I have a multiple line texts I want to convert it in single line like for Example:
The following contents is to be converted in a single line
contents:
[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on
Result:
[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on
Is it possible to have multiple VBA commands on a single line with a separator ( ; or , ) of some kind?
I am trying to keep my code as short as possible (from a scrolling perspective) and would like to have something like the following:
Dim MyArray(1 to 20, 1 to 3)
MyArray(1,1) = "Sheet1" ; MyArray(1,2) = "D8" ; MyArray(1,3) = "D9"
MyArray(2,1) = "Sheet1" ; MyArray(2,2) = "C49" ; MyArray(2,3) = "w3"
MyArray(3,1) = "Sheet1" ; MyArray(3,2) = "A23" ; MyArray(3,3) = "AB12"
MyArray(4,1) = "Sheet1" ; MyArray(4,2) = "Z19" ; MyArray(4,3) = "W12"
MyArray(5,1) = "Sheet1" ; MyArray(5,2) = "Q32" ; MyArray(5,3) = "Q23"
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
Single coding line into multiple using underscore
How can i break this up
I import data into an excel spreadsheet where a unique job number may have multiple costs against it. These import as separate lines, repeating the job number.
The data imports on a sheet called 'DataImport'. From that sheet I transfer some of the imported fields onto another sheet.
What I need to be able to do is transfer the job number and a sum of the costs onto the other sheet.
The data is run regularly and I delete all the fields on the DataImport sheet in the macro each time the import is run.
I have this function that works on line 3 and if the conditions are met, the result is 1
=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies View RelatedOur small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
Difference between these two statements. The first one works perfectly while the second one returns an error. Also why is the best scenario to use IF and Then on a single line?
[Code].....
2nd one with error:
[Code] .....
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A
B
C
1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street
I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.
vbaStk.JPG
What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.
I'm new to VBA and I'm not so sure what I'm doing with vba codes
Why is the VBA for putting a simple border around a cell so convoluted. For example cell A2:
Code:
Sub CellBorder()
Range("A2").Select
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
[Code] ........
So many lines to put a simple - single line border (square) around a cell.
I need the Service Order tab to populate with data from the CPR tab based on the IO#. Since there is more than 1 occurrence of an IO# I need a formula to list the 1st, 2nd, 3rd, etc result of the vlookup in the cell under the 1st.
=VLOOKUP($E$2,CPR!$L$4:$AA$12,2,FALSE),
When I drag this down I get the 1st occurrence of the IO# 777 I need all of them.
B C D
Atex ID#(unique id) Campaign name Site
Row 7 1st occurrence of IO# 777
Row 8 2nd occurrence of IO# 777
Row 9 3rd occurrence of IO# 777
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
Currently I am using Excel 2000. I did a search and couldn't seem to find the answer I was looking for. Hopefully someone can help. It would be greatly appreciated since I have been trying to figure out how to do this for days.
I am trying to create a worksheet that will pull info from a row on one sheet to another sheet based on the name; then continue to list the info on each line afterward until there is no more of the that particular criteria. See below (this is just an example to simplify the data but would need the same process):
This would be the data on sheet 1:
Name Bonus Commision
Tom $45 $50
Mary $25 $75
Mary $30 $80
Tom $60 $50
Tom $90 $25
What I would like to do is have 2 more sheets. One would be Tom's sheet and the other would be Mary's sheet and it would look like this:
Tom's Sheet:
Tom $45 $50
Tom $60 $50
Tom $90 $25
Mary's Sheet:
Mary $25 $75
Mary $30 $80
I am not completely familiar with all of the functions in Excel and compared to you guys I am a complete novice.
Is this possible to do in Excel without using a macro?
I am trying to count the number of commas in each line of my Excel file. So I first decided to count the total number of rows and then count the number of commas in each row. I wrote this code. But I keep getting an error saying Next without for.
Sub Give_The_Last_Row()
Selection.SpecialCells(xlCellTypeLastCell).Select
LastRow = ActiveCell.Row
[Code]....
I have to worksheets: Sheet1, Sheet2. In sheet 1, I have some data like this (in first col is 1, second col is a, third col is c etc. ):
1 a b c d
2 e f g h
.
.
.
.
I need in sheet 2 in range A1(only in this range one big text), something like this: a,c,e,g ........ ( row1-col2,row1-col4,row1-col2,row1-col4 ......) ( separated by ","). The number of rows from sheet 1 is variable. The dataf a,b,c,d,e,f,g,h ... is some random text.
Showed a line chart using 2 vertical axis where the first was a single line along the graph (ie. 42%) then the second data series was a single data point that was above or below the line which easily showed if the result lied above or below the threshold.
How to get a straight line across the body of the just to be used as the theshold line?
I had the following code that worked great with Excel 2003, but I receive an error with Excel 2007.
Dim Master As Workbook
Set Master = Workbooks("Master.xls")
For Each wb In Workbooks
wb.Activate
If wb.Name Like "S04*" Then _
If Not Range("A2") = Empty Then _
Range(Cells(Rows.Count, 1).End(xlUp), Range("A2")).EntireRow.Copy _
Master.ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Offset(1)
Next wb
I receive error 1004 "application defined or object defined error" when it tries to paste to the "Master" sheet using the the above lines.
Is there something in the formatting that has changed with 2007? I'm guessing I have to slightly change the line in bold.
My basic problem is I compile a newsletter for my company. Many people write me E-mails and i paste their "daily accomplishments" into a template. My question is if there is an easy way to insert bullets at the beginning of each line inside the cell. My company wants it prepared with a certain type. I am attaching a sample.
View 2 Replies View RelatedI have some code (authored by Dangler) that i want to pull not just one range but also the contents of one specific cell and then copy the range and cell to a line on another spreadsheet.
Question:
f .Cells(i, 8).Value > 0 Then
.Range(Cells(i, 1), Cells(i, 200)).Copy
Sheets("all").Range("a65536").End(xlUp).Offset(1).PasteSpecial (xlValues)
End If
I want to add a single cells contents to the LINE that is being copied .... something like this...
f .Cells(i, 8).Value > 0 Then
.Range(Cells(i, 1), Cells(i, 200)) AND A1.Copy
Sheets("all").Range("a65536").End(xlUp).Offset(1).PasteSpecial (xlValues)
End If
the output would be like this: CELL CONTENTS, RANGE CONTENTS
or
K21, 40012122 400 450 450 50 001 BAGS
I'm trying to search for a column by looking for a specific column header and then format the entire column in the specific number format desired, but I keep getting an error message with this line.
Code:
With Rows("1:1")
.Find(what:="Go Live Date").Column.NumberFormat = "m/d/yyyy"
End With
In VBA, is it possible to write to a text file, on 1 single line (without carriage return or line feed) the values of a dynamic array? For instance, I have the array:
Dim my(n) As Double 'n is changeable
my(0) = 0
my(1) = 1
my(2) = 2
.....
I want to write to a text file, like this: Write #filename, my(0), my(1), my(2) '..... until my(n) but n is changing
I want them on 1 line, because I use the other direction (up - down) for other things).
I have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
View 2 Replies View RelatedWith the attached spreadsheet i cannot workout how with the line graph not to continue the line if there is nothing in row 10 of the table.
for eaxmple if there is no value in cell M10, i would like the actual addtion line to stop at the last value on the graph that was in L10.
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
I have a chart sheet with a line graph that contains two series: I want to change their thickness, but I am not able to format it with VBA.
View 6 Replies View RelatedCreating a macro that will identify the last blank line in column J and insert a line in it? The macro will need to look from the "bottom" as there is blanks cells above the last line.
View 5 Replies View Related