In this file Vehicle Fuel Tracking.xlsm I have a pivot table set up to filter my data. Next to the pivot table I have a column that Totals the Mileage based on the MAX and MIN of each group. I am looking for a dynamic formula to keep the totals alligned if data is added or deleted from the pivot table.
I would also be open to changing the data table to accomodate this request if needed.
I've got two pivot table reports working off one dataset.
I've named the range Recharge with the formula as below..
=OFFSET('Recharge'!$A$1,0,0,COUNTA('ABC Recharge'!$A:$A),16)
But this uses column A as the longest column... but sometimes it will be column I - how can the formula be adapted ? or can it be ? i've been looking at the Max function and trying to incorporate that but my limited brainpower has gone to mush.
I am using pivot tables/charts for drilldown reporting. After running a complex macro to consolidate multiple reports into one range, I need to generate pivot tables and charts.
These reports will change month to month in the number of entries they have (template will be identical), and therefore my data source range for the pivot table is bound to change. Therefore my question is, how to develop a macro that will dynamically change the source data range to the amount of rows?
The "Sum" sheet can change its number of rows. The pivot table is based on it. I'm having trouble with the SourceData portion of the code in my macro ....
View 9 Replies View RelatedI'm using a table with dynamic data to populate a column/line chart.
The data is based on monthly targets achieved and forecasted. With each month, the information will update. The graph needs to have only the current month and future months to be displayed and I don't want to include the previous months information in the chart. The information in the chart automatically updates and loses the previous month's data. Unfortunately, the graph plots the blank data and has a blank entry on the graph. This means that the information I need starts in the middle of the chart and has a line that shoots up from 0 to the current month's value.
Is there any way that I can omit the month altogether?
The data source I am using is below:
MonthTarget for month* (examples)
October 100,123,669
November 125,154,586
December 150,185,503
January 175,216,420
February 200,247,337
March 225,278,254
April 250,309,171
May 275,340,089
June 300,371,006
As you can see, July August and September are not included. I want to be able to start the graph from October in the above example. In the following month, I want to use the same data but October Figures will not be required. How can I achieve this?
I have a two way data table for which the two variables are changed frequently. In the data table, for ease of reference, i usually highlight the corresponding row and column of the two most current variables the intersection of which gives you the current output. But these highlights need to eb changed each time the variables are changed 9the table is copied onto another document for presentation hence the need to keep changing the highlights).
I was thinking of configuring the highlighting process to happen dynamically, i.e. the row and column highlights change dynamically when the variables are changed.
I have some data a pivot table I would like them to be concatenated on next column. The X signifies the Blank cell on the pivot table. Now I can concatenate (in 1 cell) using VBA but I don't know how loop thru the Blank cells. I have about 1000 rows of data. I would like Data like this:
Investment Price Source
009451AP0 FTID FTID 009451AP0 Total x
967673Z RWP RWP 967673Z Total x
AA.CDS23 MarkIt Markit AA.CDS23 Total x
AACE.BD10BA FTID FTID, RWP RWP
AACE.BD10BA Total x
[Code] .........
I have added some new data into an exisitng column
WHen I try to create a new pivot table those new data names do not appear but the total of records is correct and the reange is accurate
IT is just not showing in distributed between the new names in that field
I have a pivot table with two columns: Code and Quantity. I want to loop through the Quantity column and hide all values = 0. I can do this easily by incorporating this into my code:
Code:
pt.PivotFields("Code").PivotFilters.Add _
Type:=xlValueDoesNotEqual, DataField:=pt.PivotFields("Sum of Quantity"), Value1:=0
However, I have a "(blank)" code in all pivot tables. I do this because occasionally there is no data to organize in a pivot table. Having a "(blank)" option will allow my code to work even when there's no data. Therefore, I want to keep blank visible at all times. The above code hides "(blank)", however.
The below code is what I've tried with no success.
Code:
Set pf = pt.PivotFields("code")
For Each pi In pf.PivotItems
If pi.PivotFields("Sum of Quantity").Value = 0 Then
[Code] ........
I have a spreadsheet the includes data validation, auto fill fields using formulas and conditional formatting all over the place. The user will be adding rows of data whenever applicable, so I want to create a dynamic pivot table that will update automatically. I think I've done it properly, Insert - Name - Define. In the Refers To field, I've added:-
=OFFSET(Sheet1!$A$10,0,0,COUNTA(Sheet1!$A:$A),12)
I've then based the Pivot Table on the defined name. For some reason, when I add a new row of data, the pivot table doesn't update, I have to do it manually. When I go back into Sheet1 and click in the Refers To field, there is an extra "blank" row showing as included in the data range (screen print attached) Is my OFFSET wrong, or does it have anything to do with the fact each row (down to line 300) contains formulas and #N/A's?
I have a pivot table, and I would like to be able to have a formula or vba to extract the data to separate sheets. The pivot table looks similar to;
Row Labels
Count of FileSemester
John Smith
8
[Code].....
The pivot table consists of employee name (John Smith), followed by class code and qty. I have a separate spreadsheet for each employee and what I need to be able to do is to extract the class & qty into these spreadsheets.
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I have a list of S/N with Pass/Fail result next to it. A specific S/N can appear several times in the list:
SN...Result
-------------
111...FAIL
111...FAIL
111...FAIL
111...PASS
222...PASS
333...FAIL
333...FAIL
When creating a pivot table of SN vs. Result (count) I get:
****|FAIL...PASS
-------------------
111..|...3.....1
222..|..........1
333..|...2
I want to get the FAIL count of SN in which PASS > 0 (First two rows)
BUT I can not figure out how I can filter based on the values of the pivot table itself (rather than the values of the original list). When I try to use 'Result' field as report filter, I can not get it as a Column label (and vice-versa). In this case I get:
I get:
****|PASS
------------
111 | ...1
222 | ...1
Desired:
.......|..FAIL..PASS
-------------------
111 |...3...1
222 |........1
Desired (alternative):
......|..FAIL
-------------
111 |...3
222 |...0
I have a table with outstanding days for Funds owed by multiple accounts which dynamically changes everyday I am looking to group this table by >5days, 6 to 14 days , 16 to 40 days ,>40 to 90days and >90days consistently even though the table will change dynamically every day..
View 4 Replies View RelatedI am trying to make a dynamic pivot table using VBA. Unfortunately, Im not very good.I have a set of data with variable number of rows and variable number of columns and I need to make a pivot table. Need to select this data from sheet - Master, where the first data entry starts in cell A1. of the data in the sheet, i only need the name and age title In the pivot table fields -
ROWS needs to contain - name
COLUMN needs to contain - Age
Values need to contain - count of Age
After this is done, since the data will be dynamic, the pivot table will also be dynamic. i need to copy the pivot table data and paste it in another sheet so that I can do some filtering. The filtering part I think i can do my self.
I've a macro that generates a pivot table from another excel workbook, however i need the range to be dynamic as the excel workbook im generating the pivot table from changes in number of rows on a weekly basis. Here is the existing coding:
Code:
Sheets("QA").Select
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"QA!R1C1:R22580C12", Version:=xlPivotTableVersion10). _
CreatePivotTable TableDestination:="Pivot!R3C1", TableName:="PivotTable2" _
, DefaultVersion:=xlPivotTableVersion10
how to make the SourceData dynamic
I have a sheet in my workbook called Results. This sheet contains a list of a fixed set of columns (A - N) but with a variable number of rows.
I am trying to create a macro to create a pivot table from this data, which automatically selects all the rows in the Results sheet to form the data set.
I've had a look at some of the other threads on this topic, but just can't get this working.
I have the following code that I have pieced together from other threads - you will see I am trying to set "PivotRange" as the data set and include this as the data source in the pivot. I get a subcript out of range error when I run this.
Dim PivotRange As Range
PivotRange = Range(Worksheets(Results).Cells(1, 1), Cells(lastRow, lastColumn))
Sheets.Add
[Code].....
Because my pivot table is used by several users the data source changes often. In response, I created and applied a dynamic range using the offset formula. While the pivot talbe grabs the correct # of records, it inserts a blank column and row. There are NOT any blank cells in the data source range, as reflected by pivot table counts for the Blank column and Row. Any idea why Blank is showing up in my pivot table and how I can correct while maintaining the dynamic range?
View 9 Replies View RelatedI wish to create a Pivot Table. It is based on source data with fixed columns (A to W) and dynamic rows. The following is my
Dim WS As Worksheet
Dim DataRange As Range
Set WS = ThisWorkbook.Worksheets("sheet1")
DataRange = Range("A1:W1", Selection.End(xlDown)).Select
ThisWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:=WS.Range(DataRange)).CreatePivotTable _
tabledestination:=Sheets("sheet2").Range("A1"), tablename:="PivotTable1", defaultversion:=xlPivotTableVersion10
Dim PT As PivotTable
Set PT = ThisWorkbook.Worksheets("Sheet1").PivotTables("PivotTable1")
PT.PivotFields("Type of Work").Orientation = xlPageField
PT.PivotFields("Profit Center").Orientation = xlRowField
PT.PivotFields("B/(W) CTD Net Rev").Orientation = xlDataField
Because I'm going to use it in my work, it must be reusable. And every time I use it, the numbers of row are different. Therefore, I made the source data into a dynamic range. The range changes when rows change. However, problem always appears in the following line:....................
Im trying for the first time to use a dynamic range as the 'source' for a pivot table. The pivot table and the source data are in two different tabs. The source data is on tab Log! and i have used Daves formula (i hope correctly) to define the dynamic range. The range starts at Column B and is 22 columns wide:
Refers to:=OFFSET(Log!$B$1,0,0,MATCH(""*"",Log!$B:$B,-1),22)
I have named this dynamic range DMR. I have a pivot table on another tab. When i try to use DMR as the source (Log!DMR), it gives me an error "Reference is Not Valid". I must have the syntax wrong somewhere.
I can’t seem to work out the formula for calculating a ratio using the data in the pivot table.
I’ve added a column next to the pivot table to work out the ratio between to columns.
=SUM(B11/C11)
But what if there is no data in cell (B11), I want to return a “ “ (blank space)… but it returns a #DIV/0!
I am new to Pivot Tables and I am having difficulty displaying a count of data in a column with Y/N answers.
Previously I would have undertaken this using the SumProduct function in a standard table.
I attach an example workbook with my data, what I want it to look like and the pivot I have created.
Book1.xlsx‎
I have a pivot table without report filter and I set insert page break after one of my selected row labels.
I also would like when I print, these row Labels become the title of these pages at the same time.
Actual File : Untitled.png
However I would like when I click on print or save as pdf will print all pages as one file and each Center that I have set page break for, in separate page and add that specific center as its title:
Attachments for more details:
test_Page_1.jpg
test_Page_2.jpg
test_Page_3.jpg
test_Page_4.jpg
I am having issues with a VBA script. The Spreadsheet is linked to a SQL DB and updated with data from scripts that are executing throughout the day. This is then fed to a dashboard. We have a Baseline that shows in the Date column as 0/0 and 1/1. I need a way to ensure that the 1/1 is always in the last row of the chart so the baseline shows across the entire range of dates. The current method is to declare a variable and add 1 to it whenever we iterate through the sort for the other dates. However everyday the 1/1 baseline column ends up further to the beginning until it is next to the 0/0 in position 2.
So I am trying to find a way to have the macros find the last row of the Date field and then set the position to be equal to the last row.
On a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedHow do I create a Named Range that is dynamic (I think using the OFFSET function) that automatically expands and contracts as the rows and columns of my data changes?
Next step, I then want to use that Named Range as the source of the data for a PivotTable.
Yes, I know starting in Excel 2007 you can use Tables and don't need to create a dynamic named range. That is not an option at this time.
A simple example of the problem: Imagine a pivot table has two pagefields at the top. The first list the gender ("boy" or "girl"). The second one below it lists people's names. How can it be programmed so that when the first (gender) filter is selected to "boy", pagefield 2 (the names) will only display the names of boys. So I would like the pagefield to work like regular multiple filters would. (And not list every possible item for all)
View 2 Replies View RelatedI am trying to create a pivot table on a new sheet names as 4x4
I am getting following error:
Error : 1004
Reference Not Valid
I am not sure where is the problem. I have generated this code by using macro recorder and just changed the source and destination of the pivot generation code.
I have a problem as I need to present data with different data sources. I'd like the calculations to be as "automatic" as possible. The data consists of countries and regions and their sales pipe. The pivot table doesn't give me all the data that I need to present so I need to add extra columns with calculations and data from other data sources.
The problem I meet is that the 'total row' within each group needs to be reflected in my columns as well (F:G) It works as long as the data I've imported has the same amount of States within each group of Contry but if the number of states differs with the newly imported data - my "manual" columns are wrong.
(A;B;C;D;E;F;G;H)
Country;State; Red; Amber; Green; Quota; Total PV; Coverage;
I've created a Pivot table on the first 5 columns [Country; ...; Risk] (A:E)
The following columns are manually entered based on the pivot (F:H)
Quota (data source from another sheet)
Total PV (a sum of Red; Amber; Green in the Pivot)
Coverage (returns % of TotalPV/Quota)
For each group Quota and Total PV needs to summarize the above data within the group. I've 'hard coded it' today (SUM(F3:F5)) - F3:F5 can as well be F3:F8 or F3:F4 depending on the imported data. I have 8 different Countries (groups) with different amounts of States and 3 different sheets for each Region of countries so I need this summary to be automatic based on what group (Country) it belongs to. How can I make the calculation different so that it's dynamic as well as the Pivot table? Today it's not dynamic and it needs my 'hands on'.
Quota =IF(ISNUMBER(SEARCH("total";A6)); SUM(F3:F5); IF(ISNA(VLOOKUP(B6;Quota!B:F;3; FALSE));" ";
IF(VLOOKUP(B6;Quota!B:F;3; FALSE)=0; " ";(VLOOKUP(B6;Quota!B:F;3; FALSE))))).