_Change()
Call UpdatePrice
End Sub

Private Sub TextBox3_Change()
Call UpdatePrice
End Sub

I have to do this on 8 pages, 24 to 36 times, which makes the code extremely long. Is there a better way to do this?

Something like:

Code:
Private Sub TextBox1_Change(), TextBox2_Change() etc...
Call UpdatePrice
End sub

View 2 Replies


ADVERTISEMENT

Comparing Multiple Variables On Same Line?

May 19, 2014

Is it possible to modify the sub "Continue" below so that the "If s.Name <> wsKeep" line compares multiple variables? The code is for the purpose of setting a workbook to a required state, i.e. hide all worksheets except ones stated in variables. I have further subs that would also benefit from me knowing how to do this.

View 2 Replies View Related

Why Declare The Variables

Sep 17, 2009

I know that we should declare all variables at the beginning of a subroutine, in fact I'm told it's good practice to use Option explicit to 'force' variables to be declared, my question is why?

If I don't declare a variable the routine still seems to work OK so what is the downside of not declaring them upfront? Is it just for neatness or common practice or is there another reason?

View 2 Replies View Related

Which Variables To Declare

Dec 10, 2008

As a rule which variables should I declare?

Sub checkPO()
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Application.EnableEvents = False
Dim Rng As Range, MainSheet As Worksheet, item As Variant ', CurrWidth As Integer, UnitWidth As Integer

Set MainSheet = Sheets("Orders To Chase")
Set Rng = MainSheet.Range("B5", MainSheet.Range("B60000").End(xlUp))
totalqueries = MainSheet.Range("B5", MainSheet.Range("B60000").End(xlUp)).Cells.Count

UnitWidth = 282 / totalqueries

With progbar '\displays the please wait box
.Show False

.prog.Width = 0 '\ updates progress bar
.Repaint
End With

If I declare the variable my progress bar goes off screen. remove it and its back to within its box.

I haven't declared any of these variables either. Does this matter?

POnum = .Range("G5").Value
Supplier = .Range("A5").Value
Req = .Range("B5").Value
Ordered = .Range("E5").Value

View 9 Replies View Related

Call Multiple Subs

Jul 28, 2007

Calling a Sub from another Sub is quite common, how about a Sub that does nothing else but call all the subs to execute the entire job?

Will the subs run sequentially after one completes, or will there be the likley hood they will bump into each other causing all sorts of chaos.

View 9 Replies View Related

Declare Variables In Classes?

Apr 14, 2014

Why it seems not possible to declare variables in Class modules like so:

[Code] ....

View 3 Replies View Related

Declare Set Of Valid Variables Acceptable?

Oct 25, 2013

i need to set the range of variables that user can add to the range.

For Example:

AA_*
BB_*
CC_*
ABCD_*

so we accept variables STARTING with AA_ OR BB_ OR CC_ OR ABCD_. If the user enters sth else, then I want to disable the "Enter" key. (If the Cell is Empty than it is also OK!!)

If disabling the Enter key is not possible then maybe i can use Conditioning Formatting? But the question is then if i can use for single condition OR statement.

View 1 Replies View Related

How To Use Same Variables In Different Subs

Jun 4, 2009

I have 2 sub, and I want to use the same variables that reference values on my spreadsheet.

for instance, I declare and set ws as worksheet("sheet1") in the first sub.
in the second one, I also want to reference to the same ws. Instead of having to declare it twice, being redundant, what would be a good way to do this?

View 9 Replies View Related

Using Variables And Calling Subs

Aug 19, 2008

I'm having some trouble getting to grips with using/calling variables and other sub routines.

View 9 Replies View Related

Passing Variables Between Subs?

Nov 3, 2009

I think I am confused as to how to declare a variable in one sub and use it as an input into another sub. I have attached some code below that assigns a value to two variables and then calls a sub that uses those values. I am brand new to programming so I guess I am confused how to implement this.

View 3 Replies View Related

Passing Variables Between Subs

Oct 30, 2013

I have some code I'm running:

Code:
Sub Main ()
Dim Value1 as integer
Value1=5
Call firstroutine
Call secondroutine
End Sub

[code].....

Somehow I need to pass Value1 & Value2 to secondroutine.

View 5 Replies View Related

Variables Loosing Values Between Subs

Nov 30, 2006

trying to get it to put the 2 variables into 2 cells in the worksheet for the moment!

The Forms code is:

Private Sub CmdCancel_Click()
Me.Hide
Unload frmMsgBox
Exit Sub
End Sub

Private Sub CmdOK_Click()
Me.Hide
End Sub

It always fills the cells with False and blank, no matter what buttons are pressed (except cancel), so all I can think is that the information isn't feeding back through properly from the form.

View 4 Replies View Related

Using 2 Variables To Return Multiple Items From Multiple Sheets

Feb 14, 2009

I have a need to populate a summary worksheet using two variables to find data in two or more other worksheets.

I find writing out what I want helps some times so let me try it here.

So my variables are:

Product (there are 22 products)
Supply Less than (inset number)

These are the two criteria I want to use to produce a result.

The next issue is I have 300 stores that carry said 22 products. Each store has a unique number 0001, 0002, 0003 etc. So in a separate worksheet I have a list of the store numbers, and then the products. So each product has the store's number to the left in Column A, Column B has the product name, Column C has the quantity on hand.

What i would like to do on the summary page is select the product, and then select the supply less than or equal to 'x' and then have the stores with the selected product less than or equal to x display below.

The last part of this is then to display (data from an other sheet) on the summary page which contains the quantity of the product selected available at the warehouse for that store.

View 9 Replies View Related

IF Statement Using Multiple Variables To Give Multiple Outcomes

Feb 6, 2009

I'm looking to work out an IF statement based on a series of dates entered to give 1 of 3 possable outcomes. Where:

A1: todays date (exmaple =NOW())
B1: due date (exmaple 10/02/09)
C1: completion date (example 12/02/09)
D1: status (overdue, outstanding or completed)

D1: =IF(A1>B1,"overdue",IF(A1<B1,"outstanding",IF(C1<=>A1 & B1,"completed")))

I know the last part is totally wrong (symbols arranged in that manner), but to clarify i would like the date entered in C1 to override the other statements in the fomula to make it read "completed". If no date is entered in C1 then the formula will return either "overdue" or "outstanding" depending on the other dates in A1 and B1.

View 2 Replies View Related

Sum Multiple Columns Based On Multiple Variables?

Jan 28, 2014

I'm looking to find a formula to calculate the red cell (actually all the cells in the "type" fields) by determining:

1) If the Product in the table matches the one in row 3
2) If the dates in table columns H, J, L, N and P took place in the month before the billing date
3) If those two conditions are met, sum the matching columns in I, K, M, O and Q.

For example for the red cell would currently equal $11,380.02 as the only revenue collection dates in range would be cells I1 through I3.

View 7 Replies View Related

Match And Copy: Declare The Variables Correctly And Have The Operations Done In A Series Of Do/ Loops Or For/Nexts

Feb 2, 2007

I have a series of operations to carry out and, while I can do the code for each individual one, how to declare the variables correctly and have the operations done in a series of Do/ Loops or For/Nexts. Especially the declaring of named ranges as variables. Also a bit uncertain of the best way to find and coy the match. I have attached a simplified version of the workbook, with explanations on it.

Basically what I need to do is loop through a series of named ranges and then loop through the names in each, match each name with a name in a master list (with a flag as an image), add an e-mail hyperlink to that flagged name and copy both to a new cell.

View 2 Replies View Related

Compiling Data From Multiple Workbook Into A Line By Line Master Schedule

Mar 30, 2013

I have about 180 workbooks which I need to compile into a Master Schedule.

All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?

Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?

View 1 Replies View Related

How To Make Function That Works On One Line Work On Multiple Line

May 19, 2014

I have this function that works on line 3 and if the conditions are met, the result is 1

=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))

Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1

I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,

View 9 Replies View Related

Convert Macro In 1 Line To Multiple Line Code

Dec 8, 2007

i hv following code

(i use generate macro)

my question is how to arrange the code from one line to multiple like :-

following code show in excel macro environment is one striaght line.


' Create new var on yr , and replace 2006 to CY06.

ActiveCell.FormulaR1C1 = _

View 9 Replies View Related

Multiple Line Texts To A Single Line?

Mar 30, 2014

I have a multiple line texts I want to convert it in single line like for Example:

The following contents is to be converted in a single line

contents:

[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on

Result:

[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on

View 4 Replies View Related

Constant Variables - Declare Name In Separate UserForm As Constant

May 8, 2012

I have a userForm (Form1) that contains a persons name that I would like to reference in a separate UserForm (Form2). In the separate UserForm (Form2) I need to reference this persons name many times, so I was wondering if there was a was to declare this name in the separate UserForm (Form2) as a constant. Only thing is that a constant, to the best of my knowledge, must be an expression and not a variable. Mainly, I'm trying to avoid declaring the myName variable in each Sub within Form2, which it will be needed for a ton of Sub's.

Code for Form2: Const myName As String = Form1.txtName.Value

View 5 Replies View Related

Multiple Sum If Variables

Feb 5, 2010

Can I put two variables into a SumIF? forexample I want to sum Column C if Column A is equal to Apples and Column B is equal to Oranges, then sum Column C. Is there a quick formula?

View 3 Replies View Related

Multiple Variables To Calculate A Value

Jun 26, 2014

I am looking for a syntax to ask a question with three variables

As an example
If
Blade size = 114 (only 3 blade size choices)
and
the Panel Size is between 500 and 700 ( This will also be dependant on the blade size)
and
the tilt bar is clearview (Three choices)
then
the result will be x = 182

The answers will depend on the above variables: 154, 159, 179, 177, 182 and 202

Screenshot 2014-06-26 14.21.41.png
Screenshot 2014-06-26 14.23.53.png
Screenshot 2014-06-26 14.26.11.png

View 3 Replies View Related

Vloookup With Multiple Variables ...

Sep 30, 2009

I need to count up the scores from a questionnaire I have developed, which I am having trouble coming up with a formula for.

I have 5 different types of sales channels in column A. In columns C, E and G there is the call method they use (inbound, outbound or both) with a 'Y' / 'N' option next to it. Basically, I need a formula that if a sales channel has a Y next to Inbound, then the value 'Inbound' to be returned to the destination sale and if it has a Y next to Outbound then the value 'Outbound' returned to the destination cell and so on.

I have attached a spreadsheet to make my problem easier to understand.

View 7 Replies View Related

Multiple Variables Count

Oct 28, 2009

I'm trying to use two variable to calculate a count.

In my attachment I have Name, Balance, and Disabled for the data.

I would like to find out how many names has a negative balance and have a "Yes" for Disabled

In the Summary part, I can find out the count of who is disabled, but can incorporate the negative balance.

View 4 Replies View Related

Testing Multiple Variables At Once

Feb 18, 2010

This code is functional but very redundant and I figured that has to be an easier way to go about this.

View 5 Replies View Related

If Statement & Multiple Variables

Jun 9, 2009

I have in cell c40 a data validation list with source equal Royal (=Royal) has been created.

Royal is a namebox that has a defined list of 7 options (6 actual options plus one that says "select via drop down") :

FA4 = Select via Drop Down
FA5 = option 1
FA6 = option 2
FA7 = option 3
FA8 = option 4
FA9 = option 5
FA10 = option 6..............

The concept is that FA5 is associated with a value defined in FB5, FA6 is associated with FB6, so on

What I want to happen is when I select a value via the drop down selection in C40 eg. "Option 1" that in cell D40 the value associated with Option 1 (found in FA5) returns the value found in FB5 ($10).

How do I do this? I have tried a number of "if" statements but no luck.

View 2 Replies View Related

Counting With Multiple Variables?

Jan 23, 2013

I'm trying to count a range but I have multiple criteria which I would like to use, I have attempted to use countif/sumproduct with no avail. The data is spread over two columns, one contains the rank of various employees and the other is the number of hours they have worked. I am trying to count how many employees fall in to set hour ranges.

View 2 Replies View Related

If / And Formula With Multiple Variables

Nov 25, 2013

Writing a formula for the info below. Here is what I need basically. If B2>2, then I need it to count all central and field, STK and NSTK in column D.

location
days
stock type

Central
3
nstk

field
1
stk

[Code] ...........

View 9 Replies View Related

SUMPRODUCT Multiple Variables

Aug 24, 2009

I trying to figure out how to calculate a field based off multiple variables that are dependent on another cell range.

I'm looking to count everything in the C8:C49 cell range that contains either "BETA" or "FINAL" in the cell but ONLY if the F8:F49 cell range contains "In Test")

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved