Delete Rows Meeting Condition For Pivot Table Source
Apr 29, 2008
My worksheet has a report name in cell A1, a brand name in B2, price name in C2, and color in D2. Row 3 has a table header in cell range A3:E3 followed by rows of table contents at the end of which is a row of empty cells. This sequence repeats itself for a new product: a row with the report name in column A, followed by a row with a new brand name, price and color in the same columns as before followed by the same table header and table contents. The number of products (with the previously mentioned details and table) vary so I would like to write a macro that is not dependent on a set number of products. Each table varies in the number of rows but never contains empty cells and always ends with a row of empty cells. I want to delete all rows with the report name and have all products in one table with the brand, price and color added to the table header and contents.
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
I have a huge data set with survey data (sample attached: sample.xlsx). Column headings: survey questions Row headings: respondent identifiers (names) Row data: answers to questions (numeric values, only five answer options 1,2,3,4 or 5, no blanks)
I need to build that kind of pivot table:
Rows - list of particular questions (i.e. questions no. 3, 7 and 12) Columns - list of all diffrent answer entries (eventually, it will be 1,2,3,4 and 5) - it could also be questions in columns and answers in row (no difference) Values - count answer entries (i.e. how many answers "5" are on quesiton 3)
------ UPDATE: explanation added.
The reason I need pivot tables: i'll have to cross analyze multiple sets of questions. I'll have to do such cross-analysis 100+ times, so, writing a formula for each time does not quite work...
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
I'm trying to write a macro that will create a pivot table, and am getting an Error code 1004: Cannot Open Pivot Table Source File "Sheetname". My code is below. I've tried to note what each section does, and it all seems to work well except for the Pivot Table creation.
In the included sheet I have 5 groups of data with five categories in column A. Current, Plan, Plan Var, Prior, Prior Var. I have included the button “Show Options” that opens the userform I created and gives 5 options. What I want is the user to be able to select any number of these options and then upon “ok” the rows in the sheet that weren’t selected are automatically hidden. If the procedure is completed again and a differen set of options is selected I want it to unhide any hidden ones that were selected and hide any that werent selected.
So if just current is selected the sheet will show 5 rows of current and nothing else. If current and prior are selected it will show current prior current prior current prior... etc.
I have some hide code that I created in the file as well.
A friend is trying to change an entire row's color based on a specific cell's value in that row. He cannot use conditional formatting. This is the code he's tried, to no avail:
Sub temp() totalrows = ActiveSheet.UsedRange.Rows.Count For Row = totalrows To 2 Step -1 If Cells(Row, 25).Value = 4 Then Rows(Row).Select Selection.Font.ColorIndex = 3 End If Next Row End Sub
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
I have a large number of user inputs which is linked to a data sheet. In this sheet are rows to be kept and rows to be deleted. See attached example...
I need code to delete all other similar rows than the one with a number (1) in the field Complete. There can only be a number (1) in the field Complete in one of the rows.
But if there is no number (1) in the field Complete in any of the rows, no rows should be deleted.
The data sheet is to be transferred to Access afterwards.
I need a macro to sort through a large table of data entries and remove all repetitive entries (entires are based on a number in column A with data entries in B through EY) so i need to locate repetive numbers select entire row and paste them in a new location.
But i cant sort the data as it will change the entire order and i need the data intact. the user will specify which entry number to search for.
I know some sort of search and loop function would work but i just cant seem to make them work.
Excel Range A1 - D500. Data located in column C. I would like to delete the rows in this spread sheet that do not contain any of the following 3 prefixes of part numbers from column C: X-SXP, X-SCM and X-SBP. There are many part numbers but only parts with these 3 prefixes are needed. Part numbers are 10 characters long after the prefix. If any additional information is needed, let me know.
I viewed the Delete Rows Meeting Conditions thread, but the input value in that code is for what you want to delete, and I need to delete everything not meeting the data I want to keep, which is about 30 different part numbers. Also, that appeared to only offer one input and not 3.
I have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
I have searched for this topic, and I have read http://www.ozgrid.com/VBA/row-delete-criteria.htm, I don't really understand it though. I think what I want is simple, I want to search column A for cells containing the word " Total" - if any are found I then want to delete the corresponding rows.
I'm trying to create a Pivot table with various columns comparing information of executives from various Private Equity Firms. Some of the additional columns are Industry Specialty, Harvard Grad Year, My companies contact, etc . . .
The goal is to allow me to then query this information so if I wanted to see all Bain Capital employees who graduated with an MBA in 1990 and their specialty.
My question comes in trying to set up my source list for the data under Industry Specialty and my companies Contact. Is there a way I can set a value for these cells and mark them as an "AND" in the source if there are multiple contacts or industries that one of the Private equity executives is linked too, that would then allow them to be displayed as so when I create the pivot table?
I was wondering if anyone knows how to change the souce data for a Pivot Table? Eg if I have the Pivot table looking at Columns A & B lines 1 - 20 and I want the Pivot to also include Column C and lines 21 - 50, how would I do this? for a chart I can just right click and select the "Source Data" option but it seems that this is not available for Pivot Tables.
A co-worker of mine set up a pivot table using data saved on an external data source on a shared drive. I would like to create a similar pivot table myself, linked to his pivot table so when he gets updated data, my pivot table also will update accordingly. My question has to do with the pivot table data source. How do I copy the connection?
How can I possibly find the source path of a file used to build a pivot table. So basically the pivot table is using an external source and I'm unable to find it.
I would like to setup a macro that brings up a dialog box asking for a date in a specific column. Once that date is entered in the dialog box, the macro would then find all rows before that date (in that specfic column) and delete them.
I have a pivot table created. How do I determine which sheet it is pulling the data from, hence the source of the pivot table? Also, if can you go into source and modify data points, then in pivot table, will the results would be automatically modified with updated data points?
I've got a bit of a problem revealing pivot table source data, so just wondering if anyone know how to reveal it? My colleague sent me the spreadsheet, I can see the pivot table, but I can't find the source data that the pivot table links to.
I am using pivot tables/charts for drilldown reporting. After running a complex macro to consolidate multiple reports into one range, I need to generate pivot tables and charts.
These reports will change month to month in the number of entries they have (template will be identical), and therefore my data source range for the pivot table is bound to change. Therefore my question is, how to develop a macro that will dynamically change the source data range to the amount of rows?
I am using pivotable with access queery as the source.
When I set it I cuse that external source browse tool, but it seems to only recognize the source if the dive is the same. When I go downstairs to try on a users computer there dirive letter(K is different than my (H and it does not work.
why the data reference for a pivot table is changing after I email the workbook to a client. The source data and the pivot tables are all part of the same workbook and I can't understand why its saying can't find source data. Excel 2007 is being used on both computers.
I am using pivot tables which were created by another (no longer contactable) and have found two fields in the field list which are not part of the source data i.e. neither are column headings but are used in the pivot table.
My questions are:
1. How are these field created?
2. How can I examine these fields for formulae (as I have found one of them returns an incorrect value)?
Field1 return a numerical value which is the difference between two columns Field2 shows this as a % (but incorrectly)
My fixed asset software will not allow me to show multiple individual months of acquisitions. I can export each month. This will create a separate spreadsheet for each month, but the problem is that each spreadsheet may contain the same asset, but additions to that asset.
