Entering Contents In Columns
Apr 23, 2009
I have a macro that does the following.
-Every time a cell in Column D contains New or Old, “Customer” is entered into Column G in the same row.
-Every time a cell in Column D contains Old2, “Assets” is entered into Column G in the same row.
-Every time a cell in Column D contains New2, “ShortTerm” is entered into Column G in the same row.
-Every time a cell in Column D contains Old3, “LongTerm” is entered into Column G in the same row.
Here is the macro.
View 5 Replies
ADVERTISEMENT
May 21, 2014
how to do the formula for highlighting whole row after entering a date in one of the columns.this spread sheet had over 300 rows so I can't do the conditional formatting, I need a formula for whole spreadsheet.
View 11 Replies
View Related
Mar 12, 2013
resolving a "not responding" problem that occurs when I try to enter data into a cell in one of two columns in my spreadsheet. These columns don't seem to be linked and I can't see a way of getting at where the problem might be coming from.
Is there a tried and tested method for trouble shooting something like this?
View 2 Replies
View Related
Jul 3, 2012
I am trying to get result in a column based on contents of previous 4 columns. For example as per table below, if there is value 1 in either of first 4 columns of same row, I want to display A in column 5. As first 4 columns in row 2 to 4 contains 1, result is A. If there is any 2 in first 4 columns, I want to display B. If there are both 1 and 2 in any first 4 columns, I want to display C. If there is 3 in any of first 4 columns, I want to display D. And if all 1, 2 and 3 are in any of first 4 columns, I want to display E.
NY1
NY2
NY3
[Code]....
View 2 Replies
View Related
Mar 18, 2013
Date formatting. I have two columns first column is for the date (3/6/2013) and the second column is for the time (12:37:16 AM). I would like to combine the content of both columns to be like (2/11/2013 12:35:00 AM) .
I am using concatenate but I don't have any luck. How to combine the content of my two columns.
View 4 Replies
View Related
Oct 21, 2013
I have a large number of Excel files with unique filenames that contain information I would like to add as columns to the actual spread sheet.
SPY_P_20131025_172.00_XX
I am trying to in break apart the above format with each of the above underscore separated fields being placed in there own column. How I would accomplish something like this?
...And if I wanted to perform this function on a large batch of files is there a tool I would need to automate the process?
View 6 Replies
View Related
Feb 7, 2007
I export data from another programme into excel and I wish to write a macro to copy the contents of columns G, H, I and J and paste it into columns A, B, C, D but starting at row 4. I then carry out various formatting tasks. I have written a macro that works for the copy and paste and the formatting but it only works when the data is the same length. The length of the data exported varies each time and so I am looking for some code that stops at a blank cell and copies the range above. I believe this uses xlup or xldown.
View 8 Replies
View Related
Jan 13, 2014
I am trying to create a formula that is able to calculate an end result based on the cell contents of 3 columns, the results are predefined in 3 other columns, here D, E & F
For example:
Column A Column B Column C Column D Column E Column F Column G (Results)
Royal Mail 1 100 2.8 2.3 1.2
Royal Mail 2 100 2.9 2.4 1.3
Royal Mail 3 100 3.0 2.5 1.4
DPD 5 200 4.5 2.8 1.5
DPOST 1 100 1.2 3.2 1.7
I am trying to create a calculation that in Column G will work out, IF Column A=Royal Mail AND Column B=1 AND Column C<=100 THEN Answer is [@[Column F]], IF Column A=Royal Mail AND Column B=2 AND Column C<=100 THEN Answer is [@[Column F]], IF Column A=Royal Mail AND Column B=3 AND Column C<=100 THEN [@[Column F]], IF Column A=DPD AND Column B=5 AND Column C<=200 THEN [@[Column E]], IF Column A=DPOST AND Column B=1 AND Column C<=100 THEN [@[Column D]]
Here are an example of what I have tried, amongst many...
=IF(AND(AND([@[Default Post Postal Service]]="Royal Mail"),AND([@[Default Postal Format]]=1),AND([@Weight]<=100)),1,0) Everything is zero.
View 4 Replies
View Related
Mar 24, 2013
I have a worksheet in which column A:C contains slno,name etc. Col D contains numerical data.D4:D5 is col heading. D6:D41 contains numerical data. I want to copy the data from D6:D37 only. for this i tried the following but with negative result.
1.select cell D5.
2.press F5 and enter -to goto cell D37.
3. press control and shift and up arrow to select the upper cells. Excel selects from D37 to D4 whereas i want it to be from D37:D6.selecting D6 and then press control shift and enter keys takes me to the last cell with the data in the column, ie,D41.
How can I select only the required cells so that i can copy the content.selecting the first cell and then dragging the cross is not an expected answer to solve this.
View 4 Replies
View Related
Jul 3, 2014
I am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
View 3 Replies
View Related
Jul 29, 2014
Below is my initial code that can't get past the first line.
if right(cells(2,i),4) = "D_MA" then ..... ?
I'm trying to clear the contents of all data in each column that has the text conaining "D_MA" in that columns row 2. For instance, if cell F2 has 30D_MA, I want the macro to clear all contents in Column "F" -- but to do this for all columns that contain "D_MA" in row 2.
View 8 Replies
View Related
Feb 9, 2009
Was looking into this, but basically i have a repetitive task of copying contents from various columns, and pasting them into 1 column.
1 right after the other. I figured there could be a way for a macro to copy contents from multiple columns and paste them into 1 column.
I have including 2 files, 1 from the start of the file, and 1 how it should be so it will have clarify what i am trying to do.
So basically if you open book1 , i have factory install tabs,
I need the columns contents from the first tab the (5k-20k) starting with Column B, then E, then H, and so on( Every 3rd column starting with B ) to be copied and pasted in Column A of the (Factory Install Tab) ( last tab ).
If you open the 2nd file this will be clearly understood. In the second file in the factory install tab you will notice i did the first 2. I highlighted each starting part in yellow just so its easier to see. SO in column A you should have all the contents in the 5k-20k tab ( starting with b every 3rd ), pasted in column A 1 after the other.
The next tab is the 30k tab, i need all of the columns contents copied starting with B ( every 3rd again ), copied in Column C of the Factory Install tab. Basically every tab's contents needs to have its own column in the Factory Install tab.
If anyone could help that would be great, this is a very time consuming process manually, and it would seem like a macro could be made to easily copy contents.
View 6 Replies
View Related
Jan 12, 2012
I frequently review DAT files. These DAT files use a variety of characters as delimiters. I'm trying to devise a macro that will perform a text-to-column operation, using the content of a specified cell as the delimiter.
Here's my code, which uses - (ASCII 0254) as a delimiter:
Code:
With Sheet1
Range("A1", ActiveCell.End(xlDown)).Select
Do
[Code]....
Instead of having the delimiter hard-coded, I'd like my macro to use whatever character I enter into Sheet3.Range("i5") as a delimiter. That way, I can easily change my delimiter character as necessary.
View 4 Replies
View Related
Jun 30, 2006
way to automatically hide a row or column based on a specified cell.
Or even something general like: Hide all rows with cells evaluating to #n/a.
View 9 Replies
View Related
May 2, 2008
I have created a desk planning spreadsheet in excel. Each week a mailmerge sends out an email to everyone in the office asking them to confirm when they will need a desk in the next week.
As the normal employee doesnt get involved in desk planning I want them simply to state whether they will be in the building or not by entering "GH" (our building) in a cell under each day in the email they get sent.
When the reply comes in we select the cells from the email and then paste them into the desk planning spreadsheet.
-----
WHAT I NEED TO DO:
Select some cells (must be in the same row - that we have just pasted in).
Press a button on the Worksheet labelled "Auto Assign Desk", which does this:-
For each cell that contains "GH", replace with the right-most cell to the left of the selection that starts "GH_"... (this is the start of a unique desk reference (GH_1_1, GH_1_2,etc.)
-----
This will assign the employee to the desk they were sat at last, when they are in the office next week.
View 7 Replies
View Related
Jun 9, 2014
I have two sheets:
- sheet 1 ('current')
- sheet 2 ('31May')
The data in column C is the same, although sorted differently and can't be re-sorted to be the same. Where the data in column C is the same in both sheets, I want to fill columns A and B into sheet 1.
View 4 Replies
View Related
Dec 30, 2013
I have attached a workbook stating my problem.
file1.xlsx‎
View 10 Replies
View Related
Jan 14, 2013
I am trying to combine the contents of two cells depending on the contents of another, I have tried to use the If function but am coming up stuck!
I have provided a link to the example file below:
[URL]
View 4 Replies
View Related
Feb 21, 2007
I need a cell to read $0.00 always even if the cell is deleted. so if blank = $0.00.
Here is what I thought would work but doesn't.
Sub Worksheet_Change(ByVal Target As Range)
Range("b5").Value = 0
End Sub
View 9 Replies
View Related
Oct 1, 2008
Has anyone come accross any smart and time saving alternatives to enter =NA() in any empty cells.
View 9 Replies
View Related
Dec 7, 2009
In some of my formulas, I need to re-enter the contents of the cell in order for a formula to compute.
For example, I am doing some math on a cell whose original contents are "10:21:00 AM" The formula returns a #NUM!. If I retype 10:21 in the cell and hit enter, the formula will now calculate properly. I have reformatted the entire column several times so that it is a custom hh:mm format. The original content also shows as time so I don't think that it is a formatting issue.
My worksheet has about 20,000 rows and this only happens for about 100 of the rows. It is pretty time consuming to manually go fix each one. Any ideas what is going on here?
View 6 Replies
View Related
Sep 12, 2013
I'm trying to get a formula that will enter a particular value when 2 specific criteria are met. I've been trying to use an =IF(AND( statement, but so far I keep getting a "the formula you typed contains an error" message.
I need to have cell V9 return a value of 8 if the following conditions are met:
Cell D9 = "SG"
Cell H8 of a different workbook (Called Work Schedule) = 3
I would like the value of V9 to change to 12 if:
Cell D9 = "SG"
Cell H8 of 'Work Schedule' = 19
My formula now looks like this:
=IF(AND(D9="SG",'WORK SCHEDULE'!H8=3,8,IF(AND(D9="SG",'WORK SCHEDULE'!H8=19,12,""))))
View 6 Replies
View Related
Dec 18, 2008
If I use format cells and choose time... do I have to enter the time in decimals to get it to show up like 1:30 PM? Or is there a way for me to type something quicker like 130 p?
View 9 Replies
View Related
Mar 2, 2009
I'm trying to copy about 10,000 barcode over to a new spreadsheet, the prob is that when I copy them over they appear as XXXX+12 and then when I try and use them it doesn't like it. I can solve it if I format the column to text - and then double click it. This is ok for a hundred or so but fingers start to hurt after that!
View 14 Replies
View Related
Apr 9, 2009
I would like to be able to choose a month (from a drop down menu), then choose who the payment will go to ie. creditor (from a drop down menu) ie. car, truck, cc payment, as a result of those selections, then enter the amount of the payment, and finally the ending balance will appear. I have the drop down menus in place and I have all the balance calculations in place. I could use the spreadsheet that I have but I only want to see the below info. Plus I don't know how to link or lookup this data to the stuff I've already created.
Select Month:
Select Creditor:
Enter Payment:
New Balance:
I have already set the sheet up calculating the balances after a payment has been made. I know how to hide all the formulas, but I don't know how to get it to so that you choose a month, then creditor type (from drop down menus), and payment so that you see a new balance. I only want to be able to link or lookup the month, creditor together so that a payment can be made to that cell that I've already established. As a result, then that cell can be shown in the new balance.
View 14 Replies
View Related
May 4, 2009
I really DO have a problem. I need excel to create me a list of whenever someone enters their name. Now, this may sound simple, but, the text in the list CANNOT be allowed to be overwritten.Also the text needs to be entered into the NEXT empty cell between C30 and C50. This is basically so I can keep a record of whenever anybody does anything/modifies the cells that include text between S7 andS21
So basically if text is ever entered into S7 all the way down to S21, I need an automatic copy created into the next available cell between C30 and 390. It is also ok if there are duplicates values(names).
I would give a print screen, but I don't know where the attach button is on this forum.
View 11 Replies
View Related
Aug 19, 2009
I'm building a database which I intend to upload to an ecommerce website. I am retrieving information on some of our products from the manufacturer's website. The information appears on the manufacturer's website as follows:
Part No : DP9970
* Description : Disc Pads
* Manufacturer : Trupart
* Unit Of Sale : Boxed Set
* Width (mm): 130
* Height (mm): 62
* Thickness (mm): 19
* Note: 4 pads with top clip
When I copy and paste this info into excel, it gives each individual line of information a separate cell. I need the information to appear in one cell in order for it to display properly on my website.
View 4 Replies
View Related
Oct 20, 2009
I need to find a way to enter times into excel without having to use a colon.
The data I need in the cell is the hour, the minute, and either AM or PM. No seconds, which I believe is why Chip Pearson’s time VBA procedure doesn’t work for me, and I don’t know enough about VBA to change it for my needs.
So for example, I need to enter in times like 10:09 PM or 12:40 AM or 2:33 AM.
All my times will be entered into Column D.
I have done a ton of searching and tried several different solutions, but none of them allow me to put in AM or PM. If I just put 1009 into a cell with Chip Pearson’s macro, it will display as 10:09 AM, which is great if I need it to be AM. But if I need it to be PM, and I enter in “1009 p”, it will display as “1009 p”, neglecting the colon and not displaying the time correctly.
Does anyone have a solution where I can type in a 3 or 4 digit number (233 or 1240) and either “a” or “p” after it, and have it display as 2:33 PM or 12:40 AM?
I use Excel 2007, if it matters.
View 12 Replies
View Related
Dec 10, 2013
In simplicity: We want to be able to enter a value in cell A1 (and hit enter), but we want the value in A1 to be increased by the value saved in H1.
So: if H1 had 250 saved in it, if we enter 150 in A1 (and hit enter), we want the value in A1 to become 400.
View 2 Replies
View Related
Jan 8, 2014
I work in a fruit and veg business and they are using parchment and quill still, well it certainly feels that way. I have been asked by customers to provide an online order form which i will email to them and they can fill in and email back, i scanned an invoice and used OCR to upload it to excel and it has come out quite well.
Basically there are three columns of product lines and then directly to the right of each product is a column i have entitled Box & KG respectively, if the customer types a number into the box column i want it to automatically add 'Bx' to the end so this if they typed 5 in a cell in the box column it would look like this '5 Bx' (obviously without the quotes), and the same for the KG column but it would denote 5 KG instead, also i would want it to add in the space as well after the value.
View 3 Replies
View Related
