So I have some data that I would like to have average only if that data was entered in the same month and year as specified in another cell. What I have tried so far is:
[Code] .......
-RenewalMonths is a dynamic range where each cell in the range shows the month of the date in that row.
-RenewalYears is the same but for the years.
-RenewalOverallStuff is a dynamic range where I would need to average the data that meets the criteria.
I want it to average based on month and year. I have daily data and want to average everything for say January 2000 into one cell and February of 2000 and so on. Column A has date (mm/dd/yy) and column B has data.
I collect unique prices each day. I am trying to find a way to determine the average of the numbers collected from the 21st of the previous month to the 20th of the current month. This formula will need to calculate for multiple months and years. So for example, I need Feb2008 average-which would be the average of numbers found between Jan21-Feb20, I then need Mar 08 average which would be data from Feb21-Mar20 etc. My spreadsheet is setup with the first column having the dates (ex. 01/01/08, 01/02/08 etc) and the second column containing the value for that particular date ($2.85, $3.00 etc).
As the number of days between the 21st and 20th change each month, I just can't seem to find a way to do it without a whole lot of manual effort.
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then MsgBox ("You may not enter Data before the current Month") Else '...... Run main code here
i need to populate a field to show the month and year as follows: the data is entered in one field like this: 01/09/2006. i need another field to populate this: Jun 06. i have tried to use a few formulae but to avail. look forward to your response
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
I have been trying to sum the data in each column on each tab of my workbook by month and year into one pivot table on a new summary worksheet within the workbook. In the summary pivot table, I would like to be able to select the description as labeled on the tab and a year or month and have the respective totals for each tab and set of columns displayed. The column headings may or may not be the same for each tab. I've been able to separate the data for each tab and summarize without dates or sum the data in columns by date via a pivot table, but I have not been able to consolidate the data for both tabs, with the option to select the month and year, in one pivot table.
I have a detailed note inside biweekly.xls, it explains everything in context.
Two excel sheets, one is updated manually (Vikki's Yearly Averages.xls), while the other is for reporting (biweekly.xls)
The coding will all be in biweekly.xls.
First, it needs to take a date to the right of a name from biweekly.xls and use the month and year from that date for the search.
Then it needs to look in VYK.xls under the name and copy every entry starting in the year specified and month specified and ending at the current date.
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
... in A1 a year (say 2012) ... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
I'm trying to streamline some processes at work and have encountered a bit of an issue.
I have a source file containing a grid of data (9 columns) with a series of dates they relate to down the left side e.g. 13-Feb-2013. This data covers a whole year.
What I want to do is pull through data relating to a discrete month into a grid in a seperate workbook.
I have a feeling that date ranges and possibly some kind of lookup might be useful but am struggling to see how to pull it all together.
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
I have a workbook with two sheets - DATA and SUMMARY. DATA has two columns - date and data_value. Data will be added to this sheet on a regular basis
SUMMARY has two columns - month and average
In the column for average I would like a formula to calculate the average of data_value for each month without having to manually determine the range for the particular month.
I am trying to create a macro (pretty new) to take a sheet of data and out put the average of each column by date. The data will be filled every month and the numbers i need should be one for the 1st, the 2nd and so on for each day.
Here is a sample of the data in the sheet, i would attach a spreadsheet but cant seem to find out how.
TimeStampUTC Air Volts Dry Volts Dirt Dirt Fraction Temp
I use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
I have a spreadsheet that has columns of monthly values for three years of financial data and where the values for the latest month are added to the last column. Months that have not been completed will have a zero value (e.g. Jul-09).
Column A is "Customer Number" Column B is "Date Can Opened" Column C is "Month" (currently blank except header row) Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
As To Why This Is Giving The Answer Of "January Of 2009"? For All Answers. Sheet7
RS92/27/2009January Of 2009102/28/2009January Of 2009113/1/2009January Of 2009123/2/2009January Of 2009133/3/2009January Of 2009143/4/2009January Of 2009 Spreadsheet FormulasCellFormulaS10=TEXT(MONTH(R10),"MMMM")&" Of "&YEAR(R10)S11=TEXT(MONTH(R11),"MMMM")&" Of "&YEAR(R11)
I am trying to create a master spreadsheet to sum up other tabs for the number of funds that are going operational by month. The date is formatted at "January 31,2013".
See attachment as an example : Client Schedule Example.xlsx
I have a list of dates (birthdays) in column A. IE
12-Jan-69 05-May-75 23-Apr-81 16-Feb-70
When I use the normal sort function it sorts the dates in year order.
In Column B, I would like a formula that ignores the year and puts them in Month order that runs from Jan to Dec. Something I can print and stick on a wall as the list of birthdays.
