I have a Drop-Down Menu that looks like:
BOS
PIT
COL
NYR
using List with source =Lists!$B$2:$B$9, which is just the validation list
My Table:
Team Player
BOS Bergeron
BOS Krejci
NYR Nash
... ...
My goal is to limit the end user from choosing BOS more than two times from the drop down menu
I have a data validation in a cell that works like this : if a control cell has the value "F" it validates the input with some dates in a custom list, if not it does nothing.
The formula looks like this :
=IF(F2="F",datelist,"")
It works fine but I also want it to display the drop down list when cell F2 = F, now all i can do is type a value and it checks if it's ok.
Can I do this without using vba ? I will send this to other persons and I don't want the macro warning to pop up when they open it.
I am trying to create a drop down menu in Excel to display certain values but it's not working. I want to input certain data in the cells. eg, 019, Quebec, Agent, Direct etc. I want to create a drop down list where if 019 is selected, all 019 entries would show up hiding all others. When nothing is selected all values would show up. I created a list but if I have 10 "Agent" entries in the cells, the drop down list also shows 10 "Agent entries rather than letting me select "Agent" and then displaying all agent entries below. I don't know if it makes sense but I basically want to make it easier for people to look for certain entries that they need rather than going through the entire spreadsheet to find all 019's.
View 2 Replies View RelatedI have a list of values (say a, b, c, d, e) and creating a drop down menu with these values in say A1. Say I chose 'c'. Now in cell A2 I want to be able to choose from the same list without being able to choose 'c' again. In cell A3 I want to be able to choose from the same list without being able to choose the values lalready chosen in A1 and A2. and so on.
View 2 Replies View RelatedIs there a way to have a data validation drop down menu but at the same time allowing users to enter free text as well.
View 3 Replies View RelatedUsing Excel 2010, I set up a simple workbook with a spreadsheet on one page and the ranges for data validation on another. I successfully linked the fields in the "Category" and "Tender" columns with the data on the second sheet, making nice drop down menus. Everything works fine on my computer. However, when we open the workbook on a different station, the drop down menus disappear. If you highlight any of the "Category" or "Tender" fields, the little drop down prompt is missing; they behave like regular, un-formatted fields. It appears that the data validation became un-linked.
We tried opening versions with certain fields locked (Mainly the Total, Breakdown, and Summary areas, but the fields with data validation were still editable), and also completely unlocked documents. Every time, the drop down lists were lost when opened on different stations.
I've attached the completely unlocked version : 00_FLEX TRAVEL EXPENSE REPORT_v3.xlsx‎
Forget to check a box or something? This seems way harder for me to figure out that it should be!
I've written a ton of VB macros that do various things to a raw data sheet. I want now to create a custom menu (in the the menu ribbon bar at the top of the screen). I'd like this menu to be used to activate the various macros for whoever has my add-in.
I've found several examples on how to create an add-in, and creating custom menus, however they all for when someone opens a workbook with the code, and then they remove the custom menu when the workbook is closed. I would like my custom menu to stay on the users ribbon bar no matter what workbook they have open. The only time the custom menu should not appear is if the user removes the add-in.
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
View 5 Replies View RelatedI have a list on one worksheet and I use a dropdown list from Data Validation to select the name required.
My list is so long that I would like to be able to type a letter or two to access to the name quicker instead of scrolling down.
I copied a formula that worked for someone else that put this formula in the data validation
(IF(I36<>"",OFFSET(Player,MATCH(I36&"*",Player,0)-1,,SUMPRODUCT((MID(Player,1,LEN(I36))=TEXT(I36,"0"))*1)),Player))
I do not wish to use VBA is possible.
I have a query with data validation.....
Can I have a cell rage.. say A2:E20...and every cell in it has a drop down data validation list, from data inputted into L2:L27 (For examples lets say L2 is A, L3 is B, L4 is C, L5 is D and so on).
if somewhere in the range A2:E20, say B6 I was to select D from the drop down list, I want the remainder of the cells in range A2:E20, to have the drop down list without the value D in it, and so on, so the more cells in the range I fill from the list, the list for empty cells gets smaller and smaller until there are none left.
i created a drop down list from data validation and it's a list of names. as i select from the list of names, i just want the initials of the names to be shown, not the entire name itself.
cnf_gif.gif
cnf.gif
based on this example, what i want is to select from the list of names and only the initials are shown!
i believe its something related to custom number formats...
I have a very detailed spreadsheet with drop down lists. I would like to block other cells if previous cells have certain selections. I have 7 columns of data that get inputted throughout the month. These cells have drop down selections that I have created. Is there any way to create a drop down menu AND another data validation? So If a selection is made, then the next cells will be blocked, using data validation "custom"?
View 2 Replies View RelatedIt is basically a simple sheet that lists the price (Column C) of different items (Column B) based on their Category (Column A).
I am trying to have an automated pricing sheet (on different sheet) utilizing data validation and drop down lists.
For example each row should have this, the drop down list in the first columns should list all the Categories available (This part works fine for me and i can take care of the duplicates).
Once that has been selected, i have now the option of selecting using drop down list also (in second column) the items corresponding to the Category selected in first column (Only the items that are part of that specific category should be listed in the drop down list).
Once the item has been selected, the price of that respective item should be listed automatically in the 3rd column.
I have giant excel spreadsheet that I am trying to clean up. I want to make one of the columns (with around 3000 rows and may of them are the same) into a drop down list. However, when I try doing so from the data validation tab, I get duplicates, triplicates, etc. of the same item.
View 1 Replies View RelatedI am in the process of creating a database, and have used 'Data Validation' to create drop down lists in order to obtain information quickly from the database.
I have encountered an issue where if I have a list the resembles the one shown below, the drop down list will show spaces.
This is particularly an issue for myself and my database because there is over 1,000 items in the list, and there are countless empty cells within the list. I have tried sorting the list, BUT because the database is quite large, sorting it will disrupt other functions of the database.
Ideally, I would like the drop down list to show only entries within the list that are not empty so the drop down list is entirely relevant, and more user friendly.
When it huge list of data for drop down list, it is too much time consume. If i type a letter, it will show all those quarry or data which start with that letter. It need not to scrolling huge list.Scrolling is barrier for use of data validation for me . I tried all dependable data validation.
View 1 Replies View RelatedI want to make some of my data validation dropdown lists narrower, so they end at the length of their longest list entry.
I know NOTHING about VB and although I found some "free code" online that claims to do just what I want to do above, I have no idea how to paste it in or where to paste it in, etc.
I have a validation drop down menu with the 12 months in it on Sheet 1. User picks the current month from the drop down list. I have 12 macros in the workbook, one for each month. Based on what month the user selects from the drop down, I would like to run a specific macro. The macro hides specific columns on sheet 2 of the workbook.
for example...user picks May from drop down which triggers macro MAY to run. If user picks Jun next month, macro JUN will run.
fyi...I'm using Excel 2010.
I'm using Microsoft Excel for Mac 2011. I'm creating a drop down box from List within Data Validation. It's only letting my create a list of 17 names. My longest list is 63 names. What do I need to do to create a list that will support that?
View 3 Replies View RelatedI have a table created that uses countifs formulas to pull data. I want the data to change based by client - so I created a drop down list with each client's name, and thought I could add a criteria to the countifs formula based on the client's name in the cell- but I get a value error.
View 9 Replies View RelatedI have the following function in cell (table 2 column C) where I want to find a contact name from my table TMI if 3 criteria are true (client, account, NAM) For each contact I have 1 true combination of client/account/NAM but for each client/account/Nam I can have several contacts.
{=OFFSET(TMI[[#Headers],[Contact]],MATCH(1,(TMI[Client]=$B$1)*(TMI[NAM]=C3)*(TMI[Account]=B3),0),,COUNTIFS(TMI[Client],$B$1,TMI[Account],B3,TMI[NAM],C3),1)}
The function is working well but shows only the first contact name if I have 3 contacts for the same client/account/NAM. (I pressed Ctrl+Shift+Enter)
When I press F9 on the function, it shows all the contact names! so they are somewhere.
Hence, I have copied and pasted this function into data validation / list in the source but it came up with an erreur.
Table TMI:
A B C DClient
Account
NAM
Contact
Comments
[Code]..
Table with offset function:
A B C D
Chi
Account
NAM
Contact name
Comments
[Code]..
All client, NAM and account lists are dynamic !
I'd like to create a drop down list in data validation from a column of data that contains numerous duplicates.
For example, let's say column A contained hundreds of transactions with either North, South, East and West, how could I create a drop down list in another cell that only had four selection options?
So, I need to figure out how to make the populated contents of a single dropdown box dependent upon the selected results in two other drop downs.
As there are ~35K lines in the sheet, creating Lists is impractical, and VBA is out due to client security settings.
My data sort order is: Region Name > Area # > Facility Name
I have a drop down to select the Region I want to work in.
The drop-down for Area # populates based on the selection from Region Name.
The hang-up is that the area numbers are 1-4 for each Region.
So, I can't simply populate another drop-down for Facility from the result from Area #, but it has to be based upon the results of both of the former results.
I'm trying to create a spreadsheet that has a data validation in it. I have a drop down list that has to options to select; Yes and no. Every time I create a new row to add more information I have to go through the process of creating a new data validation for for each cell in this coloumn.
Is there anyway of creating a way that every time I insert a new row, a data validation list box will appear in the coloumn that I want it in?
Sample Workbook: datavalhelp.xls
I would like to be able to make the same thing and select items for my drop down list, that are not blak and follow a specific condition. But I don't know how to include the condition in the array formula.
The condition I need is follow:
I want to have a dropdown list with Items that are not blank, and First N > Last N.
[URL]
It would be preferred to have formulas.
I have create a custom menu and want to add a choice and a subchoice that will guide the user to insert a number in an inputbox or under a list. Then the user's selected number it will be used as parameter for a vba code.
Eg.:
The choice is: How many rows will be marked
The subchoice : 10 (default value)
What i want is the following:
If the user choose the above subchoice then it has to be appeared an inputbox or something like that in which he has to insert a number, eg. 45. After that the choice must shows
The choice: How many rows will be marked
The subchoice: 45
This parameter must be active all the time that the user uses the workbook. At the end, if the user saves the workbook, the next time it will be opened, the subchoice must have the value 45.
Look at the attachment image to see exactly what i want
Here's the code. Just copy it under a module
Option Explicit
Dim cbMenu As CommandBarControl
Dim cbSubMenu As CommandBarControl
Public MenuSeries
Attached is example of what I'm trying to do. I want to use the drop-down on the "Master Tab" and have the corresponding price by promo_month appear in the yellow cells.
Currently its on July, but I would like to switch that to August etc and have new prices populate in the yellow cells. Prices come from the "table" tab.
Example 06.19.14.xlsx‎
Make a Data Validation dropdown list that also enters a range for cells, for example:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
Lounge ¦ Low ¦ Large ¦ Easy ¦ Blank ¦ 0 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 month
Bedroom ¦ Low ¦ Large 100 ¦ Easy ¦ Blank ¦ 1-3 ¦ Daily ¦ 1-3 ¦ Low ¦ >1 year
Bathroom ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 0 ¦ Weekly ¦ 1-6 ¦ Low ¦ <1 year
I can make a dropdown list for:
Kitchen
Lounge
Bedroom
Bathroom
But if I select "Kitchen" I would like it to enter the rest of the cells in that row:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
The total number of rows I use is 10, and the number of items in the dropdown list will be 30.
The data in the cells 2 to 10 does not change from that first set to its data menu name.
I've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
View 6 Replies View RelatedI am trying to do 2 things involving data validation. 1) Count the number of entries in a data validation dropdown list and display a result. 2) Use an If statement to pull the formatting from a cell into another cell.
An example would be if Cell A1="A", then show the drop down list associated with cell or sheet "!ryanB2". Alternatively, I would like to also display the number of entries in the drop down list.