I want to get the FAIL count of SN in which PASS > 0 (First two rows)
BUT I can not figure out how I can filter based on the values of the pivot table itself (rather than the values of the original list). When I try to use 'Result' field as report filter, I can not get it as a Column label (and vice-versa). In this case I get:
111 | ...1
222 | ...1
On a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click() Sheets("Details").Select Dim pt As PivotTable Dim Employee As String Dim SDate As String Dim EDate As String
I've a table of historical members status list. with this table, I could track each member status history, since the beginning they become a member.
Here is the short of table
Name Member Status Date
Adel New Member 1-Jan-14
I expect to use Pivot table to show how many people which are still "New Member" and/or "Junior Member" up to now. From the table above, there should be: only one person who still as New Member. because it is only Smith, and only two people with Junior Member. they are Adel and Jhon.
I've search around and found the following useful link, viewing only the last date in a pivot table for each user also A quick way to return the latest date in a subset in Excel
How to know the last status of each user (each member in my case).
Instead of Excel creating a new sheet when I double click on the results of a pivot table, is it possible to just filter the results of the original source data's sheet?
Here is my situation, I have source data that needs to be updated after someone double clicks on the pivot table data. They won't be able to update the source data if it just creates a new sheet (since it's a copy).
I am looking at a way to create a dsitributable excel spreadsheet (.xlsx), which contains non-sensitive, yet restrictied organisational information segmented by regional department for NCSA, EMEA for APAC respectively.
By design, all data has been collected in a datatable on a password protected "data" sheet - and - presented on an "executive summary" sheet. T
The "executive summary" sheet contains a privottable with select "multiple options" to allow for aggregated dataviews on executive level. However, on a regional department level, the users must only see their own regions, hence the filtering mechanims on the pivottable should be restricted.
Currently, the restrictions on the pivot tables are made in VBA, using the following script. However, it still allows people to change the "multiple options" filter in the pivot. How can I restrcit this option
Sub RestrictPivotTable() Dim pf As PivotField With ActiveSheet.PivotTables(1) .EnableWizard = False .EnableDrilldown = True .EnableFieldList = True .EnableFieldDialog = False .PivotCache.EnableRefresh = False For Each pf In .PageFields
As a sidenote; the above design requires that a spreadsheet is compiled for each region each month. Ideally, the ability of filtering, could be password restricted - or - filteren. So only one selection would be presented for the NCSA, EMEA and APAC respectively, while Executives could view across one-or-many regions? However, as Pivot tables are used by design, I cannot see how this could efficiently be achieved?
I want for my set of data. The attached .xls is pretty straight forward: the first column is a list of people (identified by their customer number) and the second column is the URL they visited.
Since many people went to multiple pages, there are dupes between the two columns, but all of the rows are unique. What i am looking for is a table that shows as a header the URL (just one) and then the list of people that went to that URL under the header. So it's really just one column of information. It seems like a perfect task for a pivot table.
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
I have some data a pivot table I would like them to be concatenated on next column. The X signifies the Blank cell on the pivot table. Now I can concatenate (in 1 cell) using VBA but I don't know how loop thru the Blank cells. I have about 1000 rows of data. I would like Data like this:
Investment Price Source 009451AP0 FTID FTID 009451AP0 Total x 967673Z RWP RWP 967673Z Total x AA.CDS23 MarkIt Markit AA.CDS23 Total x AACE.BD10BA FTID FTID, RWP RWP AACE.BD10BA Total x
I have a pivot table with two columns: Code and Quantity. I want to loop through the Quantity column and hide all values = 0. I can do this easily by incorporating this into my code:
Code: pt.PivotFields("Code").PivotFilters.Add _ Type:=xlValueDoesNotEqual, DataField:=pt.PivotFields("Sum of Quantity"), Value1:=0
However, I have a "(blank)" code in all pivot tables. I do this because occasionally there is no data to organize in a pivot table. Having a "(blank)" option will allow my code to work even when there's no data. Therefore, I want to keep blank visible at all times. The above code hides "(blank)", however.
The below code is what I've tried with no success.
Code: Set pf = pt.PivotFields("code") For Each pi In pf.PivotItems If pi.PivotFields("Sum of Quantity").Value = 0 Then
I'm trying to have a command button clear all filters on a pivot table (PivotTable1) and apply a new filter equal to a cell value (C4). If the cell value can't be found I want the filter to equal "No Meeting". I'm trying to recycle the code from another workbook I built a long time ago, I just can't get it to convert to this application.
Code: Dim County As IntegerDim pvtTable As PivotTable Dim pvtField As PivotField Dim pvtItem As PivotItem
- a list of data - a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I have a huge excel file. This file contains Projects, Project Manager, departments and sales for different quarters. Each department has sales and the quarter the sale was done. Now I want to create a pivot table where I can see the sales for each quarter for each project or each project manager. Attached file may elaborate the problem. ShaA1.xlsx
I've created a PivotTable using VBA that contains hundreds of PivotItems, which would look bad when a PivotChart is made.
I'd like to set the PivotTable to make visible only the first X items (let's say 10). How would I do this in VBA?The macro recorder gives me the name of the PivotItem, but this varies so I'd like to use an index:
I want my report title is more dynamic which is based on the pivot table's <Status Date> filter. It mean if I select the <Status Date> filter option as 6-23-2014. Then the report title will automatic update as "Statistic Report 6-23-2014" instead of I have to change the date each time I run the report.
I have this code for setting a filter on my pivot table to show all data occuring after a certain date. Is there a way to add code so that instead of it saying "Value1:="31/10/2011"" that it would work out the last day of the current month and use that.
I need to filter a pivot table based on a field property. Sort of strange, but the database I get the PivotTable data from returns the Week in the accounting month. as the field name. It has several properties which I have figured out how to expose including the period end date. Now I need to figure out how to filter the PT based on that.
The following shows the property:
Code: ActiveSheet.PivotTables("PivotTable4").CubeFields("[Time]").AddMemberPropertyField Property:="[Time].[Week in Month].[End Date]
Now if I just knew how to filter with that value I could move on the the next issue ....
I have a summary worksheet, which has a drop down cell. on another tab I have a few pivot tables, is there a way I could get one of the pivot tables to auto filter based on the selection in the summary worksheet?
How to use an array of multiple values in code I want to use the array of values "jan" "feb" "mar" in the code instead of "jan"
Code: Private Sub Worksheet_Activate() ActiveSheet.PivotTables("Pivottable1").PivotCache.Refresh ActiveSheet.PivotTables("Pivottable1").PivotFields("cat").ClearAllFilters ActiveSheet.PivotTables("Pivottable1").PivotFields("cat").PivotFilters.Add _ Type:=xlCaptionDoesNotEqual, Value1:="jan" End Sub
In this file Vehicle Fuel Tracking.xlsm I have a pivot table set up to filter my data. Next to the pivot table I have a column that Totals the Mileage based on the MAX and MIN of each group. I am looking for a dynamic formula to keep the totals alligned if data is added or deleted from the pivot table.
I would also be open to changing the data table to accomodate this request if needed.
I have two fields where users enter a security identifier (cell P1) and the declaration date (cell P2) and i'd like to be able to pull all the records from the master table (A1:K10) where the security id matches (column H) and the request date (column C) is <= the declaration date (i've attached a sample file for your reference). I tried using a pivot table but it doesn't let me filter for "less than or equal to" values for the request date.
I have a macro to refresh all pivottables in my workbook. Each pivottable source from the same data pool - in addition I have a filter on each pivottable. Is there a way to fix this filter, such that once the source data is updated, the filter doesn't change? Or to only refresh the "data" in the pivottable?
My code for refreshing all pivottables is given below.
Dim pvt As PivotTable Dim sh As Worksheet Application.Calculation = xlManual For Each sh In Worksheets For Each pvt In sh.PivotTables pvt.RefreshTable Next pvt Next sh Calculate Application.Calculation = xlAutomatic