Is there a way in which you can use two cells (a2 & b2 for example) with a button to trigger a macro which will search for a2 and replace with b2 over a certain range of cells? unless there is a function to do it of course, which i would prefer!!
View 5 RepliesI'd like to Find and replace blank cells in columns O and P, with the word "BLANK CELL" but only = to lowest data row in col D and then stop.
View 2 Replies View RelatedThis problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.
I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?
[Code] .....
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
View 3 Replies View RelatedI am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies View RelatedRange B3:B1000 is text strings. Column C2:C50 is a list of words that I would like to "Find" in Column B and replace with it's lowercase values unless they start off the string.
Example
Find all occurences of And or AND and replace with and
Find all occurences of With or WITH and replace with with.
Find all occurences of Or or OR and replace with or
I was wondering if it is possible to do this unique find and replace that is explained below.
I have many columns with data from our database. I have one column that has my html layout in it. I want to find within the html text data and replace it with data from another column for that row.
Example: We have [[manufacturer]] in the html area that we want to replace with data from our column called Manufacturer. So, it will replace the text in the html named [[Manufacturer]] with that rows Manufacturer data we have.
Is that possible to do?
I have around 10 names which I want to replace with their code names. For Example, "Alan Richard" needs to be replaced with AR001. Problem is I don't know cell range and this name might appear more than once in the data.
View 4 Replies View RelatedI am trying to find and replace #N/A from a formula (link to another sheet) with nothing in the cell, using VBA.
Using this code it will do the first "find"
Cells.Find(What:="#N/A", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
True, SearchFormat:=False).Activate
ActiveCell.ClearContents
Trying this
Cells.Replace What:="#N/A", Replacement:=" ", LookIn:=xlValues, LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=True, SearchFormat:=True, _
ReplaceFormat:=False
LookIn:= is highlighted and I get a "named argument not found"
Don't understand that because LookIn:=xlValues works in the first code.
I did try and place After:=ActiveCell,before this, but that does not work. I Get the same error.
I have more then one cell with the #N/A which I would like to get rid of. I want this to work only on this one sheet. The other sheet that the formula is pulling from does have #N/A, and that is okay, I need it there.
I have a list of sales associates that are assigned numbers. For example, John Doe is 1022. The data I have to work with only shows his number 1022 but for my reports management wants the name John Doe. I have about 60 sales associates and have a VB code that 'finds and replaces'. The code is huge. It has slowly grown out of hand, with more sales associates added daily. I also have 22 sheets in one workbook with specific columns to search for the numbers to replace with the names.
This is what I would like to do. Have a sheet named associates, as more associates are added I would just have to add their name and number. Have two columns with headers column A - Associates column B Associate #. Name ranges for the two columns and write a code that says look in the sheet associate, at named range 'numbertoname' and if the current sheet 'total sales' I am in has the number 1022 in column C replace it with the name John Doe. It seems like it should be easy but.......I have tried and tried today.
I am facing a strange problem with Find and Replace function of Excel. I converted a PDF document into a Word document. I copied the tables in the Word document to an Excel document. As the data had many ‘*’ characters, which I did not want, I used Find and Replace function to get rid of them. However, to my surprise, two things were happening.
1.When I tried to replace ‘*’ in a cell with ‘ Construction revenue ********************** ’, it was deleting all the contents of the cell.
2.When I tried to find all the cells with ‘*’ , it was selecting cells even without ‘*’
I tried various things like changing the format, pasting only values..etc, but nothing worked. Finally I had to use the Replace function of VBA to do the task. For further analysis I am attaching my Excel file with that data.
In the attached file I want to do a Find/Replace for 599 --> 599.0 and 428 --> 428.0. When I do a F/R for each it tells me it has made 3 and 5 replacements respectively but the data is not changed?
View 7 Replies View Relatedhow to find and replace to prefix and suffix string/text, see this below :
JACK MANHOLD ----------- JACK
SISCA JACK HOLAND ------- JACK
ANDREW JACK ------------- JACK
I'm doing a search simular to this
=VLOOKUP(D*,Sheet2!A*:B*,2,FALSE)
and I want it replaced with this
=VLOOKUP(D3,Sheet2!A1:B42,2,FALSE)
HOWEVER when I do the find & replace I don't want it to change whatever the current value is to D3 I want it to stay as whatever it was already....so how do I exempt the "D" value from the search?
I'm using Excel 2007 and trying to replace about 2000 commas with full stops. I want to use find and replace but keep getting a message saying that Excel cannot find the data I'm searching for.
Excel help suggests I haven't clicked on "find" before clicking "replace" but I did.
I've tried highlighting the column in which I want to make the replacements, but same message.
Also tried highlighting nothing, same message.
Tried copying and pasting the whole thing into a new file, but same message.
Assume someone typed the hereunder date ad TEXT.
The Formula bar shows: ="01/01/2009"
The cell presents: 01/01/2009
I need to remove the equation sign as well the two inverted-commas.
I am familiar with the "Text to Column" feature, the use of SUBSTITUTE Function, a short macro and also the Find&Replace is also a good idea but, as far as I understand,
it must be run Twice(!)
I am looking for a way to use Find&Replace in "One! shot" - meaning, to put the TWO different(!) characters [ the '=' and the " ] in the 'find what' window,
leaving the 'replace with' window empty.
I know that something similar to that can be done in a "Word" document - but can it be accomplished in Excel?
I have two groups of numbers. The first group is x amount of rows and each row has 6 numbers. The second group is x amount of rows and each row is 7 numbers.
Each number from the first group needs to check to see if it exists in the second group. If it does exist, the cell should change to a highlighted cell, or switch to an 'X' or something else that identifies it has been matched. Note: Numbers may be duplicated in both groups. Is there an easy way to do this, or will it involve programming? I'm attaching an example of the "group" setup.
I have various formulas (such as: =(D3-$E$3)/$E$3 )
which continues for each row (IE next row 3 is replaced with 4 etc)
I have made som errors when I made the formulas and therefore I have the following questions:
1. Is it possible to find and replace all E's with another letter (F in my case). I haven't been able to resolve this, when it has to be done inside formulas?
The optimal would be if I could set 'Display formulas' under tools, and find and replace in the formulas displayed.
2. Is there a smart way of swapping D3 with E3 for all formulas? (So the result will be: =($E$3-D3)/$E$3 and etc for all formulas)
how to do a find and replace on the following
090226000/Jones/123 Main Street
All data has numerical 9 places first field
I need to eliminate the /Jones/123 Main Street
so that I just have 090226000
I thought * would work but it's not returning the
correct output
How does one use the find and replace function in Excel to replace an asterisk? "*"
View 2 Replies View RelatedI need to do a find and replace on cell E13 on every worksheet in the workbook - a several hundred pages. The sheets are individually named not Sheet1, Sheet2......
First of all I need to find say "oldchippy" (without quotes) in cell E13 and if its there replace it with "oldchippy2", if its not there leave the contents as it is.
I have a workbook (materials forecasting) that automatically pulls from another workbook (production schedule).
The materials forecasting workbooks are named in regards to the current Monday (ie 02-02-09.xls, 02-09-09.xls, etc). The production schedules are named in accordance with the financial periods and weeks, ie PD1WK1.xls, PD1WK2.xls, PD1WK3.xls, PD1WK4.xls, PD2WK1.xls, etc
The materials forecasting sheet looks two weeks out.
EXAMPLE (pretend that today is the first day of PD1WK1)
Cell C1 will reference PD1WK1.xls
Cell C2 will reference PD1WK2.xls
Each week I copy the old materials forecasting sheet and rename it to the current week (ie I take 02-02-09.xls and rename it to 02-09-09.xls). I have a bunch of macros set up to move my deliveries up a week and what not. One macro I would like to set up, however, is that by putting a value in a cell the find and replace macro will work.
EXAMPLE
Cell A1 will reference PD1WK2.xls
Cell A2 will reference PD1WK3.xls
Cell C1 will reference PD1WK1.xls
Cell C2 will reference PD1WK2.xls
Then I would have the macro find all instances of whatever value is in cell C2 and replace it with whatever value is in cell A2. Then likewise fore C1 and A1 respectively. (If you think about what I am doing here... all I am doing is moving the schedule up one week so that I am forecasting using the right schedule).
I can manually do this but I would prefer a macro based on a simple user input for when people fill in for me.
I've got a piece of code I'm stuck on. Basically, I have a range of data and most cells are empty. However, I want to replace all the nonblank cells with an X. I can't quite figure out how to have the code replace something non-specific...
View 3 Replies View RelatedI am attaching a sample excel workbook for reference. I have a set of coded data in numbers in ColumnA, and want to replace them with actual names which are in Column G.
As explained before, I set up columns such that all template number codes are in Column F and names in Column G. The actual raw data in Column A.
However the macro is giving me wrong replacements i.e. if the coded number was 21, its replacement is name2name1 not name 21, I hope you understand what I am saying.
It will save me bucket loads of time as I have a multiple similar columns. I am a novice in macros so I am not sure how to find full numbers (21) and replace with the specific name.
Sub FindReplace()
Dim Frange As Range
Dim Fr As Range
Set Frange = Range("F1", Range("F65536").End(xlUp))
For Each Fr In Frange
Columns("A:A").Replace What:=Fr, Replacement:=Fr.Offset(0, 1), LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Next Fr
End Sub
I am trying to correct a problem in a database where some of the formulas contain an error. It's a simple enough fix -
View 4 Replies View RelatedI need to recode 30+ files the have the old account numbers and I need to replace them with new codes ie
Old New
123456 10_1240
256789 12_1130
789123 15_1122
I have an excel spreadsheet which contains some 800 accounts in the format above showing old account number in column A and the new account number in column B. How would I write the VBA code to search all files in a specified folder search all rows in column E and find/replace using my spreadsheet containing the mapping details as above?
or in the very least just be able to run a macro to replace all the old codes in an individual spreadsheet.
I have attached my spreadsheet. What I am trying to do is to be able to search for data on the Data worksheet (to get to the user form I click the modify referral on the out worksheet). The code I have so far works but when I search for records that have duplicate "cmm" values it only fills in the first 10 fields on the form with the appropriate info. For example in the attached file if you click on the CMM text box and type in 6262 then find it comes up with 2 instances of 6262. but when you click on each individual record in the list box only the 1st 10 textboxes change with the appropriate info.
View 12 Replies View RelatedI have a list of codes which I want to swap into more meaningful names. For instance, say
A32
G43
R54
I want to do a find replace to turn these into
Potatoes
Carrots
Onions
Is it possible to have these written into a single piece of code ? Or, do I need to have separate pieces of code for each Find/Replace ?