If a player does not qualify, their name and score should not be included in the final results.
I currently have their Name missing, but the NUMBER is showing up.
I've explained more in the attachment.
INDEXARRAY.xlsx
I have a problem with VLOOKUP function and I am looking for a workaround.
SheetA I have a column of business names and another column of the category.
SheetB has a list of credit card transactions and a column of categories - The results obtained from incorrect results from SheetA...
If I type in an age in A1, in A2 I want an age group to appear
the groups are
20-24
25-29
30-34
35-39
40-44
45-49
50-54
55-59
60-65
so far, if I type in an age then it normally enters the group ABOVE what I want
i.e. if I enter “24” then it put the group “25-29”. if I enter “42” it puts “45-49” and so on.
=LOOKUP($A1,{0,16,20,25,30,35,40,45,50,55,60},{"<16","20-24","25-29","30-34","35-39","40-44","45-49","50-54","55-59","60+"})
My goal is to sum up the total sales and total forecasted sales of each cost center. I compiled a formula that is supposed to do this just as I want it to. Simple enough. However, for some odd reason the formula returns either the totals of ALL cost centers or just a zero instead of the correct result. The weird part is that when I check the formula by pressing the "insert formula" button it suggests that the formula actually should produce the desired result.
View 5 Replies View RelatedI'm trying to do a simple conditional format where the date is highlighted in red if the difference between that date and Todays date is greater than 90 days.
I've done the formula as =(TODAY()>$B5)>90, which appears to work in the sheet and shows either True or False but when inputting that formula into the conditional format it highlights every single cells.
Are conditional formatting formulas different?
Using Excel 2007.
I setup a named formula: Spread1 =Sheet1!$E$2:$BE$2 where I entered % values to spread a an annualized figure over 53 weeks
On Sheet 2 I entered the amount to spread in $D$2 and in $E.. I entered my formula: =Spread1 * $D$2. Everything appeared great!
But then I deleted a few columns on sheet2 so first calculation is now in $G$2
Spread1: =Sheet1!$E$2:$BE$2
Calculations: Sheet2! $G2:$BG$2 (the values in I,J,k while summing to the total are in the incorrect weeks based on the spread on Sheet1, BF and BG have #VALUE! errors)
Seems odd, if I highlight "Spread1" in the formula bar and [F9] I see an array of 53 possible values and the 3 values I expect are in the place in the array (elements 5,6,7).
How I can defeat it with the possibility that a user may delete a column?
I am trying to sum up the total number of hours consumed on a particular activity within a specified period.
=SUMPRODUCT(($C38:$C176>=$B7)*($C38:$C176<=$C7)*($B38:$B176=$D5))
Unfortunately, the formula above gives me the total number of activity and NOT the total number of hours within a specified period. I attached the file I'm working on as reference.
I did a data table yesterday and it worked. I tried again today and the results are incorrect. They are coming out as a constant (the same result as the original formula). Has anyone had this happen before and figured out how to fix? My spreadsheet is fairly complex. Does the data table formula need to refer to the "base" cells? For example, if the formula refers to cell F15, but in F15 the formula is +C15, does my data table formula need to use C15?
View 3 Replies View RelatedIs there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
In the attached I have an index/match formula in B15 that I cant get to return any results not even a N/A#
Quick Quote Tool.xlsx‎
I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
I've spent the last week trying to do the following, with little to no success....and I'm running out of hair to pull out!!
I have a worksheet (let's call it DATA) with the following column headers:
* Site Name
* Year Initiated
* Status
plus a whole bunch of other columns of information.
On a separate worksheet (let's call it RESULTS) I'm trying to create a summary of all the Site Names where the Year Initiated = "2004" and the Status = "Active". There will be multiple occurences where this is true.
I then want to create further results where the year = 2005, 2006, etc., etc. I've been trying to use the INDEX function with variations of MATCH, SMALL, ROW, etc., etc., but so far, no luck.
Advanced Filtering is not an option as I need to do further manipulating of the results on the RESULTS worksheet.
I have a spreadsheet schedule that pulls quantities from another spreadsheet's cells. if the part number of the reference row matches the schedule cell's part number (row), and the date of the reference cell row is 2 workdays after that of the schedule cell's column, the quantity is put in the right place in the schedule. that part works. the problem I have is that sometimes there is more than one quantity with the same part number and date (due to the parts belonging to different jobs). when this is the case, only one of the quantities is picked up by the schedule. i want the schedule cells to sum the quantities of the reference file with matching criteria. i also don't want to have to change the reference file at all in order to do this. below is the function that works (besides summing the duplicates). the part after the " " is what i would need to alter.
HXS is the reference file where D is the part number column, I is the date column, and 5 is the index column referencing the quantity.
C is the part number column in the schedule
K is the date row in the schedule ....
how to return the top 5 results in a set of data.
In a nutshell, I have data that needs to be sorted but some intermediate to advanced (to me) excel formula needs to be used to sort the ranking properly. I've already used index, match and large but it does not suffice.
I've been trying to edit my index formula to only count an order number once even if the criteria for that result appear more than once. Attachment 324723
View 7 Replies View RelatedI have a table with Dynamic Headings and Expanding rows, that's setup like below: The formula in the Qty column would produce a "0", if the result of the Index Match has a blank. For example in a different table the reference cell would have "Heading3". Therefore the results in the Qty column would be like example below. The products in the table below are like 0's and 1's to trigger the formula to calculate with the variables, or give a zero. If the Index Match found "Heading2" the results would be based on cells under "Heading2 Column" etc.
x
y
z
[Code]...
Currently i am using index and match in excel but however i am unable to get the result tt I want.. what i need is
Data to check with item master whether all 3 (article, color code and size) matches and if it doesn't match, which of the field is wrong. (eg: wrong color code, wrong size or article don't exist).
[Code] .......
Above is my item master
Data to check
[Code] ........
Example case: 1
Checking first row of data check
Article number: 2-50660147
Color code: 6
Size: M
Result: "Wrong size"
But however, it returns as wrong size as it only reads the first time the article number appear in the item master and does not recognize the second time the article number appears with the correct color and size.
I am building somewhat of a rudimentary search engine that looks for a name, address or unique identifier, using an Index Match formula that searches with a wild card:
=INDEX(Name,MATCH("*"&F3&"*",Name,0))
"Name": is the defined name for column C on a separate sheet.
F3: is "search field"
The current formula (above), only returns the first match. The source data is only 927 lines so not overly large. I would like to have an additional page that will show the potential results from the wildcard search via a formula. Therefore needing results; 2, 3, 4, 5 etc. from the Index Match. I have searched high and low for solutions but I have found none in regards to retrieving multiple results from a wildcard search, only on a specific term.
I have spent hours doing this code to try to identify the value's row and column in a 2D array. However, it shows an error message "Unable to get the match property of the worksheet function class"
Public Sub MatrixMatch()
Dim V As Variant
Dim Value As Double, _
RowOrColumn As String
Dim m As Variant, n As Variant
Dim i As Integer, j As Integer
Dim Temp As Variant
Redim V(1 To 10, 1 To 5)
For i = 1 To 10
For j = 1 To 5
V(i, j) = Range("A39").Offset(i, j)
Next j
Next i
m = UBound(V, 1)
n = UBound(V, 2)
Value = 3.5.....................
I am trying a simple Index or Array formula and have been trying all day to get this work to no avail. The data is freight costs for shipping different size containers (20' and 40') to different ports (Lyndhurst, Port Coquitlam and Seattle).
I will have the port name plugged into one cell and the container size plugged into another cell and want to pull the corresponding freight cost out into another cell. The red text in the file are the data that I will plug in. The box below is where I would like the result.
I have 4000 rows of data with numbers in it (only one column...column C). These numbers are consecutive but these have breaks in between. So I am trying to find out where those breaks are and output those points in a list. So here is a macro that I came up with...but these array doesn't seem to write out results.... can anybody help please?
This macro tries to compare the two adjacent cells and if the difference between the values is greater than 1 then it copies that value in an array and writes that value in a cell in the same sheet.
Sub Macro1()
Dim temp(1, 1000) As Integer
i = 0
previouscell = 0
For Each cell In Range("C:C")
currentcell = cell.Value
abc = previouscell + 1
If currentcell <> abc Then
temp(1, i) = currentcell
i = i + 1
Range("D" & i).Value = temp(1, i)
End If
previouscell = cell.Value
Next cell
End Sub
I would like to use array v to store all the results of the for loop u...How can Ido it?
Dim myRange As Range
Dim AnsRange1 As Integer
Dim AnsRange As Range
Set myRange = Application.InputBox(Prompt:="Select row to insert 10 rows below", Type:=8)
AnsRange1 = myRange.Row
Dim u As Integer
Dim v As Integer
Dim var() As Single
v = 0
For u = 23 To 24022 Step 9
var(v) = u
Next u
If Not (AnsRange1 = v) Then
MsgBox AnsRange1
Else
Range(AnsRange1 & ":" & AnsRange1 + 9).Insert Shift:=xlDown
End If
End If
I know I can do this as I have already succeeded once but since moving a few things on my spread sheet the formula has gone wrong and I can't correct it.
I have one sheet with many different lines on and another I would like to select certain rows with the same reference number in column A. Below is the formula I am using
=IF(ISERROR(INDEX(Lines!$A$2:$J$200,SMALL(IF(Quote!$AL$4=Lines!$A$2:$A$200,ROW(Lines!$A$2:$A$200)-
MIN(ROW(Lines!$A$2:$A$200))+1,""),ROW(Lines!$A$2:$A$200)),COLUMN(C1))),"",
INDEX(Lines!$A$2:$J$200,SMALL(IF(Quote!$AL$4=Lines!$A$2:$A$200,ROW(Lines!$A$2:$A$200)-
MIN(ROW(Lines!$A$2:$A$200))+1,""),ROW(Lines!$A$2:$A$200)),COLUMN(C1)))
what my error is as it is returning the same value for me each time.
=INDEX('Data Dump'!$C:$C,MATCH('YTD Detailed'!B$2&A40,'Data Dump'!$G:$G&'Data Dump'!$D:$D,0))
I have to above array formula, i am looking to nest an offset within it. That looks up two columns to the right, but im having trouble.
Can an offset be added to an index?
I created an Index/Match array forumula in the worksheet. It works.
View 2 Replies View RelatedPlease see the attached worksheet for details. I would like the array function to search for instances of the word "FALSE" in column E and return the values of columns A:D when a match is found. I have done this successfully when the lookup value is a value in the first column of the range, but cannot seem to do so when the lookup value is in the last column of the range. I have received a #NUM! error each time.
View 9 Replies View RelatedI'm trying to create an index array that resizes its array starting location.
{=IFERROR(INDEX($V$17:$AU$17,1,MATCH(TRUE,V18:AU18
Imagine 5 periods of sales, growing by $550 per year, from $250 to $2,250. There is a columnar table with sales in increments of $500 to $2,000 paired with margin percentages.
Using INDEX(MarginColumn,MATCH(Sales,SalesColumn,1)) successfully retrieves the correct margin % for each period where Sales is that year's sales.
So, I tried to construct an array formula in the following way:
{=SalesRow*INDEX(MarginColumn,MATCH(Sales,SalesColumn,1))}
Sales is not changing, so that only the 1st year's margin percentage is being applied to each year's sales. I confirmed this by extending the array to a multi-cell layout.
How can I correct the formula so that the margin percentage is looked up as if it were using each year's sales independently? I know I can just SUM the array once this works, but this is my current road block.
P.S. If you see this answer immediately, how might I multiply the percentages by the sales that increase by $500 and sum the whole expression into one cell?
is it possible to declare an array or anyother datatype like the following in VBA?
Dim myArray() As Integer
myArray("A") = 0
myArray("Test") = 0
myArray("G") = 0
after checking some conditions i need to change the corresponding values too, like the following,
If mycondition = True Then
myArray("Test") = 1
End If
I have a table of data with years in row 1, week # in column C. The data array is from C2:O34.
I want to find the max value in each year column, then look up that result and return which week that value occured.
Is there a vlookup that allows you to specify which column of the array has the lookup value and which has the lookup result?