Do Until Loop ...

Jul 16, 2009

I have managed to successfully use a do until loop, however once finished, I would like it to move to the next row and do the same thing.

View 9 Replies


ADVERTISEMENT

Loop Within A Loop (repeat The Loop Values)

Mar 31, 2008

With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).

I have a named range called 'territories' that contains the list of X101 -> X152.

I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!

View 9 Replies View Related

Loop Through Multiple Files And Call Macros (but Unable To Loop)

May 14, 2014

Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.

Why it stops after one file when using "Application.Run..." to call the macros?

NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.

Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long

[Code]....

View 4 Replies View Related

Store Row Number Within Loop And Delete All Stored Rows After Loop?

Sep 11, 2013

I have working code that returns a row number within a for loop based on parameters I set.

Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.

Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*

Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.

All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.

View 4 Replies View Related

Loop Through Cells And Ranges Reverse Order With Backwards Loop

Aug 30, 2006

I am looping through each cell in a range and I would like to loop in reverse order.

Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next

I have tried:

For Each CELL In Range("C" & TotalRows, "C1")

and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.

View 7 Replies View Related

Copy Cells In Loop Based On Loop Increment Being Multiplied

Feb 7, 2008

I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,

View 3 Replies View Related

Loop Through Index Worksheets Using For Loop And Select Clause

Nov 4, 2013

I have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.

I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.

Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet

[code]....

View 2 Replies View Related

Avoid Changing A Loop Counter Within A Loop?

Oct 24, 2009

I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.

The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.

Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?

View 3 Replies View Related

Copying From One Loop To Paste Into Another Loop?

Aug 27, 2012

I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.

For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)

text
1
text
text

[Code]....

View 5 Replies View Related

For Each Loop To Delete Row W/ Value (Loop Backwards)

Aug 2, 2007

For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,

Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")

For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c

View 9 Replies View Related

Nested Loop. Inner Loop Not Running

Nov 30, 2006

i have a problem with a nested loop:

it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.

am i doing something wrong?

dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================

Sub new2()

Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant

r = 1 ..................

View 9 Replies View Related

Do...Loop Error :: Loop Without Do

Dec 17, 2008

Can't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".

View 14 Replies View Related

Loop Inside The Loop

Apr 28, 2009

I have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3

here is my main loop A1 = 5000
and second loop need to run inside the this loop

Sheet1.Activate
i = Range("A1")

For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b

View 9 Replies View Related

Endless Loop Within A Loop

Oct 28, 2006

I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.

I attach a file. the troubleshooting macroation is Sub Itiration.

The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.

Sub Itiration()
Dim CurCell As Object
Dim TempSum As Double
Dim d As Integer

For c = 3 To Cells(3, 4)
If Cells(11, c) > 0 Then
For i = 1 To Cells(10, c)
Do

View 9 Replies View Related

Slow Down Loop At Each Loop

Nov 18, 2006

Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.

I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.

View 6 Replies View Related

For Loop Goes Into An Infinite Loop

Apr 8, 2007

My code below goes into an infinite loop, with culprit line shown in bold and underline...

View 4 Replies View Related

Loop Gets Slower On Each Loop

Jul 20, 2007

I am parsing 15,000 files from a network server. The files are all the same format and length. The problem is that the first few iterations of my loop run fairly quickly, 7 to 9 seconds a case, but after only 300 iterations I'm up to 60 seconds a case. How do I keep the last iteration running as fast as the first iteration? I've included the main loop of my parsing routine below.

Sub Fill_Summary_Tabs() 'fills out the Datapack and JMP tabs
Application. ScreenUpdating = False 'turn off screen updating for speed

Call PrepImporterTab 'formats the Importer Tab so that everything runs smoothly < 1 second
Dim fs
Set fs = CreateObject("Scripting.FileSystemObject") 'part of the filename test

For N = StartingCase To EndingCase '***** Start of the Parsing Loop *****

Sheets("Setup"). Cells(20 + N, 1).Value = Time 'Print the start time of each case....................

View 7 Replies View Related

Do Loop Until Loop

Feb 13, 2007

This works to locate the first instance found:

View 11 Replies View Related

Loop Or For Each Within A For Each

Jan 22, 2010

I am having some technical difficulties trying to place data onto sheet2. Sheet2 starts out blank, as sheet1 is proccessed it pastes data to sheet2. I have tried a "For Each" that failed only pasting data into Range "A1" for every found instance.

In the code below, the area colored "Magenta", I need a Loop of some type that as data is pasted into column A on sheet2, it indexes to the next available cell and continues. How do I construct such a Loop or For Each with in the existing For Each?

View 5 Replies View Related

Add New Row In Loop

Feb 1, 2010

I now wonder is it possible to add Text in the row above and below the loop can this be done? Like below?

Image
Test 1 Test
Image/
Image
Test 2 Test
Image/

View 6 Replies View Related

For Each Loop

Sep 7, 2007

I don't get For Each loops. All I want to do is cycle through everywork sheet in the active workbook and lock certain cells. I've got the lock part working right but I have no idea how to effectively preform this on each sheet. From what I've read I think a For Each loop is the best way, but I can figure out how it works.

View 9 Replies View Related

Next OR Do....Loop

Oct 19, 2007

I have a spreadsheet that uses columns A:I. I want excel to be able to look at a row in the spreadsheet and where column I is empty it should delete cells I and H, then look at cell G and if it is empty, delete cells G and F, and then do exactly the same for columns E and C.

also, this spreadsheet is not always the same length, but always starts at row 15

View 9 Replies View Related

How To Use For Loop

May 6, 2008

I has a long rows of data, but I just want to read four rows of data each time,how can I code it using for loop?

View 9 Replies View Related

Loop Until

Oct 5, 2009

I think this is somewhere close but first time I've tried doing loops.....

Sub Thing()
'Loop for Top 10

Dim i As Long
Dim FaultCode As String
Dim LastRow As Long
Dim SecondGoRow As Long
i = 7

LastRow = Range("N7").End(xlDown).Cells.Row

For i = 7 To 16

FaultCode = Range("N" + CStr(i)).Text
FaultCode = Left(FaultCode, 1)

View 9 Replies View Related

For Each Next Loop

Jan 19, 2010

This is my first time using the "For Each Next" loop. I want to subtotal values in each sheet. Unless I make the worksheet active in the loop the code kept summing the same worksheet.

The question is do I have to activate the next sheet in the loop. Here is the code I have been using:

Sub SumCost()
Dim WS As Worksheet
Dim FinalRow As Integer
For Each WS In ActiveWorkbook.Worksheets
WS.Activate
FinalRow = Cells(Rows.Count, 11).End(xlUp).Row
Range("k" & FinalRow + 1).Formula = "=sum(k2:k" & FinalRow & ")"
Range("A" & FinalRow + 1).Value = "Total"
Next WS
End Sub

View 9 Replies View Related

Do Until... Loop

May 2, 2006

I don't know what I am doing wrong, but I know this should be verrrrry simple, and for some reason I just can't get it to work. I have the following

Sub HighlightRawData()
Do Until Selection = "x"
If Selection < 0 Then
EntireRow.Select
With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
Else: Selection. Offset(1, 0).Select
Exit Do
Selection.Offset(1, 0).Select
Loop

End Sub

This code is supposed to look at each cell in column A, and if it is not blank, it is supposed to highlight the entire row yellow and move down one row. If the cell is blank, I want it to just move down to the next row. The loop is supposed to run until it hits the "x" at the end of the range of cells.

View 3 Replies View Related

Loop Without Do

Aug 15, 2006

I was using Loop without trouble until I used If...Else inside the Do...Loop. The error I get is: Loop without Do.
Why is that?

Sub Macro3()
(doing something)
Do Until (statement)
(doing something)
If (statement) Then
(doing something)
Else
(doing something)
Loop
End Sub

View 2 Replies View Related

Loop Without Vba

Mar 20, 2007

if it was possible to make a loop without using VBA?

I have the following problem:
If the value of "J14" > 50; then I want to increase "J2" until "J14" < 50

Is this possible without VBA??

See attachment for details:

View 9 Replies View Related

Loop Between Textboxes?

Jul 31, 2013

So the think is that i have 197 textbox and i whant it to fill them with the range of a sheet preselected automatly with a loop.Whitout a loop i have this.

VB:
Dim e As Integere = CInt(TextBox198.Text)
TextBox1.Text = Sheets("Dia" + " " + CStr(e)).Range("A3").Value

that work, but its to slow, if i try this and also to modify

VB:
Dim e As Integer
For e = CInt(TextBox198.Text) To CInt(TextBox199.Text)
Dim i As Integer
For i = 1 To 17 [code]....


Where Textbox198.text define the start day (sheet), and Textbox199 the final day, this is highlighted.Also i dont know how to write the textbox(i).text loop, i try a lot of ways and always have problems.I tried to write like this that also didnt work out: TextBox & i & .text and TextBox+i.text

View 1 Replies View Related

Search Specified Row Without Loop

May 11, 2014

I need to look for specified row in column "G" order to copy information from another workbooks into that row.

E.g. search row contains name "David"

How to simplify this code without loop as I have 100 names to search and thus I will waste my time to create "Do, Loop Until" for 100 names.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved