I have a worksheet that keeps a year to date and month to date total of overages or underages (end of day cash reconciliation). I need to have a formula that clears the month or year to date total cell at the appropriate time and I want to do this independant of the year as I generate a new sheet every day and enter yesterday's numbers.
I think I have the year figured out by picking the month and day and comparing but the only thing I have come up with for the month is comparing to a list of 13 dates (leap year).
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then MsgBox ("You may not enter Data before the current Month") Else '...... Run main code here
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
I have a worksheet called "zz_Exchange" that contains the exchange rate for my company for each month of the financial year. I am using this info in a summary page that uses the data for multiple calculations in the workbook.As we pass each month I would like to move the focus of a cell in the summary sheet to the relevant month in "zz_Exchange"
The column names are "currency_code" (USA Euro etc), "currency_year" (09, 10) "period" (1-12) "exchange_rate" (this is where the data is held)
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
... in A1 a year (say 2012) ... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
Please refer to attached Sinking Fund worksheet. have managed to solve most of it. Just need to figure out how to match the periods out. My requirements are on the worksheet. 1. To get the schedule on sheet 1 to stop calculating further once it has reached the actual number of payment periods as shown in H12. 2. To get the interest calculation in sheet2 to stop once the actual number of payment periods as shown in sheet1 H12 is reached.
=> and for my ms excel has its columns (year,month,date) in this if i input the date that is base in the database range from StartDate TO its EndDate will automatically put the month and year which base also in my database (year,MonthNum)
HERE:
A1 B1 C1 Year Month Date A2=2014 B2=January C2=01/01/2014
I use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
As To Why This Is Giving The Answer Of "January Of 2009"? For All Answers. Sheet7
RS92/27/2009January Of 2009102/28/2009January Of 2009113/1/2009January Of 2009123/2/2009January Of 2009133/3/2009January Of 2009143/4/2009January Of 2009 Spreadsheet FormulasCellFormulaS10=TEXT(MONTH(R10),"MMMM")&" Of "&YEAR(R10)S11=TEXT(MONTH(R11),"MMMM")&" Of "&YEAR(R11)
I am trying to create a master spreadsheet to sum up other tabs for the number of funds that are going operational by month. The date is formatted at "January 31,2013".
See attachment as an example : Client Schedule Example.xlsx
I have a list of dates (birthdays) in column A. IE
12-Jan-69 05-May-75 23-Apr-81 16-Feb-70
When I use the normal sort function it sorts the dates in year order.
In Column B, I would like a formula that ignores the year and puts them in Month order that runs from Jan to Dec. Something I can print and stick on a wall as the list of birthdays.
i need to put a date into a month +year like this: 1/06/2008jun/08
i did this with a format date. After that i tried to copy/paste special values. So i can make i pivot table on the jun/08. But the problem is he still see it like a date.
MaandTotal jun/081jun/0810
he sees that 1/6/2008 is not the same as 2/6/2008 that is why i got 2 lines of jun
but i just want one and that he counts all the junes together
I am working on an excel sheet where I enter dates for registered events. I need to count the number of days registered for any month. For example, Column B contains date of event, column C contains number of events for that particular date.
I need to get the following results:
- How many dates registered in the Month of January (or any month), I assumed this is the number of dates that were entered for the month January.
- How manu events registered in the Month of January (or any month), I assumed this is the sum of the numbers in column C that match the dates of the month January.
I need the formula for this example because I have other counts I need to calculate per month, such as number of people registered, etc.
So I have some data that I would like to have average only if that data was entered in the same month and year as specified in another cell. What I have tried so far is:
[Code] .......
-RenewalMonths is a dynamic range where each cell in the range shows the month of the date in that row. -RenewalYears is the same but for the years. -RenewalOverallStuff is a dynamic range where I would need to average the data that meets the criteria.
I have a sheet where the columns have the month end date for each date, ex January 31,2014 February 28, 2014, March 31, 2014 etc. These dates are used in another formula to compare to the current date and if the current date is past the result is different from when if the date is in the future.
I would like a formula that would update the Month end date when we enter a new year. So for example once we get to January 1 2015 my date would change to January 31,2015, February 28, 2015, March 31, 2015. this would note be dependent on the system date but on the date in another cell.
