Looping Through Dynamically Created Command Buttons?
Apr 27, 2014
Code to create buttons on a userform. I have adapted his code to do what I want. The code he gave me was:
[Code]....
In the Class Modules:
[Code] ........
All buttons when created are coloured yellow. When a button is clicked, it turns blue (to indicate that the button was clicked. However, my problem is that when another button is clicked, it also turns blue as coded. This means that both are showing blue colour. I want all other buttons to turn yellow and only the button clicked should turn blue.
I have a userform that has one combobox at the top created manually. When the userform is opened, the user select an option in the combobox (these options are taken from a range on 1 worksheet). From the selection of the combobox, I use the comboxbox's change event to create and display 5 columns of textboxes and 2 columns of command buttons on the userform.
The number of rows of textboxes created depend on the option selected from the combobox since each option links to a different range of cells. Each of the 5 textboxes in each are set to be ".enabled = False" and display text as per the cell values within a range on another worksheet. 2 Columns of command buttons are created at the end of each row of textboxes - 1 is enabled and the other is not.
The creation of the textboxes and command buttons works as required. However, I am having problems with setting click events for each command buttons. When the 1st column of Command buttons are created, I need the click events to be created and filled out with 2 actions:
1. Enable all textboxes in the same row as the command button
2. Enable the other command button in the same row.
Here is the code I have so far that creates the textboxes and command buttons.
Each of the 5 textboxes and 2 command buttons have a unique name so the 1st row will have textbox and command button names of cTxtA1, cTxtB1, cTxtC1, cTxtD1, cTxtE1, CmdAmend1 and CmdConfirm1. The 2nd row will have the same names but with 2 on the end and so on. The bold sections is the code for the creation of the command buttons that I want click events for.
Code:
Private Sub CboTeamSelect_Change() Application.ScreenUpdating = False If CboGroupSelect.Value = "" Then Exit Sub Dim cTxtA As Control, cTxtB As Control, cTxtC As Control, cTxtD As Control, cTxtE As Control Dim CmdAmend As Control, CmdConfirm As Control Dim iNum As Integer Dim TxtTop As Long
I'm trying to write a code to make a number of buttons visible depending on a cell value
I have 10 command buttons all are invisible and I want to show only the first x x is the value of cell "A1" in "Sheet1" (will be from 1 to 10) Command buttons names are default names (CommandButton1, CommandButton2, ... , CommandButton10)
I am having a excel vba code that copies tab from different excel file and then i want to use in sql query. It is always giving me error saying that "The Microsoft Access database engine could not find the object 'rahul'. Make sure the object exists and that you spell its name and the path name correctly. If 'rahul' is not a local object, check your network connection or contact the server administrator."
Though, when i rerun the macro after reopening the excel file, it is working fine. Seems like tabs dynamically created cant be used. Is their any way to get it done at runtime? I want to delete new created tab once data from new tab is inserted to required tab.
my macro calls first copyAllSheets(filename) and then writeSheet().
Code:
Private Function copyAllSheets(ByVal fname) Dim destSheetCount As Integer Const FUNCNAME = "copyAllSheets" On Error GoTo ErrorHandler Set wb = Workbooks.Open(fname) destSheetCount = ThisWorkbook.Worksheets.Count + 1 wb.Worksheets("Buyer").Copy after:=ThisWorkbook.Sheets(1) ThisWorkbook.Worksheets(destSheetCount).Name = "impBuyer"
[code]........
This is part of code so probably it wont be easy to understand the flow. but mainly i want to know how can i have newly created tab as table_name.
The following code dynamically creates a number of textboxes within a frame with a label right next to it. There are two classes.
[Code] ......
The two classes look like this:
[Code] .....
This works just fine to create the dynamic series of textboxes and corrosponding labels. I am having trouble with the reference between them. for example (within the class module):
[Code] .....
As shown, the reference to the corresponding lable from within the class doesn't work. How to reference the correct corresponding label.
Basically, I am taking user input to determine how many textboxes to create during runtime, and want to call the contents of those textboxes after the user has put something in them.
I have 100s of name ranges in my spreadsheet. I am using a series of drop down boxes for the user to select the info that they want to see. Based on the dropdown box, the macro "dynamically generates" a range name from which to pull the info.
For instance, if they Select Manager = Terry, Analyst 1, and Month = Jan, then the range name would be JanTA1
The if statement would dynamically create this name by concatenating the info
If manager = Terry mnger = "TA" if analyst = 1 anlyst = 1 if month = Jan mnth = "Jan"
rangename = mnth & mnger & anlyst
So, I am dynamically creating the range name based on user selections...then to display it, I want to set the display cell = to the value
For a form that dynamically creates a series of text boxes and labels, does anyone know how to change the caption of a dynamically created label to display the value of a cell in a worksheet? The cell in the worksheet changes according to input on the text boxes. In the form's code, I have:
Dim newLblFreq As MSForms.Label Set newLblFreq = Me.Controls.Add("Forms.Label.1", "lblfreq" & i, True) newLblFreq.Caption = Range("V" & i).Text & " Hz"
But once the label is created, the caption won't change, even if Range("V" & i) changes...............
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
I have a userform with a single blank multipage. At runtime additional pages are added, the number of pages depends on input from another userform. Six frames, containing labels, textboxes and comboboxes are then added to each page.
I need to be able to use the textbox and combobox change events of these dynamically created controls to perform lookups and calculations. Although I can name the controls at the time they are created, it is not feasible to write code specifically for each control (I can have over 1,600 text boxes distributed over 9 pages, for example).
Having searched for some time on how to achieve this I believe using a class module is the way to go. However, how to use a class module is just not sinking in I'm afraid.
HTML Private WithEvents mpTextBox As MSForms.TextBox Private WithEvents mpComboBox As MSForms.ComboBox
Private Sub Class_Initialize() Set mpTextBox = MSForms.TextBox Set mpComboBox = MSForms.ComboBox End Sub
Private Sub mpComboBox_Change() MsgBox "ComboBox value has been changed." End Sub...........................................
I have created a toolbar with buttons that run macros. When the macro is assigned to that button the macro will run fine. However, when the file name of the excel workbook has changed (file relocated or name changed) then the macro (button in the toolbar) does not work and has to re-assigned in the toolbar. Is there anyway of getting around the problem of having to reassign the macro to the toolbar button whenever the file name/directory changes.
but now i want that when this new sheet will open there will be some labels, textboxes and buttons n etc will be appear on that sheet so how can i display these elements on new sheet dynamically ??
I have created a button name "Add Power Source" on excel sheet that adds a table and a button(named "Add Row") to the sheet.Whenever the user clicks the "add power source" button a table and a "Add new row " button is created .This "Add new row" button is used to add rows to the table. Now suppose the user has pressed the "add power source" button 5 times,so that there will be five table on sheet and each having a "add new row " button associated with it.When the user wants to add a new row to the table 2 say .How will I come to know in which table the rows are to be added using VBA.
I am trying to use a For Next loop to loop through several option buttons on a worksheet in order to set the value of each to false. I cannot seem to get the code right.
I am trying to provide a search string and then loop round searching for this search string until the beginning find cell is found again however I am having problems making my code work - here it is:
I have a range of cells (A1:D5) identified within a worksheet (worksheetA) as part of a user input form.
When a certain condition exists, a routine is executed that copies a range of cells (C1:F5) from another worksheet (worksheetB) to this defined range. The copied area consists of two command buttons. They get copied and pasted no problem.
When I want to reset (blank it out of its contents) my range in worksheetA from I copy another range over of just a range of blank shaded cells. However, doing this does not eliminate the command buttons left in the range on previous pasting.
How do I delete these command buttons left from previous pasting activities when I wish to reset my range?
i try run macro with commandbutton, but it doesnt work. I insert button from "control toolbox" then i create a macro. Then i wrote this macro to "Private Sub" but it still doesnt work.
When i click on button, it only open editing macro, or select the button.
I made a userform to calculate the net weight of a package by taking the gross weight and deducting the amount of boxes included in the package. The most boxes possible is 25, so I used 25 command buttons numbered 1 to 25, so users only have to press the desired amount of boxes for the calculation to begin.
But that also means I've got 25 subs containing the same formula, and that's a bit much. I'm pretty sure this could be done more efficiently,
I have a multiple of command buttons that I want to make visible. I have the following code which I am trying to get to work. Maybe I am barking up the wrong tree.
I can't write macros, so have to create them by actually recording the process. I did that just now and then copied it into the Command button. When I run it from Tools>Macros, it works, but when I run it using the Command button it fails.
I'm trying to copy and paste values current MTD figures (P18:P39) to previous MTD area (W18:W39), but the command button fails at this selection. Cells 28-35 are blank, but I don't think this makes any difference, as I've tried the command button with those cells zeroed out.
This is what I recorded initially; this works from Tools>Macros
Sub Macro1() ' ' Macro1 Macro ' Macro recorded 04/01/2008 by Lucertola ' ' Sheets("Reconciliation").Select Range("P18:P39").Select Selection.Copy Range("W18").Select.....................
I have a workbook with some command buttons that I created a while back. The buttons used to work fine. But after installing a new computer, the spreadsheet no longer works. I can step through the code fine, but when I try to click on the button, nothing happens.
Is it possible to create a number of command buttons, depending on the number of lines on a worksheet, and then have the code attached to the command buttons execute based on the position of the buttons on the sheet. For example, if I have a button positioned over, say A3, can the code execute based on the content of another cell in the same row. I imagine that the button would have to be linked to the cell, but I cannot see how that is achieved.
I was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
I have 3 cpmmandbuttons in a spreadhseet named "Controls" . viz
Trim and Edit Base DataCreateReportArchive
They are always run in the same order.
My Aim is to disable and gray out the Archive button once its assigned macro is run(by clicking it) so that it activates only next time that the workbook is opened.
In the attached workbook there is a UserForm with five (5) command buttons along the bottom of the UserForm. I'm familiar with making them the same size and aligning tops. What I'm struggling with is how to distribute them horizontally. That is, to get the same amount of "white space" between them.
I need to get the code for a "copy" command button and "select all" command button. I need both for a text box.
Scenario: I click on the "select all" command button, it selects whatever is in the text box and then the "copy" command button copies all of that. So then I would be able to paste that in another program.
