I have a lot of calculations going on so I thought I would name some of the cells where factors come from to make it easier to follow.
I made a typo and named a cell wrong, is there a way to delete it? Right now I have a correct and incorrect name attached to the cell.
CTRL/END key combination should goto and select the last cell in a Worksheet. So for a Worksheet using Rows 1-4135 and Columns A-Z it should indicate Z4135 as the last cell
My current worksheet uses these Rows and Columns, but CTRL/END indicates last cell as being AB4506. (Inflated by 371 Rows and 2 Columns)
Deleting the unwanted Rows or Columns, or "Clearing contents" of them does not affect the result given by CTRL/END which still shows AB4506.
How can I adjust/correct the last cell indication?
Usual work-around is to select the wanted portion of the worksheet and copy it to a new blank worksheet, but is there an easier way?
I have one column: in the first cell comes text (beginning either with the letter "L" or "R") and afterwards, in the next cell, comes a number (either "7" or "8"). Basically the column is made up of alternating cells containing either text (code of a movie) or numbers (responses to the respective movies). I want to find a formula which writes either:
- "correct" if the number "7" follows a cell containing the letter "L" or an "8" follows a cell containing the letter "R";
or
- "incorrect" if the number "7" follows a cell starting with the letter "R" or the number "8" follows a cell starting with the letter "L".
Basically the 8 is always correct with an R and the 7 with an L: ...
Surely it's user error, but it honestly seems like Excel is not calculating 2 numbers correctly. At work, we have office 2010 where it is not calc'ing correctly; at home I have 2007 and it's fine, but anyway, here's my situation:
Cell A1: 0.003529
Cell B1: 0.48
If i put in Cell C1: "=B1/A1" i get a value of 136.000000 But that's not correct, it should be 136.01587... But if in Cell C1 i put "=0.48/.003529" then i get 136.01587...which is correct.
Why does using cell references in my formula give me the incorrect value?
I have tried everything I can think of to get this to work.
I am searching column B for anything containing "Tease", then if found, look to see if column J contains a "W".
Excel doesn't report an error, but this doesn't work:
=SUMPRODUCT((B3:B40="*Tease*")*(J3:J40="W"))
I am having problems with the following formular in that it does not return what I am expecting.
I have 2 columns of data that hold Y/N values and I would like either "Yes" or "No" to be displayed in Col C for the 4 possible combinations that the interaction of Y and N in columns A&B give.
The data is
Col A:A = Y or N
Col B:B =Y or N
The four possible combinations and outcomes are:
Col A = Y & Col B = Y outcome in Col C = "Yes"
Col A = N & Col B = Y outcome in Col C = "Yes"
Col A = N & Col B = N outcome in Col C = "No"
Col A = Y & Col B = N outcome in Col C = "No"
The formular I have tried is:
=IF(OR(AND(A1="Y",B1="Y"),A1="N",B1="Y"),"Yes","No")
However while three of the outcomes for the combinations are correct (N/Y, Y/N, Y/Y), the output for the N/N combination is incorrect and returns "Yes" instead of "No".
Just wondering if anyone has any ideas as to what is wrong with this?
I've created a spreadsheet to 'translate' number/letter combinations (sub-levels in the UK education system) into a numerical value. I looked up how to do this on google and, through a bit of trial and error, worked out that the lookuptable has to be in alphabetical order, etc.
My problem is when I enter in any of the 'P' values (see attached), it returns 0.5.
I have the following code, taken from an example off the web. But I would like to change the save path to just C/: rather than copy the save path of the original file...I would also like to not close the active workbook that I am working in....how can i achieve this?
Sub TwoSheetsAndYourOut()
Dim NewName As String
Dim nm As Name
Dim ws As Worksheet
If MsgBox("Copy specific sheets to a new workbook" & vbCr & _
"New sheets will be pasted as values, named ranges removed" _
, vbYesNo, "NewCopy") = vbNo Then Exit Sub
With Application
.ScreenUpdating = False
On Error GoTo ErrCatcher
Sheets(Array("Copy Me", "Copy Me2")).Copy
On Error GoTo 0
For Each ws In ActiveWorkbook.Worksheets
ws.Cells.Copy
ws.[A1].PasteSpecial Paste:=xlValues....................
I have two pieces of code in module 1 and module 2 respectively:
This code is meant to find the first row number that has a string value of "" in column A:
HTML Code:
Sub Macro1()
Dim cell As Range
Dim r As Double
Dim p As String
For Each cell In Worksheets("stock in").Range("stockcode")
p = cell.Value
r = cell.Row
If p = "" Then Exit For Else
Next cell
End Sub
BTW column A will contain formulas that evaluate to "" so I assume cell.value will = "" even if it contains a formula?
In the second module a sort is executed on the range based on the number of rows:
HTML Code:
Sub Macro2()
'
' Macro2 Macro
'
Call Macro1
ActiveWorkbook.Worksheets("Stock in").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Stock in").Sort.SortFields.Add Key:=Range("A4:A" & r) _
, SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
[Code] .......
My code is falling down because I think my variables arent scoped right or my code is in the wrong place. Also macro1 will eventually be executed from a button on a different sheet (I dont know if this will matter).
The whole point of this code is to get around the fact that if you perform A - Z sorts on cells that contain formulas those that evaluate to "" will be at the top leaving lots of blank rows before actual visible data.
I have a line of code that compares cell values with a variable.
Code:
dim rmycell as range
If rmycell.value = MyTarget then
This works fine when rmycell.value is empty or has a value. However, sometimes rmycell has a #VALUE! Error. When debugging the code I can see this error showing rymcell with a value of "Error 2015". The MyTarget variable is "abcdefg", so the If statement should resolve as
Code:
If rmycell.value = MyTarget then
becomes
Code:
If Error 2015 = "Abcdefg" then
Which should be a negative result. Except it isn't. The code that is conditional on a positive result runs whenever there is a #VALUE error, just as if the 2 values were equal.
I'm trying to create a new function in Excel and for some reason the syntax is incorrect and it won't let me use it in the sheet. I do not know what I'm doing wrong so any help would be appreciated. This function will allow me to interpolate the term structure of interest rates between dates (I think) My code is
Function INTSPOT(spots, year)
'Interpolates spot rates to year
Dim i As Integer, spotnum As Integer
spotnum = spots.Rows.Count
If Application.WorksheetFunction.Count(spots) = 1 Then
'Single rate given
INTSPOT = spots
Else 'Term structure given
If year = spots(spotnum, 1) Then
INTSPOT = spots(spotnum, 2)
Else
Do
i = i + 1
Loop Until spots(i, 1) > year
INTSPOT = spots(i - 1, 2) + (spots(i, 2) - spots(i - 1, 2)) * _
(year - spots(i - 1, 1)) / _
(spots(i, 1) - spots(i - 1, 1))
End If
End If
End Function
In column H I have a list of numbers seperated by a space, the number of lines can change. In column L I have a list of numbers which can change either expand or retract.
I would like to check each cell in column H and if any numbers are not listed in column L then it/they should be shown in column G.
Example1 H2 shows 6 11, therefore cell G2 should show 11.
Example 2 H6 shows 5 6 9 11 therefore G6 should show 9 11
Sheet1 HIJKL1Container ID26 11 135 8 11 245 7 11 355 7 565 6 9 11 675 6 9 Excel tables to the web >> Excel Jeanie HTML 4
I have a userform on which there is a frame containing 8 option boxes. After a query, the results are displayed in the form. If I have a value of 1 in a cell, optionbox1 is checked; a value of 2 checks optionbox2, etc. It works great EXCEPT when first initialized. At that point, it checks the last optionbox, even if the number is 1. I have built a next and previous feature to scan the data, and when I return to the first entry, the correct box is checked. I tried coding blanks into the fields prior to populating them, but I still get the same results. Is there some explanation available so that I may remedy this? I'd really like the first piece of data to be correct.
View 2 Replies View RelatedI have a text file which have a column with data like xxx . however, when I open the file with excel and it displayed incorrect value like xx.xxx, x.xxx
I tried to change the format cell to text, but it still cannot display original data...
Usually when you try to open a file that someone else is using, it lets you know the file is in use, and lets you know who is using it. However, the situation I have is that when a user tries to open the file that is in use, it tells them that the file is in use, but gives them the wrong user who is using it!
For example, User1 opens the file and closes it again. User2 comes along and opens the file and stays in the file. User3 comes along and tries to open the file, but instead of saying User2 is using the file. It says User1 is using!
The file we have was originally built in Excel 97, but we using it through compatibility mode in Office 2007. The file is needed by various users, but putting it on shared access is not an option.
I have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
View 14 Replies View RelatedIf a player does not qualify, their name and score should not be included in the final results.
I currently have their Name missing, but the NUMBER is showing up.
I've explained more in the attachment.
INDEXARRAY.xlsx
I have a query around a hyperlink.
Is there a function that i can add to a cell to display if the hyperlink path is valid
i.e., to show that the hyperlink path does not exist, I am feeding the hyperlink from 2 cells ...
In the attached spreadsheet I'm using VLOOKUP to create a cross reference between worksheets JS and ITEM. If you will look at the ITEM worksheet cell reference H13 & H14. The correct value for H13 should be AMC, not 729. Is there a way to use the value in the Class column and Item ID column in combination to get the value AMC? Would MATCH & INDEX work? I'm not familiar with Match & Index. I'd appreciate some help here. I've got 15,404 records to evaluate this way.
View 14 Replies View RelatedOn the PROPOSAL tab, at I41, a simple multiplication instruction is wrong. It's multiplying 72*186.53 which = 13430.16 in the real world, but on this sheet 11 cents are missing. I'm pulling my hair out on this one....
View 4 Replies View RelatedI have a problem with VLOOKUP function and I am looking for a workaround.
SheetA I have a column of business names and another column of the category.
SheetB has a list of credit card transactions and a column of categories - The results obtained from incorrect results from SheetA...
This is so simple, yet Excel doesn't give the correct value. So, here you go, I only have 2 Cells and 2 Labels. One Label for one Number and the other Label for the other Number.
For the Pie Chart I chose Cells:
Cell B36 with the number $54288
Cell B39 with the number $166113
By simply viewing this one can see one of the Percentages should be around 33% and the other 66%. However, Excel gives it a Percentage of 25% and 75%.
How can I get the correct values?
I'm not sure where my syntax is wrong, and I can't think of what to google to learn more about the possible options I have when creating and declaring the value of variables.
I am simply trying to define the variable aWB as a workbook, whose name is found in cell B6 on the worksheet named "Start" in the workbook named "DW1". This seems to make sense to me, but I am not typing it correctly.
Code:
Dim aWB As Workbook
Set aWB = Workbooks("DW1.xlsm").Worksheets("Start").Cells("B6").Value
In cell K8 is the value (General) 800. In C8 is the value (Also general format) 768.
=IF(C8
I am stumped on a formula answer I am getting on a simple timesheet. The timesheet is set up with an In and Out column for each day and person for the entire month. A formula calculates their total hours worked on a daily basis, minus their lunch (30 minutes per day). So far, so good.
The trouble comes when I try to sum the hours worked for the entire month. I am getting an incorrect total. The example I am working I am summing E3:BN3, which show the employee working 15 days in a month, 12 net hours per day. 15x12=180 hours a month. My sum total is showing up as 300:00:00. It may help to know we use a 24 hour format. I have the results cell formatted as [h]:mm.
The following sub to create and name wsheets results naming the new sheet with the value of "A9" only, but what I want to name the new sheet is "A9" + "B9".
Sub CreateWorksheets()
Dim newSheet As Worksheet, itemSheet As Worksheet
Dim cell As Object
Dim itemrange As String
Set itemSheet = Sheets("BIDFORM")
Application.ScreenUpdating = False
itemrange = "A9:B9:" & itemSheet.Range("A9").End(xlDown).Address
For Each cell In itemSheet.Range(itemrange)
If SheetExists(cell.Value) = False Then
Sheets.Add Before:=Sheets("BACK SHEET"), _
Type:="C:PathFile"
Set newSheet = ActiveShee
newSheet.Name = cell.Value
End If
Next cell
Application.ScreenUpdating = True
End Sub
I have created a table in excel, and it has a very simple sum totals. When i include all cells in the table the total becomes 0. When I exclude a cell in the table, the total shows. I have deleted the row and re inserted another one and copied the cell content from above that was not having a problem,
View 9 Replies View RelatedI know that I cannot automatically assign UniqueCount the value of that formula. How would I format the line such that I can indeed assign UniqueCount the row value of that line?
View 9 Replies View RelatedIf I simply publish the pivot chart, the correct percent values are displayed on the y-axis. However, when I publish it with the interactivty option, the percent values are wrong. For example, the actual value is supposed to be 13.7% but graph shows 46496000.00%. The other oddity is that the table published in interactive mode has the correct values.
View 3 Replies View RelatedIn Excel 2007, when I delete a row/cell, text is associated with deleting row/cell but some lines, polygon ... can not associate with deleting row/cell . So the lines, polygon ... in mistake location.
View 12 Replies View Related